BDI CENTRO 6402 User Manual

CENTROTM 6402

RETURN

bdiusa.com

[e-mail]

Product Registration

Registering your new BDI product allows us to send you
important product updates, service information and helpful
hints related to your BDI products. Register today and you will
be entered to win free a BINK table from BDI. www.bdiusa.
com/product-registration/

Placement and Maintenance

Centro™ Office furniture is designed for indoor use on level
floors. Clean glass with glass cleaner, and steel parts and
wood veneer with a moist cloth.

Your Centro™ Office furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet.
For missing hardware pieces, please contact BDI Customer
Service at [e-mail]. For all other
concerns, please contact your BDI retailer.

T1 4mm Hex Wrench

H6 1/4-20 x 12 mm Screw x 2

H7 1/4-20 x 38 mm Screw x 4

H8 1/4-20 x 61 mm Screw x 4

H19 Leveler Glide x 2

H11 Cord Wrap x 3

H12 - Snap Fastener x 3

H13 Bumper x 2

C1 -

Glass Panel x 1

C2 - Frame Assembly x 1

- Leg x 1

C3

Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Centro & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in Taiwan. 01.08.2016 V1

Step 1 - Install Glides H10 to the bottom of Leg C3. Attach Leg C3 to Frame Assembly C2 with Screws H7.

H10 (x2)

H7 (x4)

C3

Step 2 - Install BDI Cord Wraps H11 using Snap Fasteners H12 into hole locations as shown. Install
Bumpers H13 into holes as shown.

H11 (x3)

H13 (x2)

H13

H13

H12 (x3)

2

CENTRO 6402
RETURN

bdiusa.com

[e-mail]