Page 1
CORRIDORTM 6520
MULTIFUNCTION CABINET
bdiusa.com
customerservice@bdiusa.com
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Corridor® Office furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.
Your Corridor® Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI retailer.
C1 Glass Panel
T1 4mm Hex Wrench
H1 1/4-20 x 12mm
Machine Screw x 12
H2 M4 x 37mm Machine
Screw x 8
H3 1/4-20 x 63mm
Machine Screw x 2
H4 Bumper x 6
C2 Pull x 4
C4 Small File Bar x 2
C5 Large File Bar x 1
A1 Cabinet
C8 Left Leg
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in China. 02.05.2016 V2
C7 Base Stretcher
C9 Right Leg
C6 File Bar Clip x 4
Tool Required:
Phillips screwdriver
Page 2
Step 2 - Build Base Assembly
Slide Metal Leg C3 into Metal Rail C7 and attach by using Hex Wrench T1 and Screw H1.
C8
C7
Æ
H1 (x4)
Step 3 - Attach Base Assembly to Cabinet using Screws H1 and H3 and tighten with Hex Wrench.
C9
Æ
H3
H3
H1 (x8)
2
CORRIDOR 6520
MULTIFUNCTION CABINET
H3 (x2)
bdiusa.com
customerservice@bdiusa.com
Page 3
Step 4 - Install Bumpers H4 at locations shown.
Step 5 - Carefully position Glass Panel C1 flush with the edges of cabinet.
C1
H4 (x6)
Step 6 - Attach pulls to cabinet door and drawers using Screws H2 and tighten with Phillips screwdriver.
H2 (x8)
3
CORRIDOR 6520
MULTIFUNCTION CABINET
customerservice@bdiusa.com
bdiusa.com
Page 4
Step 7 - File Bar Installation (Option A)
For files facing forward, attach File Bar Clip C6 to both ends of Small File Bar C4 as shown.
For letter files, use the outer notches on the front and back of the drawer. For legal files, use the inner notches.
C4
Inner Notch
(Legal File)
Outer Notch
(Letter File)
C4
C6
Step 8 - File Bar Installation (Option B)
For files facing sideways, attach File Bar Clip C6 to both ends of Large File Bar C5 as shown. Place the
file bar assembly in the notches located on the left and right drawer side panels. For side facing legal files, skip
this step altogether.
C6
C5
4
CORRIDOR 6520
MULTIFUNCTION CABINET
customerservice@bdiusa.com
bdiusa.com
Page 5
Corridor file cabinets are pre-assembled with matching locks. If you require unique locks for your home or office
use, please contact BDI Customer Service at customerservice@bdiusa.com to purchase a unique lock and key
replacement kit which includes a lock assembly and two keys. To replace the lock please follow the instructions
below.
Optional - Lock Removal and Installation
1. Open the drawer which houses the lock.
2. Using a Phillip’s screw driver, loosen the 2 screws that secure the lock assembly to the back of the drawer
facia panel.
3. Replace it with the new lock assembly and re-tighten the 2 screws.
Tool Required:
Phillips screwdriver
5
CORRIDOR 6520
MULTIFUNCTION CABINET
customerservice@bdiusa.com
bdiusa.com
Loading...