BDI AAGE1127 Installation & Assembly

REVEAL

END TABLE

INSTRUCTION MANUAL

™

1196

LET’S GET STARTED.

DESIGN MATTHEW WEATHERLY

Congratulations on the purchase of your Reveal End Table 1196 from BDI. Your end table

has been designed to provide a lifetime of enjoyment. This manual will provide you with

assembly instructions and other helpful information to ensure that you get the most out

of your product. Please save it for future reference.

Your Reveal End Table has been engineered for simple assembly. Please follow these

directions carefully to prevent any damage.

Should you need further assistance, contact BDI at [e-mail].

ENJOY!

BDIUSA.COM | 3NEED ASSISTANCE? [e-mail]

HARDWARE AND COMPONENTSHARDWARE AND COMPONENTS

Unpack and identify the parts listed below. The assembly workspace should be a non-marring
surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at
[e-mail].

Do not use power tools for the assembly of this product.

For all other concerns, please contact your BDI retailer.

PART #

DESCRIPTION

QUANTITY

PART #

DESCRIPTION

QUANTITY

T1

Hex Wrench

1

H1

M6 x 30mm Screw

10

PART #

DESCRIPTION

QUANTITY

PART #

DESCRIPTION

QUANTITY

T2

Leveler Wrench

1

H2

M6 x 12mm Screw

4

PART #

DESCRIPTION

QUANTITY

4 | BDIUSA.COM REVEAL 1196

C1

Upper Frame

1

PART #

DESCRIPTION

QUANTITY

C2

Leg Frame

2

HARDWARE AND COMPONENTS HARDWARE AND COMPONENTS

PART #

DESCRIPTION

QUANTITY

PART #

DESCRIPTION

QUANTITY

C3

Lower Frame

1

C4

Case

1

PART #

DESCRIPTION

QUANTITY

PART #

DESCRIPTION

QUANTITY

C5

Shelf Glass

1

C6

Top Glass

1

BDIUSA.COM | 5NEED ASSISTANCE? [e-mail]

ASSEMBLY

STEP 1. ATTACH LEGS

Attach the (C2) Legs to the (C1) Upper Frame
using 3 (H1) Screws per leg. Tighten with

(T1) Hex Wrench.

C2

PART/DESCRIPTION QTY

T1-HEX WRENCH 1

H1-SCREW 6

H1

H1

C1

C2

H1

H1

H1

H1

6 | BDIUSA.COM REVEAL 1196

STEP 2. ATTACH LOWER FRAME

ASSEMBLY

Attach the (C3) Lower Frame to the (C2) Legs using 4 (H2) Screws. Tighten with (T1) Hex Wrench.

PART/DESCRIPTION QTY

H2

T1-HEX WRENCH 1

H2-SCREW 4

H2

C3

Rubber bumper

H2

H2

should point

C2

STEP 3. ATTACH CASE

down

ASSEMBLY

Place the (C4) Case upside down on the floor. Lift and place the Base Assembly on top of the
(C4) Case. Fasten with 4 (H1) Screws. Tighten with (T1) Hex Wrench.

C2

PART/DESCRIPTION QTY

T1-HEX WRENCH 1

H1-SCREW 4

H1

H1

H1

H1

C4

BDIUSA.COM | 7NEED ASSISTANCE? [e-mail]

2 PERSON TASK

ASSEMBLY

With help from another person, carefully rotate the table onto its base. Move the (C5) Shelf Glass
into position by sliding it in from the end of the Base. The (C5) Shelf Glass can be identified via a
sticker on the bottom surface.

STEP 4. INSTALL SHELF GLASS

C5

ASSEMBLY

Place (C6) Top Glass on the rubber bumpers on top of the Case. The (C6) Top Glass can be
identified via a sticker on the bottom surface.

STEP 5. INSTALL TOP GLASS

C6

8 | BDIUSA.COM REVEAL 1196

LEVEL TABLE

FINE TUNING

Make sure the table is level. Adjust one or more
of the levelers using (T2) Leveler Wrench to
attain a level stance.

PART/DESCRIPTION QTY

T2-LEVELER WRENCH 1

down

BDIUSA.COM | 9NEED ASSISTANCE? [e-mail]

CARE & MAINTENANCE

GLASS

The glass surface is maintained using household glass cleaner and a paper towel or cloth.

SATIN-ETCHED GLASS

This uniquely smooth-to-the-touch glass surface can be regularly maintained using household glass
cleaner and a paper towel or cloth. Minor scratches or scuffs not eliminated using paper towel or
cloth can usually be removed by using a ‘Magic Eraser’. Magic Eraser is a melamine foam product
available at any grocery store or home improvement center. Dampen the entire glass surface and the
Magic Eraser, then rub the entire glass surface in broad, even strokes using moderate pressure. Clean
and dry the surface with a paper towel. Check for results and repeat as necessary.

Any scratches or scuffing not eliminated by one of the above methods can often be addressed by
‘refreshing’ the glass. This is a process that should not be required more than once per 6-12 months.
See this brief video for the simple method: www.bdiusa.com/glass

WOOD

Wood surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. Do not
use glass cleaner on wood. If moisture remains, dry the surface with another cloth. If needed, a
gentle non-abrasive cleanser may be used, but be sure to wipe away all cleaner residue and dry the
surface with a cloth.

BDI’s wood finishes feature natural hardwood solids and veneers. Wood is a product of nature and—
unlike man-made materials that can be manufactured to strict and consistent specifications—has
natural imperfections that are part of its appeal and character. Every piece of wood differs from
every other, even when coming from the very same tree. As such, variation in grain, texture and tone
should be expected from one panel or piece of furniture to the next.

While BDI’s stained wood finishes are stable in tone & appearance, all finishes are subject to some
degree of discoloration with prolonged exposure to direct sunlight. Please take care to avoid
positioning your BDI cabinet in any area with extensive direct sunlight. To learn more about the
features of natural wood, visit www.bdiusa.com/wood

METAL & PAINTED SURFACES

Surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. If moisture
remains, dry the surface with another cloth. If needed, a gentle non-abrasive cleanser may be used,
but be sure to wipe away all cleaner residue and dry the surface with a cloth.

10 | BDIUSA.COM REVEAL 1196

WARRANTY

BDI warrants to the original purchaser that for the below-stated warranty term, BDI will repair or
replace any product, part, or component covered by this warranty that fails under normal use as a
result of a defect in material or workmanship. BDI will repair or replace the aforementioned product,
part or component with a comparable product, part or component. The decision to repair or replace
will be at BDI’s sole discretion.

BDI Home Theater Furniture, Office Furniture, Modular Systems, Tables, and other furniture pieces are
warranted for three (3) years from the date of purchase as shown on your sales receipt. The warranty
period starts from the date of purchase. This warranty extends only to the original purchasers who
acquire new products from BDI Authorized Resellers. Any product, part, or component must have
been assembled, installed, used, and maintained according to BDI’s published instructions to be
eligible for warranty coverage. Any modification to the original product voids the warranty.

To view BDI’s complete warranty information, visit www.bdiusa.com/warranty

PRODUCT REGISTRATION

Registering your new BDI product allows us to send you important product updates, service
information, and helpful hints related to your BDI products. Register today, and you will be entered
to win free a BINK table from BDI: www.bdiusa.com/register

BDIUSA.COM | 11NEED ASSISTANCE? [e-mail]

These distinctive product configurations are protected by US and international patents, trade
dress, and/or copyright laws. Reveal & BDI are trademarks of Becker Designed, Inc. All rights
reserved. ©2022, BDI | V.03.03.2022

Made in Turkey.