Page 1
SOMA
COMPACT LIFT DESK
™
6331
INSTRUCTION MANUAL
LET’S GET STARTED.
DESIGN JEFF BARE
Page 2
Congratulations on the purchase of your Soma Compact Lift Desk 6331 from BDI. Your
compact lift desk has been designed to provide a lifetime of enjoyment. This manual will
provide you with assembly instructions and other helpful information to ensure that you
get the most out of your product. Please save it for future reference.
Your Soma Compact Lift Desk has been engineered for simple assembly. Please follow
these directions carefully to prevent any damage.
Should you need further assistance, contact BDI at customerservice@bdiusa.com.
ENJOY!
Page 3
HARDWARE AND COMPONENTS HARDWARE AND COMPONENTS
Unpack and identify the parts listed below. The assembly workspace should be a non-marring
surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at
customerservice@bdiusa.com.
Do not use power tools for the assembly of this product.
For all other concerns, please contact your BDI retailer.
PART #
DESCRIPTION
QUANTITY
PART #
T1
Hex Wrench
1
PART #
DESCRIPTION
QUANTITY
C1
H1
M6 x 20
Screw
7
PART #
DESCRIPTION
QUANTITY
H2
M4 x 16
Screw
2
PART #
DESCRIPTION
QUANTITY
PART #
H3
#6 x .5"
Wood Screw
2
C2
DESCRIPTION
QUANTITY
PART #
DESCRIPTION
QUANTITY
C3
Bottom Plate
1
Top Panel
1
PART #
DESCRIPTION
QUANTITY
C4
KLEET
1
DESCRIPTION
QUANTITY
TOOL REQUIRED
(NOT INCLUDED)
Phillips Screwdriver
Lift Column
1
BDIUSA.COM | 3NEED ASSISTANCE? customerservice@bdiusa.com
Page 4
STEP 1. ATTACH LIFT COLUMNASSEMBLY
Place the (C1) Top Panel upside down on a soft,
flat surface. Place the (C2) Lift Column on the
(C1) Top Panel and ensure it is in the correct
orientation. The triangle of threaded holes in the
bottom of the (C2) Lift Column should point
toward the front edge of the (C1) Top Panel
(with the finger groove).
Attach the (C2) Lift Column to the (C1) Top
Panel using 4 (H1) M6 X 20 Screws and tighten
with (T1) Hex Wrench.
The Lift Lever can be attached on either side or
the front edge of the (C1) Top Panel. Attach the
Lift Lever with 2 (H2) M4 X 16 Screws. Tighten
with Phillips Screwdriver.
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H1-SCREW 4
H2-SCREW 2
NOT INCLUDED
Phillips Screwdriver
Ensure the triangle of
threaded holes points
toward the finger groove
on the front edge of the
Top Panel
1
H2
C2
H1
H1
C1
4 | BDIUSA.COM SOMA 6331
Page 5
2 PERSON TASK
STEP 2. ATTACH BOTTOM PLATE
Attach the (C3) Bottom Plate to the (C2) Lift
Column using 3 (H1) M6 X 20 Screws. Tighten
with (T1) Hex Wrench.
C3
ASSEMBLY
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H1-SCREW 3
H1
C2
BDIUSA.COM | 5NEED ASSISTANCE? customerservice@bdiusa.com
Page 6
2 PERSON TASK
STEP 3. ATTACH KLEETASSEMBLY
The (C4) KLEET can be attached on either the
right or left side of the (C1) Top Panel. Attach
the (C4) KLEET using 2 (H3) Wood Screws.
Tighten with Phillips Screwdriver.
With help from another person, carefully flip the
desk over onto its base.
Use the KLEET for
wire management
PART/DESCRIPTION QTY
H3-SCREW 2
NOT INCLUDED
Phillips Screwdriver
1
H3
C4
6 | BDIUSA.COM SOMA 6331
Page 7
CARE & MAINTENANCE
Your BDI furniture has been constructed with the finest materials, manufactured with care and is
designed to last a lifetime. Regular care of your furniture will prolong your enjoyment and keep it
looking its best. Here are some general tips for taking care of BDI furniture. Your surfaces may vary.
GLASS
The glass surface is maintained using household glass cleaner and a paper towel or cloth.
SATIN-ETCHED GLASS
This uniquely smooth-to-the-touch glass surface can be regularly maintained using household glass
cleaner and a paper towel or cloth. Minor scratches or scuffs not eliminated using paper towel or
cloth can usually be removed by using a ‘Magic Eraser’. Magic Eraser is a melamine foam product
available at any grocery store or home improvement center. Dampen the entire glass surface and the
Magic Eraser, then rub the entire glass surface in broad, even strokes using moderate pressure. Clean
and dry the surface with a paper towel. Check for results and repeat as necessary.
Any scratches or scuffing not eliminated by one of the above methods can often be addressed by
‘refreshing’ the glass. This is a process that should not be required more than once per 6-12 months.
See this brief video for the simple method: www.bdiusa.com/glass
WOOD
Wood surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. Do not
use glass cleaner on wood. If moisture remains, dry the surface with another cloth. If needed, a
gentle non-abrasive cleanser may be used, but be sure to wipe away all cleaner residue and dry the
surface with a cloth.
BDI’s wood finishes feature natural hardwood solids and veneers. Wood is a product of nature and—
unlike man-made materials that can be manufactured to strict and consistent specifications—has
natural imperfections that are part of its appeal and character. Every piece of wood differs from
every other, even when coming from the very same tree. As such, variation in grain, texture and tone
should be expected from one panel or piece of furniture to the next.
While BDI’s stained wood finishes are stable in tone & appearance, all finishes are subject to some
degree of discoloration with prolonged exposure to direct sunlight. Please take care to avoid
positioning your BDI cabinet in any area with extensive direct sunlight. To learn more about the
features of natural wood, visit www.bdiusa.com/wood
METAL, PORCELAIN, & PAINTED SURFACES
Surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. If moisture
remains, dry the surface with another cloth. If needed, a gentle non-abrasive cleanser may be used,
but be sure to wipe away all cleaner residue and dry the surface with a cloth.
BDIUSA.COM | 7NEED ASSISTANCE? customerservice@bdiusa.com
Page 8
WARRANTY
BDI warrants to the original purchaser that for the below-stated warranty term, BDI will repair or
replace any product, part, or component covered by this warranty that fails under normal use as a
result of a defect in material or workmanship. BDI will repair or replace the aforementioned product,
part or component with a comparable product, part or component. The decision to repair or replace
will be at BDI’s sole discretion.
BDI furniture is warranted for three (3) years from the date of purchase as shown on your sales
receipt. The warranty period starts from the date of purchase. This warranty extends only to the
original purchasers who acquire new products from BDI Authorized Resellers. Any product, part,
or component must have been assembled, installed, used, and maintained according to BDI’s
published instructions to be eligible for warranty coverage. Any modification to the original
product voids the warranty.
To view BDI’s complete warranty information, visit www.bdiusa.com/warranty
PRODUCT REGISTRATION
Registering your new BDI product allows us to send you important product updates, service
information, and helpful hints related to your BDI products. Register today, and you will be entered
to win free a BINK table from BDI: www.bdiusa.com/register
These distinctive product configurations are protected by US and international patents, trade
dress, and/or copyright laws. Soma & BDI are trademarks of Becker Designed, Inc. All rights
reserved. ©2022, BDI | V.03.30.2022
Made in China
Loading...