BDI AAGE1035 Installation & Assembly

SIGMATM 6917

MULTIFUNCTION CABINET

bdiusa.com

[e-mail]

Product Registration

Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/

Placement and Maintenance

Sigma™ Office furniture is designed for indoor use on level floors.
Clean glass with glass cleaner and other surfaces with a moist cloth.

Your Sigma™ Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage. Do not use power tools for
assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at:
[e-mail].
For all other concerns, please contact your BDI retailer.

Tool Required:

Phillips Screwdriver

H1 Phillips M4
Screw x 20

C6 File Bar Clip x 6

C4 Small File Bar x 2

Designed by BDI Studio.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Sigma & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI
Made in Turkey.02.18.2019

C5 Large File Bar x 1

C1 Glass Top x 1

A1 Cabinet x 1

C7 Swivel Caster

x 5

Step 2 - Before installing the glass, lay Cabinet on its back. Attach 5 swivel casters C7 to the bottom of the
cabinet using screws H1 and tighten with a Phillips Screwdriver.

H1 x 20

C7 x 5

Step 3 - With help from another person, stand the cabinet onto its wheels.
Step 4 - Position the glass panel on top of the cabinet and align all edges (the glass should be inset 1/16” or

1.5mm along each edge).

2 Person Ta sk

1.5 mm

2

SIGMA 6917
MULTIFUNCTION CABINET

[e-mail]

bdiusa.com