BDI AAGE1034 Installation & Assembly

SIGMATM 6916

LATERAL FILE CABINET

bdiusa.com

[e-mail]

Product Registration

Registering your BDI product allows us to provide you with important
product updates, service information and helpful advice. Register today,
and you’ll be entered to win a free gift from BDI: bdiusa.com/register

Placement and Maintenance

Sigma™ Office furniture is designed for indoor use on level floors. Clean
glass with glass cleaner, and other surfaces with a damp cloth.

Your Sigma™ Office furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI retailer.

Tool Required:

Phillips Screwdriver

H1 Phillips M4
Screw x 20

C4 Small File Bar x 4

C5 Large File Bar x 2

Designed by BDI Studio.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Sigma & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI
Made in Turkey. 02.18.2019

C6 File Bar Clip x 8

C1 Glass Top x 1

A1 Cabinet x 1

C7 Swivel Locking Casters

x 5

Step 2 - Before installing the glass, carefully lay the cabinet on its back. Attach casters C7 to Cabinet A1
using Screws H1 and tighten with a Phillips Screw Driver.

H1 x 20

C7 x 5

Step 3 - With help from another person, stand the cabinet onto its wheels.
Step 4 - Position the glass panel on top of the cabinet and align all edges.

The glass should be inset 1/16” (1.5mm).

2 Person Ta sk

1.5 mm

2

SIGMA 6916
LATERAL FILE CABINET

[e-mail]

bdiusa.com

Step 5 - Casters - The casters can be locked by pressing the lever downward and released by pressing the
lever upward.

Step 6 - File Bar Installation (Option A)

For files facing forward, attach File Bar Clip C6 to both ends of Small File Bar C4 as shown.
For letter files, use the outer notches on the front and back of the drawer. For legal files, use the inner notches.

Use this notch

for legal files

C6 x 4

C4 x 2

3

SIGMA 6916
LATERAL FILE CABINET

[e-mail]

bdiusa.com

Step 7 - File Bar Installation (Option B)

For letter files facing sideways, attach File Bar Clip C6 to both ends of Large File Bar C5 as shown. Place
the file bar assembly in the notches located on the left and right drawer side panels. For side facing legal files,
skip this step altogether.

C6

C5

C5

4

SIGMA 6916
LATERAL FILE CABINET

[e-mail]

bdiusa.com