Page 1
Component List
Assembly Hardware (A) Totem - Model 9930
(A4) 1/4-20 x 15mm Screw (x4)
(A7) Leveler Glide (x4) (A9) 5/16-18 x 10mm Screw (x10) (A1) 4mm Allen Whrench (x1)
(A8) 5/16-18 x 48mm Screw (x8)
(B1) M5 x 15mm
Machine Screw (x4)
(B2) M6 x 15mm
Machine Screw (x4)
Soundbar Speaker Hardware (C) Totem - Model 9930
(C1) 8mm ID x 20mm OD
Washer (x4)
(C2) 6mm ID x 19mm OD
Washer (x4)
Shelf Assembly Hardware (D) Totem - Model 9930
(A6) 5/16-18 Binding Post (x4)
(A5) Adjustment Disc (x2)
TV Mounting Hardware (B)
(B4) 8mm ID x 20mm OD
Washer (x4)
(C5) M5 Nut (x2)(C3) M3 Nut (x2) (C9) M5 x 15mm
(D1) 5/16-18 x 40mm
FH Screw (x2)
(D2) 1/4-20 x 15mm
Screw (x4)
(B3) M4 x 15mm
Machine Screw (x4)
(C7) M3 x 15mm
Machine Screw (x2)
Machine Screw (x2)
(D3) 4mm Allen Whrench (x1)
(A3) 5/16-18 Flange Nut (x2)(A10) Neoprene Strip (x4)
(B5) M8 x 15mm
Machine Screw (x4)
(B6) 6mm ID x 19mm OD
Washer (x4)
(C4) M4 Nut (x2)(C6) M6 Nut (x2)
(C8) M4 x 15mm
Machine Screw (x2)
(C10) M6 x 15mm
Machine Screw (x2)
(D4) 5mm Allen Whrench (x1)
(A2) 5mm Allen Whrench (x1)
totem
9930
A - Assembly
Hardware Kit
x 1
B - TV Mounting Kit
x 1
C - Soundbar
Speaker Kit x 1
D - Shelf Assembly Kit
x 1
assembly instructions
bdiusa.com customerservice@bdiusa.com
Your Totem Pedestal is engineered for easy assembly. Carefully follow
this procedure to prevent any damage.
Placement and Maintenance
Totem is designed for indoor use on level floors. Clean steel and glass
parts with a moist cloth.
Tools Needed: Phillips Screwdriver
Step 1
Unpack and identify the components at left and below. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service at
customerservice@bdiusa.com. For all other concerns, please contact
your BDI Retailer.
G - Swiveling Bracket x 2
H - Horizontal Mounting
Bracket
x 1
I - Vertical Mounting
Bracket
x 2
JL - Speaker Bracket Arm
x 1
JR - Speaker Bracket Arm
x 1
K - Universal Speaker
Bracket
x 1
N - Upper Cover Panel x 1
F - Vertical Column x 1
LL - Shelf Arm x 1
LR - Shelf Arm x 1
M - Glass Shelf x 1
Designed by Matthew Weatherly.
These distinctive product congurations are protected by US and international patents,
trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2014, BDI
Made in China. 081114v1
O - Lower Cover Panel x 1
E - Base x 1
1
Page 2
Step 2
Screw Leveler Glides (A7) into Base (E).
A7
A7
A7
A7 x 4
E
Step 3
With the Vertical Column (F) laying on its back, attach Base (E)
using Screws (A8) and 5mm Allen Wrench (A2), provided in
Assembly Hardware Kit (A).
F
E
A8
A8
totem
99 30
A2
5mm Allen Wrench
A8 x 4
F
A8
A8
E
2
assembly instructions
bdiusa.com customerservice@bdiusa.com
A8
A8
Page 3
Step 4
Rest the Assembly on its side and finish attaching Base (E) to
Vertical Column (F) using Binding Post (A6) from the bottom of
Base (E) and remaining Screws (A8) from the top. Use both 5mm
Allen Wrenches (A2 and D4) to tighten screws.
E
F
A6 x 4
A8 x 4
A2,D4 - 5mm Allen
Wrench
A8
A8
A6
A6
Step 5
Place Pedestal upright and attach each Swiveling Bracket (G) to top of
Vertical Column (F) with Screws (A9) and 5mm Allen Wrench (A2).
NOTE: There are two (2) mounting-height positions to
choose from. In general, for larger TV’s (60” – 70”) select the
higher set of mounting holes, smaller TV’s (45”- 60”) select
the lower set of mounting holes.
F
A8
A8
A6
A6
E
G
totem
99 30
G
A9
5mm Allen Wrench
A9
A9
F
3
assembly instructions
bdiusa.com customerservice@bdiusa.com
A2
A9 x 4
Page 4
Step 6
Peel film from side of Neoprene Strip (A10) and attach to the outer edge of
each Swiveling Bracket (G) as illustrated below.
A10
G
F
G
A10
A10 x 4
Neoprene Strip
Step 7
Attach Horizontal Mounting Bracket (H) to installed Swiveling
Brackets (G) with Screws (A9) and 5mm Allen Wrench (A2).
NOTE: Slots along Horizontal Mounting Bracket (H)
must be at BOTTOM. Be sure to position Swiveling
Bracket (G) so that each sits within recessed portion of
the Horizontal Mounting Bracket (H). (Circled below)
G
G
A9
A9
5mm Allen Wrench
A2
2 Person Task
H
G
A9
totem
99 30
H
A9 x 4
4
assembly instructions
bdiusa.com customerservice@bdiusa.com
Page 5
Step 8
Position each Vertical Mounting Bracket (I) on back of TV and
attach using mounting screws and washers (if required) provided
in TV Mounting Kit (B). Each bracket must align vertically with
the other. Both can be raised or lowered on back of TV at 1”
increments.
NOTE: Various mounting screws
are provided in TV Mounting
Kit (B), but some TVs may
I
require specic hardware
not provided by BDI. In such
cases, please contact your TV
manufacturer to identify and
source your hardware.
Install Leveling Disc (A5)
onto threaded posts of Vertical Mounting
Bracket (I).
I
I
Step 9
With the help of another person, lift television with installed
Vertical Mounting Brackets (I) and lower carefully onto
Horizontal Mounting Bracket (H).
I
I
I
A5 x 2
2 Person Task
totem
99 30
I
H
5
assembly instructions
bdiusa.com customerservice@bdiusa.com
A5
H
Page 6
Step 10
Level the TV using the Leveling Discs (A5) near the slots in the
lower Horizontal Mounting Bracket (H). Then secure into place
using provided Flange Nut (A3).
Step 11
Install Speaker Bracket Arms (JL, JR) to Pedestal using
Screws (A4) and 4mm Allen Wrench (A1).
NOTE: There are several soundbar-height positions
to choose from on 2” increments. The soundbar
speaker should be located as close to the bottom
of the TV as possible when attached.
A1
4mm Allen Wrench
A4
A5
JR
I
H
A4
A3
JL
totem
99 30
A4
A4
JR
6
assembly instructions
bdiusa.com customerservice@bdiusa.com
Page 7
Step 12
Position Universal Speaker Bracket (K) on back of speaker
and attach using appropriate mounting screws and washers
provided in Soundbar Speaker Kit (C).
NOTE: Some speakers are not equipped with
inserts to be attached to the Universal Speaker
Bracket (K) and require the purchase of an
additional bracket supplied by the speaker
manufacturer.
Attaching to Manufacturer’s Bracket
C Hardware
Speaker
Manufacturer’s
Speaker Bracket
K
Speaker
Step 13
Loosely pre-install Screw (A9) into Universal Speaker Bracket
(K). Locate bodies of Screw (A9) into groove of Speaker
Bracket Arms (J) and tighten into place using 5mm Allen
Wrench (A2).
Attaching Directly to Speaker
C Hardware
K
2 Person Task
NOTE: If the speaker position is either too close or
too far away from the bottom of the TV, reposition
Speaker Bracket Arms (J) to get desired spacing.
TV
A9
K
J
K
J
J
A9
totem
99 30
7
assembly instructions
bdiusa.com customerservice@bdiusa.com
Page 8
Step 14
Install Shelf Arms (LL, LR) to Pedestal using Screws (D2) and
4mm Allen Wrench (D3), provided in Shelf Assembly Kit (D).
NOTE: There are several shelf-height positions
to choose from on 2” increments to create
appropriate clearance of components.
LL
D2
D2
Step 15
Install Glass Shelf (M) to Shelf Arms (LL, LR) using Screws
(D1) and 5mm Allen Wrench (D4). Ensure the BDI Label on
Glass Shelf (M) is oriented toward the back of the unit shown
in Fig. 15-1.
LL
LR
D2
D2
2 Person Task
D1 D1
totem
99 30
M
D4
5mm Allen Wrench
D1 x 2
8
Fig. 15-1
assembly instructions
bdiusa.com customerservice@bdiusa.com
Page 9
Step 16
Wires can be passed under the wire management tray of the
Vertical Column (F). A power strip can be placed on the wire management tray of the Vertical Column (F).
F
F
Step 17
Install Lower Cover Panel (O) with the magnetic strip towards
the top.
O
totem
99 30
9
assembly instructions
bdiusa.com customerservice@bdiusa.com
Page 10
Step 18
Install Lower Cover Panel (N) by inserting tabs into the notches
of the wire management tray.
N
N
totem
99 30
10
assembly instructions
bdiusa.com customerservice@bdiusa.com
Loading...