I c o n
9423
a s s e m b l y i n s t r u c t i o n s
®
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
Component List
Arm x 1
Glass Top x 1
Back Panel x 1
Front Frame x 1
Glass Shelves x 2
Shelf Brackets x 2
Base x 1
A x 4
B x 3
C x 7
D x 1
E x 6
Your Icon® Home Theater Furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Placement and Maintenance
Icon® Home Theater Furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some components
are shipped inside the cabinet. The assembly workspace should be a nonmarring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at customerservice@bdiusa.com. For all
other concerns, please contact your BDI Retailer.
Step 2
Install Arms
Bracket mounting holes should face inward.
F x 6
G x 1
H x 1
I x 1
K x 5
L x 5
D x 2
G
Step 3
Install Levelers and Frame to Base
Install Levelers (F) to bottom of Base. Adjust Levelers (F) so Base is level
and stable. Place Washer (G) onto Base. Use twisting motion and make
sure frame is completely
seated on Base. There
should be 1/16” gap
between Wood Base and
Steel Frame.
Designed by Cristian Wicha & Bill Becker.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws. “Icon” and BDI are trademarks of
Becker Designed, Inc. All Rights reserved. ©2010, BDI
Made in Taiwan. 9423REV03112010v2
G x 1
F x 6
1
Step 4
Install the Shelf Brackets
Shelf Brackets can be adjusted to offer three different shelf positions.
Shelf Brackets x 2
E
E
1/16"
GAP
Step 5
Install Back Panel and Wire Managements Straps
Back Panel is to be installed with small holes facing backward.
Velcro straps are supplied to control cables. They can be screwed into
the steel at top and bottom of the arm or into the small holes on the
Back Panel.
E x 2
I
K
L
2
a s s e m b l y i n s t r u c t i o n s
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
Step 6
Install Glass Shelves
Use appropriate hardware. Apply Felt Washers to the stainless
pucks prior to glass installation.
PLEASE READ: Leave glass screws loose until all screws have been
installed. Then tighten securely. It may be nexessary to lossen Shelf
Brackets to obtain proper fit. Once Glass Shelves and Top Glass
are fitted, PLEASE BE CERTAIN TO GO BACK AND TIGHTEN ALL
SCREWS.
Top Glass
A x 2
B x 1
C x 3
Shelf Glass
B x 2
C x 2
Bottom Shelf Glass
A x 2
C x 2
3
a s s e m b l y i n s t r u c t i o n s
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
i m p o r t a n t n o t i c e
®
I c o n
9423
Icon Model 9423 are engineered specifically for Flat Panel Plasma and LCD TVs. This
model should not be used with Rear Projection or Traditional CRT (tube) TVs. Consult BDI’s
website (www.bdiusa.com) or sales brochure for recommended TV sizes.
INCORRECT
Do not position a
Flat Panel TV such
that the screen on
the front side of the
steel frame.
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
INCORRECT
DO NOT USE
ICON 9423 for Rear
Projection TV or
traditional CRT (tube)
type TVs.
steel
frame
CORRECT
Position the Flat Panel
TV so that the screen
is positioned behind
the steel frame.
CENTER LINE
steel
frame
4
a s s e m b l y i n s t r u c t i o n s
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
Loading...