BDI 9324 User Manual

Legs x 2

www.bdiusa.com

[e-mail]

Shelf Frame/
Shelf Glass

B x 8

D x 4
E x 4

C x 4

Hardware list:

A x 16

J

Cielo is a trademark of Becker

Designed, Inc.

All rights reserved.

Patents pending

©2005 Becker Designed, Inc.

I x 2

H x 1

G x 4

Lower Steel Front Rail
x 1

Lower Steel Rear Rail
x 1

F x 18

x 7

K

Cielo 9324 & 9329

Your CIELO home theater furniture is engineered for easy assembly. Carefully follow this
procedure to prevent any damage. Assembly should be done on a clean non-marring surface. All
tools necessary are provided. CIELO is designed for indoor use on level surfaces. Clean glass
parts with glass cleaner, clean steel and wood parts with a moist cloth. For missing hardware
pieces, please contact BDI at [e-mail] For all other concerns please contact
your local BDI retailer.

Designed by: Cristian R. Wicha

Back Panel x 1

Component list:

Assembly Instructions

Back Panel Supports
x 4

Upper Steel frame
x 1

Side Panels
x 2

HIGH PERFORMANCE

FURNITURE FOR YOUR

HOME THEATER

Step 3

Install back panel.

Back panel is to be installed with the
elongated slots on the bottom and small
holes and label facing backward, do not
tighten screws and supports until all screws
have been started. Once all screws are
started, tighten ALL securely.
BDI label should be in one of the lower
corners.

G

x 4

x 7

Wire management
straps.

Velcro straps are supplied
to control cables. They
can be screwed into the
small holes on the back
panel.

J

K

A x 16

I

back panel

lower steel frame assembly

B x 8

leave loose until all are started

I

larger holes face
inward, smaller holes
face outward

Step 2

Build basic structure.

Note the orientation of upper/ lower
steel frames; the holes for back panel
supports must align.

Do not fully tighten back panel supports
until back panel is installed (Step 3). Then
tighten ALL fasteners securely.

C x 4

H

Step 1

Build lower frame.

Attach legs to front and rear
steel rails.
NOTE: The rear rail has holes
for attaching back panel
supports. Larger holes MUST
face inward for proper
alignment in Step 2.

lower steel front rail
x 1

lower steel rear rail x
1

back panel supports x 4

install but do not tighten

side panels x
2

upper steel frame

I

E x 4

legs x 2