BDI 8777, 8779 Instruction Manual
ELEMENTS™ 8777__CO__
3 DOOR CONSOLE
ELEMENTS™ 8779__CO__
4 DOOR CONSOLE
Product Registration
Registering your new BDI product allows us to send you important
customerservice@bdiusa.com
bdiusa.com
product updates, service information and helpful hints related to
your BDI products. Register today, and you will be entered to win
T1 Phillips Screwdriver x 1
free a BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
T2 Hex Wrench x 1
Your Elements Console is designed for indoor use on level floors.
Clean wood veneer and steel parts with a moist cloth.
H1 1/4-20 x 12 mm
Elements is engineered for easy assembly. Carefully follow this
Machine Screw x 8
procedure to prevent any damage. Do not use power tools for
assembly of this product.
H2 1/4-20 x 75 mm
Machine Screw x 8
Your Elements cabinet includes an air-purifier pouch containing chemical-free, non-toxic, activated carbon.
This pouch is designed to absorb and remove traces of odor which may remain as a result of the unique
manufacturing processes used to create Elements. While any such odor will naturally dissipate over a period
of time, the pouch is provided to accelerate the effect. Please feel free to utilize the pouch inside the cabinet
indefinitely or transfer it to any other area in the home where you wish to manage moisture and odors. If you
choose to use it elsewhere (shoe racks, closets, basements, etc.), please be aware that the pouch can be
“re-charged” by placing in direct sunlight for 1-2 hrs after 2-3 months of continuous usage.
Step 1
Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as
carpet. For missing hardware pieces, contact BDI Customer Service at: customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
Note: Door
pattern may
be different
A2 Sub-frame
Designed by BDI Studio.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Elements & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in China. 03.27.2017 V4
C5 Back Panels x 2
A1 Cabinet x 1
[quad (shown)
or triple wide]
C3 Middle Shelf x 1
C4 Side Shelf x 2
C2 Leg Frame x 2
Step 2 - Attach the 2 Leg frames C2 to Sub-frame A2 with 8 Screws H1 using Hex wrench T2.
Make sure the red arrow on the sub-frame faces the same direction as the direction of the leg frames.
C2
Red arrow
T2
H1
H1 Screw x 8
A2
Step 3 Quad - With help from another person, carefully position the cabinet A1 upside-down (as shown) or on
its back. Caution-do not remove blocking above the shelves. Attach the base to the cabinet with 8 Screws H2
using Hex Wrench T2. Do NOT fully tighten until all 8 screws are started.
H2 x 8
2 Person Task
T2
2
ELEMENTS 8777/8779__CO__
CONSOLE
customerservice@bdiusa.com
bdiusa.com
Loading...