Page 1
vertica
8559
home theater
assembly instructions
bdiusa.com customerservice@bdiusa.com
Component List
A - Phillips Screwdriver
x 1
B1 - Hex Wrench
x 1
B2 - Leveler Wrench
x 1
C - Cabinet x 1
D - Cam Bolt x 2
E - Cam Fitting x 2
F - Wood Dowel x 2
Vertica is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
J
Placement and Maintenance
Vertica is designed for indoor use on level floors.
Clean wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note
that some components are shipped inside the
TWO PERSON ASSEMBLY
cabinet. The assembly workspace should be a nonmarring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at customerservice@bdiusa.com. For all
other concerns, please contact your BDI Retailer.
G - Side Legs x 2
H - Base Stretcher
x 1
I - Center Leg x 1
J - 1/4-20 x 60 mm
Machine Screw
x 3
K - 1/4-20 x 100 mm
Machine Screw
x 6
L - Adjustable Shelf
x 2
M - Large Adjustable
Shelf x 1
Step 2
Install and tighten Cam Bolts (D) into Side Legs (G) using Phillips
Screwdriver (A). Insert Wood Dowels (F) into corresponding holes of
Side Legs (G).
G
F
D
D
G
F
G
D
F
N - Back Panel
x 2
Designed by Matthew Weatherly.
These distinctive product congurations are protected by US and international patents,
trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2014, BDI
Made in China. 8559REV012315v2
1
Page 2
Step 3
Carefully lay Cabinet (C) on its back. Attach Base Stretcher (H) to bottom
of Cabinet (C) using Screw (J). Only hand tighten screws at this point.
C
J
H
J
J
J x 3
TWO PERSON ASSEMBLY
Step 4
Align Cam Bolt (D) and Wood Dowel (F) of Side Legs (G) into their
respective holes in Base Stretcher (H).
G
H
H
D
G
F
vertica
85 59 ho me t he ate r
G
2
assembly instructions
bdiusa.com customerservice@bdiusa.com
Page 3
Step 5
Insert Cam Fittings (E) into holes of Base Stretcher (H) with the arrow of the
Cam Fitting (E) pointing outward on each end of the Stretcher. Tighten each Cam
Fitting (E) clockwise using Phillips Screwdriver (A) until it no longer rotates.
E
HA
E
H
A
E
H
E
Step 6
Using Hex Wrench (B1) attach Side Legs (G) and Center Leg (I) with
Screws (K). Fully tighten Base Stretcher (H) screws that were left loose in
Step 3 using Hex Wrench (B1).
K
K
G
A
B1
K x 6
vertica
85 59 ho me t he ate r
K
K
I
K
K
3
assembly instructions
bdiusa.com customerservice@bdiusa.com
G
Page 4
Step 7
Position Cabinet right side up and install Back Panel (N) to the backside of
the Cabinet (C) by inserting top edge in upper channel then tipping bottom
edge forward and into lower channel.
C
2
N
1
Adjustable Shelves
The shelf pins located inside all three cabinet spaces may be repositioned using
Phillips Screwdriver (A), allowing you to raise or lower both Adjustable Shelf
(L) and Large Adjustable Shelf (M) to the desired level.
Optional Flat Panel TV Mount
This BDI cabinet is compatible with BDI’s Arena Flat-Panel TV
Mount #9970 and #9972 (sold separately), with the following features:
M
L
A
vertica
85 59 ho me t he ate r
• accommodates most TVs up to 65", 175 lbs
• swivel allows rotating for optimal viewing
• allows adjustable TV mounting height
• accepts and routes cables to and from the TV
For more information, visit www.bdiusa.com
4
assembly instructions
bdiusa.com customerservice@bdiusa.com
Loading...