Page 1
ERAS
ASSEMBLY INSTRUCTIONS
8354 8357 8358
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Placement and Maintenance
ERAS cabinets are designed for indoor use on level floors. Clean glass with glass cleaner, and wood veneer with a moist cloth.
Eras 8354 Cabinet
Eras 8358 Cabinet
Eras 8357 Cabinet
Component List
ERAS cabinets are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com.
For all other concerns, please contact your BDI Retailer.
A - 4mm Hex Driver x 1
For Screws
B - 5mm Hex Wrench x 1
For Cam and Bolt
C1
Designed by: Noah Packard
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2012 BDI
8354 8357 8358 Revision: 07-02-12
C2
C1 - Cam and C2 - Cam Bolt x 4
D - 8 x 40mm Dowels x 4
E - 1/4-20 x 38mm Screws
8357,8358 x 6
G - 1/4-20 x 63mm Screws
8357, 8358 x 10
8354 x 8
H - M4 x 25mm Screws
8354, 8358 x 4
8357 x 6
I - Handles
8354, 8358 x 2
8357 x 3
J - Cabinet x 1
K - Long Base Rails x 2
L - Short Base Rails x 2
M - Steel Supports x 2 (none for 8354)
N - Adjustable Shelves x 2
O - Removable Back Panels x 2
1
A2 - Phillips
Screwdriver x 1
I
O
J
N
N
L
K
M
O
K
M
L
Page 2
Step 1
Assemble Base
Insert Cams (C1) into Short Base Rails (L) with the
hole opening facing the
Dowels (D) into Long Base Rails (K). Insert
Insert
threads of
Rails (K)
Cam Bolt (C2) into inserts in Long Base
.
Long Base Rail (K).
C1
Threads
C2
L
L
K
L
K
D
K
Step 2
Tighten Cams in Base
Tighten Cams (C1) in Short Base Rails (L)
Phillips Screwdriver (A2).
using
L
A2
L
K
K
ERAS
8354 8357 8358
K
L
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
2
Page 3
Step 3
Attach Base to Cabinet Bottom
Place assembled base onto cabinet bottom.
Screws (G) into Short Base Rails (L)
Insert
and tighten using
A
G
4mm Hex Driver (A).
L
L
Step 4
Attach Steel Supports to Cabinet
Install Screws (E and G) into Steel Supports (M)
and tighten using
After all screws are tightened, turn cabinet over
right side up.
M
4mm Hex Driver (A).
G
E
A
ERAS
8354 8357 8358
Recommended
2-person Step
To turn Cabinet over
3
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Page 4
Step 5
Attach Handles
Attach Handles (I) to Doors using Screws (H)
and tighten with Phillips Screwdriver (A2).
I
H
H
Step 6
Install Shelves and Back Panels
Install Shelves (N) at desired location using
Shelf Pins.
Back Panels (O) by inserting top edge
Install
into upper slot, then tilt bottom of panel in
and lower panel into bottom slot.
O
To Adjust Doors
Loosen screws on hinge plate
to adjust door up or down.
A2
Turn screw to adjust door in or out from cabinet.
Turn screw to adjust door tilt.
ERAS
8354 8357 8358
N
ASSEMBLY INSTRUCTIONS
4
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Loading...