NORA
8239 AND 8239-S
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Component List
A - Phillips Screwdriver
x 1
B - 4mm Hex Wrench
x 1
C - Dowel Pin x 2
D - 1/4-20 x 1.75"
Machine Screw x 2
E - Center Leg x 1
F - Leg Assembly
x 2
G - Rail x 1
H - 1/4-20 x 3.25"
Machine Screw x 10
Nora is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.
NOTE: This instruction sheet is intended for the entire Nora
collection; model 8239 is shown for illustration.
Placement and Maintenance
Nora is designed for indoor use on level floors. Clean glass with
glass cleaner; steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some
components are shipped inside the cabinet. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at customerservice@bdiusa.com. For all other concerns, please
contact your BDI Retailer.
Step 2
Remove Pre-Installed Adjustable Shelves (J)
I - Assembled Cabinet
x 1
J - Adjustable Shelf
x 2
K - Back Panel x 2
J
Designed by Al Glass and Matthew Weatherly.
;OLZLKPZ[PUJ[P]LWYVK\J[JVUÄN\YH[PVUZHYLWYV[LJ[LKI`<:HUK
international patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2011, BDI
Made in China. F :9,=3102412v3
1
Step 3
Build Base Assembly
Press Dowel Pins (C) into place to install Center Leg (E) to Rail (G). Then
join Rail (G) and Leg Assemblies (F) together, aligning holes for 1/4-20 x
1.75" Machine Screw (D)
D
F
.
C
E
Step 4
Install Base Assembly
With Assembled Cabinet (I) resting safely on its top surface, install built
Base Assembly to Cabinet bottom using 1/4-20 x 3" Machine Screw (H)
and tighten with Hex Wrench (B).
D
F
NOTE: The holes
are facing up in this
assembly.
H
H
H
H
H
H
H
H
H
H
I
NORA
8239 AND 8239-S
2
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Loading...