BDI 6907 Instructions

SIGMATM 6907

MOBILE FILE

bdiusa.com

[e-mail]

Product Registration

Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/

Placement and Maintenance

Sigma™ Office furniture is designed for indoor use on level floors. Clean
glass with glass cleaner, and other surfaces with a damp cloth.

Your Sigma™ Office furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI retailer.

Hardware List:

H1 Phillips M4

Screw x 20

C4 Small File Bar x 1

C6 File Bar Clip x 2

Designed by BDI Studio.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Sigma & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI
Made in Turkey. 02.18.2019 V2

A1 Cabinet

C8 Locking Swivel

Caster x 5

Required tools:

Phillips screwdriver

Step 2 - Lay Cabinet on its back side. Attach Casters to Cabinet using Screws H1 and tighten with a
Phillips screwdriver. With help from another person, stand the cabinet onto its feet. Casters can be locked

and unlocked by pressing or lifting the lever.

2 Person Ta sk

C8 x 5

H1 x 20

Step 3 - For forward facing letter sized files simply place your hanging folders on the 2 side rails.

For sideways facing letter files, proceed to step 3B.

lower drawer

2

SIGMA 6907
MOBILE FILE

[e-mail]

bdiusa.com