BDI 6657 Assembly Instructions

STANCE® 6657
MODESTY PANEL
bdiusa.com
customerservice@bdiusa.com
Product Registration
Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Stance® Lift Desk is designed for indoor use on level floors. Clean wood veneer with a damp cloth.
Your Stance® Office furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. For all other concerns, please contact your BDI retailer.
Hardware List:
H1 Wood Screw x 8
H2 M6 x 12 Screw x 2
Designed by BDI Studio These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Stance & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI Made in Turkey. 06.20.2019
Brackets x 2
Modesty Panel x 1
Tool Required:
Phillips screwdriver
Step 1 - Install the brackets Attach the 2 metal brackets to the modesty panel as shown with the 8 wood screws provided going into the 8 pilot holes located towards the top, inside edge of the panel. Tighten with a Phillips screwdriver.
DO NOT use a power drill. DO NOT over tighten the screws, otherwise they will strip.
Phillips screwdriver
H1 Wood Screw x 8
2
STANCE 6657 MODESTY PANEL
customerservice@bdiusa.com
bdiusa.com
Loading...
+ 1 hidden pages