BDI 6521 Installation Guide
CORRIDOR® 6521
EXECUTIVE DESK
bdiusa.com
customerservice@bdiusa.com
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to
your BDI products. Register today and you will be entered to win
free a BINK table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Corridor® Office furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer
with a moist cloth.
Your Corridor® Office furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at customerservice@bdiusa.com. For all other concerns, please
contact your BDI retailer.
C11 Wire Management Lid
C1 Glass Panel
T1 4mm Hex Wrench
H1 1/4-20 x 12mm
Screw x 3
H5 1/4-20 x 32mm
Screw x 6
H7 Barrel Nut x 4
H8 1/4-20 x 15mm
Screw x 4
H9 1/4-20 x 58mm
Screw x 6
H10 1/4-20 x 87mm
Screw x 2
H11 Bumper x 5
H12 10-32 x 37mm
Screw x 4
H13 Leveler x 4
C10 Modesty Panel
C12 Removable
A4 Wire Management
Trough
A1 Drawer
Assembly
C12 Removable
side panel x 2
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in China. 12.08.2015 V2
A2 Left Leg
side panel x 2
A3 Right Leg
Tool Required:
Phillips screwdriver
C13 Center Drawer
Liner x 1
C14 Side Drawer
Liner x 2
Step 2 - Install Base
Aligning the Colored Dots on the same side, attach Wire Management Trough A4 to Modesty Panel C8
using Screw H1 and Hex Wrench. Keep screws loose until Step 7.
A4
Colored Dots
C10
H1 (x3)
A4
C10
Step 3 - Match Colored Dot on Right Leg A3 with Colored Dot on Modesty Panel Assembly and attach
using Screws H5 and Hex Wrench T1. Keep screws loose until Step 5. Repeat to attach Left Leg A2 to
Modesty Panel Assembly. Install Glides H13 to the bottom of Legs A2 & A3. With the help of another person,
turn desk upright onto its base.
A3
A2
H13 (x4)
Colored Dot
H5 (x6)
2
CORRIDOR 6521
EXECUTIVE DESK
H5
bdiusa.com
customerservice@bdiusa.com
Loading...