CORRIDORTM 6529
CREDENZA
bdiusa.com
customerservice@bdiusa.com
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Corridor® Office furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.
Your Corridor® Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI retailer.
T1 4mm Hex Wrench
H1 1/4-20 x 12mm
Machine Screw x 16
H2 M4 x 37mm Machine
Screw x 8
H3 1/4-20 x 63mm
Machine Screw x 6
H4 Bumper x 6
C2 Pull x 4
C4 Small File Bar x 2
C1 Glass Panel x 1
A1 Cabinet x 1
C7 Base Stretcher x 2
C8 Left Leg x 1
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in China. 02.05.2016 V2
C3 Right Leg x 1
C5 Large File Bar x 1
C6 File Bar Clip x 4
Tool Required:
Phillips screwdriver
Step 2 - Build Base Assembly
Slide Left Leg C8 and Right Leg C3 into Base Stretcher C7 and attach by using Hex Wrench and Screw
H1.
C8
C7
C3
Æ
C7
Æ
H1 (x8)
Step 3 - Attach Leg Assembly to Cabinet using Screws H1 and H3 and tighten with Hex Wrench.
Æ
Æ
H1
2
CORRIDOR 6529
CREDENZA
H3
H3 (x6)
H1 (x8)
bdiusa.com
customerservice@bdiusa.com
Loading...