BDI 6417 Assembly Instructions

CENTROTM 6417

MULTIFUNCTION CABINET

bdiusa.com

[e-mail]

Product Registration

Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/

Placement and Maintenance

Centro™ Office furniture is designed for indoor use on level floors. Clean
glass with glass cleaner, and steel parts and wood veneer with a moist
cloth.

Your Centro™ Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI retailer.

T1 4mm Hex Wrench

H1 1/4-20 x 15mm

Screw x 16

H2 M4 x 37mm
Screw x 6

H3 1/4-20 x 19mm
Screw x 3

H4 Bumper x 2

C2 Pull x 3

C4 Small File Bar x 2

C1 Glass Panel x 1

A1 Cabinet x 1

C3 Base x 2

Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Centro & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in China. 02.16.2016 V2

C5 Large File Bar x 1

C6 File Bar Clip x 4

Tool Required:

Phillips screwdriver

Step 2 - Install Base
Attach Base to Cabinet using Screws H1 and tighten with Hex Wrench.

H1 (x16)

Step 3 - Adhere Bumpers H4 as shown.
Step 4 - From below the top panel, attach Glass Panel with Screws H3 using Hex Wrench.

H4 (x2)

H3 (x3)

2

CENTRO 6417
MULTIFUNCTION CABINET

[e-mail]

bdiusa.com