Page 1
FORMAT
ASSEMBLY INSTRUCTIONS
Component List
6320
A - Phillips Screwdriver
x 1 (not provided)
B - Cabinet x 1
C - 5/32" x 12mm
Phillips Screw
x 24
D - Brake Caster x 5
E - Center Caster x 1
F - M4 x 37mm
Phillips Screw
x 4
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Format is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.
Do not use power tools for assembly of this product.
Placement and Maintenance
Format™ Office furniture is designed for indoor use on level floors.
Clean steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some
components are shipped inside the cabinet. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at customerservice@bdiusa.com. For all other concerns, please
contact your BDI Retailer.
Step 2
Install Casters
Carefully position Cabinet (B) on its back side so that bottom side
is accessible, then attach a Caster at each of the six (6) exposed
installation plates using 5/32" x 12mm Phillips Screw (C) and a
Phillips Screwdriver. Then carefully turn Cabinet (B) upright.
2 Person Task
G - M4 x 25mm
Phillips Screw
x 4
H - Pull x 4
I - Legal File Bar x 2
J - Lateral File Bar x 1
K - Shelf Pin x 8
L - Adjustable
Printer Shelf x 1
E x 1
C x 4
D x 5
M - Adjustable
Cabinet Shelf x 1
C x 20
Designed by Matthew Weatherly.
These distinctive product confi gurations are protected by US and
international patents, trade dress, and/or copyright laws.
BDI and Format are trademarks of Becker Designed, Inc.
All Rights reserved. ©2012, BDI
Made in Taiwan. 6320REV022312v1
1
Page 2
Step 3
Install Pulls.
Install Pull (H) to drawers using the M4 x 37mm Phillips Screw (F) and a
Phillips Screwdriver. Install Pull (H) to door and file drawer using the M4 x
25mm Phillips Screw (G) and a Phillips Screwdriver.
H x 2
H x 2
F x 4
G x 4
G x 4
Step 4
Install Shelves.
Install Shelf Pins (K) at desired height to install Adjustable Shelves (L) and
(M). *Note: To place the adjustable shelf inside the cabinet, the shelf may
be tilted sideways to clear the door opening.
H x 2
FORMAT
6320
2
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Page 3
Step 5
Optional - Install File Bars
Legal File Folders can be installed in the lateral drawers left-to-right without
installing File Bars.
Letter File Folders can be installed in the lateral drawer left-to-right by
lowering Lateral File Bar (J) onto drawer sides.
If users wish to install File Folders front-to-back, place Legal File Bars (I)
onto drawer rails front and back.
FORMAT
6320
3
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Loading...