BDI 6307 User Manual

FORMAT
ASSEMBLY INSTRUCTIONS
Component List
6307
A - Phillips Screwdriver x 1 (not provided)
B - Cabinet x 1
C - 5/32" x 12mm
Phillips Screw x 20
D - Brake Caster x 4
E - Center Caster x 1
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Format is engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Placement and Maintenance
Format™ Office furniture is designed for indoor use on level floors. Clean steel parts and wood veneer with a moist cloth.
Step 1 Unpack and Identify
Unpack and identify the components at left. Note that some components are shipped inside the cabinet. The assembly workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. For all other concerns, please contact your BDI Retailer.
Step 2 Install Casters
Carefully position Cabinet (B) on its back side so that bottom side is accessible, then attach a Caster at each of the five (5) exposed installation plates using 5/32" x 12mm Phillips Screw (C) and a Phillips Screwdriver.
D x 4
C x 16
H - Pull x 2
E x 1
I - Letter File Bar x 2
C x 4
Designed by Matthew Weatherly. These distinctive product confi gurations are protected by US and international patents, trade dress, and/or copyright laws. BDI and Format are trademarks of Becker Designed, Inc. All Rights reserved. ©2012, BDI Made in Taiwan. 6307REV022312v1
1
Step 3 Install Drawer Pulls. Install Pulls.
Carefully turn pedestal upright and then install Pull (H) to top drawer using the M4 x 37mm Phillips Screw (F) and a Phillips Screwdriver. Install Pull (H) to bottom drawer using the M4 x 25mm Phillips Screw (G) and a Phillips Screwdriver.
F x 2
H x 1
Step 4 File Folders
Users who wish to use legal-length files may install Letter File Bars(I) into place near front and back of file drawers.
H x 1
G x 2
I
FORMAT
6307
2
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Loading...