BDI 6114 Instruction Manual

SEQUEL® 20 6114

3-DRAWER FILE PEDESTAL

INSTRUCTION MANUAL

LET’S GET STARTED.

DESIGN MATTHEW WEATHERLY

Congratulations on the purchase of your Sequel 20 3 Drawer File Pedestal 6114 from BDI.

Your file pedestal has been designed to provide a lifetime of enjoyment. This manual will

provide you with assembly instructions and other helpful information that will ensure

that you get the most out of your file pedestal. Please save it for future reference.

Your Sequel 20 File Pedestal has been engineered for simple assembly. Please follow

these directions carefully to prevent any damage.

Should you need further assistance, contact BDI at [e-mail].

ENJOY!

BDIUSA.COM | 3NEED ASSISTANCE? [e-mail]

HARDWARE AND COMPONENTS

HARDWARE AND COMPONENTS

Unpack and identify the parts listed below. The assembly workspace should be a non-marring
surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at
[e-mail].

Do not use power tools for assembly of this product.

For all other concerns, please contact your BDI retailer.

PART #

DESCRIPTION

QUANTITY

PART #

DESCRIPTION

QUANTITY

T1

Hex Wrench

1

H2

M4 x 35mm Screw

6

PART #

DESCRIPTION

QUANTITY

PART #

DESCRIPTION

QUANTITY

T2

Leveler Wrench

1

H4

Small File Bar

1

PART #

DESCRIPTION

QUANTITY

PART #

DESCRIPTION

QUANTITY

H1

M6 x 15mm Screw

16

H5

File Bar Clip

2

4 | BDIUSA.COM SEQUEL 20 6114

HARDWARE AND COMPONENTS

PART #

DESCRIPTION

QUANTITY

PART #

DESCRIPTION

QUANTITY

C2

Leg

2

C1

Cabinet

1

PART #

DESCRIPTION

QUANTITY

C3

Drawer Pull

3

PART #

DESCRIPTION

QUANTITY

C4

Glass Top

1

TOOL REQUIRED (NOT INCLUDED)

Phillips Screwdriver

BDIUSA.COM | 5NEED ASSISTANCE? [e-mail]

STEP 1. ATTACH THE LEGSASSEMBLY

Carefully position (C1) Cabinet onto its back. Install
(C2) Legs using (H1) Screws and (T1) Hex Wrench.

C1

H1

PART/DESCRIPTION QTY

T1-HEX WRENCH 1

H1-SCREW 16

C2

C2

H1

H1

C2

H1

H1

6 | BDIUSA.COM SEQUEL 20 6114

STEP 2. ATTACH DRAWER PULLS

ASSEMBLY

Open a drawer and connect a (C3) Drawer Pull
using 2 (H2) Screws. Tighten with a Phillips

Screwdriver (not included). Install the other
2 (C3) Drawer Pulls one at a time.

C3

C3

PART/DESCRIPTION QTY

H2-Screw 6

NOT INCLUDED

Phillips Screwdriver

1

H2

C3

BDIUSA.COM | 7NEED ASSISTANCE? [e-mail]

STEP 3. PLACE GLASS TOPASSEMBLY

Place (C4) Glass Top into position on top of the cabinet. Align
all edges. The glass edge should be oset 1.5mm from the
side of the cabinet on all four sides.

1.5 mm

C4

C1

FINE TUNING

If needed, dial out 1 or more levelers using the
(T2) Leveler Wrench attain a level stance.

LEVEL CABINET

PART/DESCRIPTION QTY

T2-Leveler Wrench 1

T2

down

8 | BDIUSA.COM SEQUEL 20 6114

ARRANGING YOUR FILES

FINE TUNING

Letter sized file folders fit side-to-side as shown.
Legal sized file folders fit front-to-back.

For Letter or A4 files facing front-to-back, attach
(H5) File Bar Clip to both ends of (H4) Small File
Bar as shown. Place the file bar assembly in the

notches located on the left and right drawer side
panels. For A4, slide the file bar backwards within
the notch.

PART/DESCRIPTION QTY

H4-SMALL FILE BAR 1

H5-FILE BAR CLIP 2

H4

H5

Letter

side-to-side

H5

H4

H5

Legal

front-to-back

H4

H5

Letter/A4

front-to-back

H5

Letter/A4 notch

BDIUSA.COM | 9NEED ASSISTANCE? [e-mail]

CARE & MAINTENANCE

GLASS

Glass surface is maintained using household glass cleaner and a paper towel or cloth.

SATIN-ETCHED GLASS

This uniquely smooth-to-the-touch glass surface can be regularly maintained using household glass
cleaner and a paper towel or cloth. Minor scratches or scuffs not eliminated using paper towel or cloth
can usually be removed by using a ‘Magic Eraser’. Magic Eraser is a melamine foam product available
at any grocery store or home improvement center. Dampen the entire glass surface as well as the
Magic Eraser, then rub the entire glass surface in broad, even strokes using moderate pressure. Clean
and dry the surface with a paper towel. Check for results and repeat as necessary.

Any scratches or scuffing not eliminated by one of the above methods can often be addressed by
‘refreshing’ the glass. This is a process that should not be required more than once per 6-12 months.
See this brief video for the simple method: www.bdiusa.com/glass

WOOD

Wood surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. Do not
use glass cleaner on wood. If moisture remains, dry the surface with another cloth. If needed, a gentle
non-abrasive cleanser may be used, but be sure to wipe away all cleaner residue and dry the surface
with a cloth.

BDI’s wood finishes feature natural hardwood solids and veneers. Wood is a product of nature and—
unlike man-made materials that can be manufactured to strict and consistent specifications—has
natural imperfections that are part of its appeal and character. Every piece of wood differs from every
other, even when coming from the very same tree. As such, variation in grain, texture and tone should
be expected from one panel or piece of furniture to the next.

While BDI’s stained wood finishes are stable in tone & appearance, all finishes are subject to some
degree of discoloration with prolonged exposure to direct sunlight. Please take care to avoid
positioning your BDI cabinet in any area with extensive direct sunlight. To learn more about the
features of natural wood, visit www.bdiusa.com/wood

METAL & PAINTED SURFACES

Surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. If moisture
remains, dry the surface with another cloth. If needed, a gentle non-abrasive cleanser may be used,
but be sure to wipe away all cleaner residue and dry the surface with a cloth.

10 | BDIUSA.COM SEQUEL 20 6114

WARRANTY

BDI warrants to the original purchaser that for the below stated warranty term, BDI will repair or
replace any product, part, or component covered by this warranty which fails under normal use as a
result of a defect in material or workmanship. BDI will repair or replace the aforementioned product,
part or component with a comparable product, part or component. The decision to repair or replace
will be at BDI’s sole discretion.

BDI Home Theater Furniture, Office Furniture, Modular Systems, Tables and other furniture pieces
are warranted for three (3) years from the date of purchase as shown on your sales receipt. The
warranty period starts from the date of purchase. This warranty extends only to the original
purchasers who acquire new product from BDI Authorized Resellers. Any product, part, or
component must have been assembled, installed, used, and maintained according to BDI’s published
instructions in order to be eligible for warranty coverage. Any modification to the original product
voids the warranty.

To view BDI’s complete warranty information, visit www.bdiusa.com/warranty

PRODUCT REGISTRATION

Registering your new BDI product allows us to send you important product updates, service
information and helpful hints related to your BDI products. Register today, and you will be entered
to win free a BINK table from BDI: www.bdiusa.com/register

WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM FURNITURE TIP-OVER. TO HELP
PREVENT TIP-OVER:

nInstall tip-over restraint.
n Place heaviest items in lower compartments.
nNever allow children to climb or hang on drawers, doors or shelves.
nNever open more than one drawer at a time.

USE OF TIP-OVER RESTRAINT MAY REDUCE—BUT NOT ELIMINATE—THE RISK OF TIP-OVER.

BDIUSA.COM | 11NEED ASSISTANCE? [e-mail]

These distinctive product configurations are protected by US and international patents, trade
dress, and/or copyright laws. Sequel & BDI are trademarks of Becker Designed, Inc. All rights
reserved. ©2020, BDI | V.05.15.2020

Made in Vietnam.