Page 1
A - 4mm Hex L-Wrench
x 1
B - 1/4-20 x 18mm
Machine Screw x 16
Black Color
C - 1/4-20 x 22mm
Machine Screw x 3
Chrome Color
D - Rubber Stem Bumper
x 2
H - Large File Folder
Brackets
6016 x 2
6017 x 1
I - Small File Folder
Brackets
6016 x 4
6017 x 2
G - Handles
6015 x 3
6016 x 2
6017 x 3
E - M4 x 25mm
Machine Screw
6015 x 4
F - M4 x 37mm
Machine Screw
6015 x 2
6016 x 4
6017 x 6
M - Shelf Pins
6015 x 8
6017 x 4
SEQUEL
LATERAL FILE
CABINET
Designed by Matthew Weatherly
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2010 BDI
Made in Taiwan. 6015 6016 6017 Revision: 09-14-10
Component List
6015 6016 6017
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
SEQUEL LATERAL FILE CABINETS are engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Placement and Maintenance
SEQUEL LATERAL FILE CABINETS are designed for indoor use on level floors.
Clean glass with glass cleaner, and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components. The assembly workspace should be a
non-marring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at customerservice@bdiusa.com. For all other
concerns, please contact your BDI Retailer.
6015
6016
6017
J
J -
Glass Top x 1
K - Cabinet x 1
L - Base Legs x 2
K
L
L
Page 2
SEQUEL LATERAL FILE CABINET
6015 6016 6017
ASSEMBLY INSTRUCTIONS
2
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Step 2
Attach Base Legs
Attach Base Legs (L) to bottom of
Cabinet (K) with Machine Screws (B)
Black Color Screws and tighten with
4mm Hex L-Wrench (A).
Adjust Levelers as necessary.
Step 3
Attach Glass Top
Install Rubber Stem Bumpers (D) into
holes in rear of top of
Cabinet (K).
Open top drawer halfway to access
screws to attach glass. Lower
Glass
Top (J)
onto Cabinet (K) with 2 glass
fittings towards the front. Attach
Glass
Top (J)
with 3 Machine Screws (C)
Chrome Color Screws and tighten with
4mm Hex L-Wrench (A).
DO NOT OVER-TIGHTEN.
Glass Top (J)
Front Edge
Glass Fittings
Glass Top (J)
Front Edge
4mm Hex L-Wrench (A)
Machine Screws (B)
Black Color Screws
Base Leg (L)
Base Leg (L)
Machine Screws (B)
Black Color Screws
Bottom View
Rubber Stem
Bumpers (D)
D
Glass Fittings
on bottom
Page 3
SEQUEL LATERAL FILE CABINET
6015 6016 6017
ASSEMBLY INSTRUCTIONS
3 BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Step 4
Attach Handles
Attach Handles (G) to Drawers with
Machine Screws (F) and tighten with
Phillips Screwdriver.
Attach
Handles (G) to Doors on 6015
with
Machine Screws (E) and tighten
with Phillips Screwdriver.
Step 5
Optional - Install File Folder Brackets
Legal File Folders can be installed in the lateral
drawers front to back without installing File Folder
Brackets. If users wish to install Letter or A4 File
Folders Front to Back, install
Large File Folder
Bracket (H)
by lowering bracket onto drawer sides
(see Fig. 5.1).
If users wish to install File Folders side to side, install
Small File Folder Brackets (I) by lower brackets
onto drawer front and back (see Fig. 5.2)
F
F
G
Fig. 5.1
Fig. 5.2
I
H
I
Page 4
SEQUEL LATERAL FILE CABINET
6015 6016 6017
ASSEMBLY INSTRUCTIONS
4
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
All 6016 SEQUEL LATERAL FILE CABINETS are pre-assembled with matching locks. If you require unique locks for your
home or office use, please contact BDI Customer Service at customerservice@bdiusa.com to purchase a unique lock and
key replacement kit which includes a numbered lock core, two keys and a core removal key. There is a number on the
face of each lock core and a matching number on the key. To replace the lock please follow the instructions below.
Insert core removal key
and turn 1/4 turn clockwise
to release lock core.
4. Pull lock core straight out from cylinder body.
5. Insert new lock core into cylinder body until the
lock core snaps into place.
Optional - Lock Removal and Installation
1. Using normal key, turn lock fully clockwise.
2. Remove normal key and insert core removal key into the lock.
3. Rotate core removal key clockwise 1/4 turn.
Lock Core No.
Matching Key No.
Core Removal Key
(without Key No.)
Loading...