Page 1
SEQUEL
LATERAL FILE
CABINET
6015 6016 6017
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Component List
A - 4mm Hex L-Wrench
x 1
B - 1/4-20 x 18mm
Machine Screw x 16
Black Color
C - 1/4-20 x 22mm
Machine Screw x 3
Chrome Color
D - Rubber Stem Bumper
x 2
E - M4 x 25mm
Machine Screw
6015 x 4
F - M4 x 37mm
Machine Screw
6015 x 2
6016 x 4
6017 x 6
SEQUEL LATERAL FILE CABINETS are engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Placement and Maintenance
SEQUEL LATERAL FILE CABINETS are designed for indoor use on level floors.
Clean glass with glass cleaner, and wood veneer with a moist cloth.
6015
6016
G - Handles
6015 x 3
6016 x 2
6017 x 3
H - Large File Folder
Brackets
6016 x 2
6017 x 1
I - Small File Folder
Brackets
6016 x 4
6017 x 2
J -
Glass Top x 1
K - Cabinet x 1
L - Base Legs x 2
M - Shelf Pins
6015 x 8
6017 x 4
6017
Step 1
Unpack and Identify
Unpack and identify the components. The assembly workspace should be a
non-marring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at customerservice@bdiusa.com. For all other
concerns, please contact your BDI Retailer.
J
K
L
Designed by Matthew Weatherly
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2010 BDI
Made in Taiwan. 6015 6016 6017 Revision: 09-14-10
1
L
Page 2
Step 2
Attach Base Legs
Attach Base Legs (L) to bottom of
Cabinet (K) with Machine Screws (B)
Black Color Screws and tighten with
4mm Hex L-Wrench (A).
Adjust Levelers as necessary.
Machine Screws (B)
Black Color Screws
4mm Hex L-Wrench (A)
Base Leg (L)
Machine Screws (B)
Base Leg (L)
Black Color Screws
Step 3
Attach Glass Top
Install Rubber Stem Bumpers (D) into
holes in rear of top of
Open top drawer halfway to access
screws to attach glass. Lower
Top (J)
fittings towards the front. Attach
Top (J)
Chrome Color Screws and tighten with
4mm Hex L-Wrench (A).
DO NOT OVER-TIGHTEN.
onto Cabinet (K) with 2 glass
with 3 Machine Screws (C)
Glass Top (J)
Front Edge
Glass Fittings
Cabinet (K).
Glass
Glass
Glass Fittings
on bottom
Glass Top (J)
Front Edge
Rubber Stem
Bumpers (D)
D
Bottom View
SEQUEL LATERAL FILE CABINET
6015 6016 6017
2
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Page 3
Step 4
Attach Handles
Attach Handles (G) to Drawers with
Machine Screws (F) and tighten with
Phillips Screwdriver.
Attach
with
with Phillips Screwdriver.
Handles (G) to Doors on 6015
Machine Screws (E) and tighten
F
F
G
Step 5
Optional - Install File Folder Brackets
Legal File Folders can be installed in the lateral
drawers front to back without installing File Folder
Brackets. If users wish to install Letter or A4 File
Folders Front to Back, install
Bracket (H)
(see Fig. 5.1).
If users wish to install File Folders side to side, install
Small File Folder Brackets (I) by lower brackets
onto drawer front and back (see Fig. 5.2)
by lowering bracket onto drawer sides
Large File Folder
I
I
H
Fig. 5.1
SEQUEL LATERAL FILE CABINET
6015 6016 6017
Fig. 5.2
ASSEMBLY INSTRUCTIONS
3 BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Page 4
All 6016 SEQUEL LATERAL FILE CABINETS are pre-assembled with matching locks. If you require unique locks for your
home or office use, please contact BDI Customer Service at customerservice@bdiusa.com to purchase a unique lock and
key replacement kit which includes a numbered lock core, two keys and a core removal key. There is a number on the
face of each lock core and a matching number on the key. To replace the lock please follow the instructions below.
Optional - Lock Removal and Installation
1. Using normal key, turn lock fully clockwise.
2. Remove normal key and insert core removal key into the lock.
3. Rotate core removal key clockwise 1/4 turn.
Lock Core No.
Core Removal Key
(without Key No.)
Matching Key No.
Insert core removal key
and turn 1/4 turn clockwise
to release lock core.
4. Pull lock core straight out from cylinder body.
5. Insert new lock core into cylinder body until the
lock core snaps into place.
SEQUEL LATERAL FILE CABINET
6015 6016 6017
4
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Loading...