BDI 6007 User Manual

6001

6002

6

6006

6007

Se q u e l

S e q u e l

6007 Lo w f i L e c a b i n e t

a s s e m b L y i n s t r u c t i o n s

b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m

Component List

A - Cabinet x 1

B - 5/32” x 12mm

Phillips Screw x 20

C - Brake Caster x 2

D - Center Caster x 1

Your Sequel Home Office Furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.

Placement and Maintenance

Sequel Home Office Furniture is designed for indoor use on level floors.
Clean steel parts and wood veneer with a moist cloth.

Step 1
Unpack and Identify

Unpack and identify the components at left. Note that some components
are shipped inside the cabinet. The assembly workspace should be a non­marring surface such as carpet. A Phillips Screwdriver will be needed for
assembly. For missing hardware pieces, please contact BDI Customer
Service at [e-mail]. For all other concerns, please
contact your BDI Retailer.

Step 2
Install Casters

Carefully position Cabinet (A) on its top surface so that bottom surface is
up, then attach a Caster to each of the five (5) exposed installation plates
using 5/32” x 12mm Phillips Screw (B) and a Phillips Screwdriver.

E - Rear Caster x 2

F - 5/32” x 22mm

Phillips Screw x 6

G - Drawer Pull x 3

H - Legal File Folder

Stretchers x 2

FRONT

C x 2

B x 8

D x 1

B x 4

E x 2

Designed by Matthew Weatherly.

‘Sequel’ is a trademark of Becker Designed, Inc.
All rights reserved. ©2009 Becker Designed, Inc.
Made in Taiwan. 6007REV121509v2

B x 8

1

Step 3
Install Handles.

Carefully turn pedestal upright so that it rests evenly on all
installed casters, then install one Drawer Pull (G) per drawer
using the 5/32” x 22mm Phillips Screw (F) and a Phillips
Screwdriver.

F x 6

G x 3

File Folders

Users who wish to use legal-length files may install provided
Legal File Folder Stretchers (H) by dropping into place near
front and back of the file drawer.

2

a s s e m b L y i n s t r u c t i o n s

b d iu s a .c o m c u s t o m e r s e r v i c e @bd i u s a .c o m