1
Placement and Maintenance
Sequel™ Home Office Furniture is designed for indoor use on level floors. Clean glass
with glass cleaner, and steel parts and wood veneer with a moist cloth. Your Sequel™
Home Office Furniture is engineered for easy assembly. Carefully follow this procedure
to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace should be a
non-marring surface such as carpet. For missing hardware pieces, please contact BDI
Customer Service at customerservice@bdiusa.com. For all other concerns, please
contact your BDI Retailer.
Designed by Matthew Weatherly.
‘Sequel’ is a trademark of Becker Designed, Inc.
All rights reserved. ©2015 Becker Designed, Inc.
Made in Taiwan. 6002REV082515v7
G - 1/4-20 x 63 mm Screw x 6
H - 1/4-20 x 16 mm Screw x 16
F - 4mm Hex Wrench x 1
Component List
B - Top Glass x 1
D - Front Kick Panel x 1
C - Back Panel x 1
(optional)
L - Right Leg x 1
K - Left Leg x 1
M - Glides x 4
A - Frame Assembly x 1
E - Lower Horizontal Beam x 1
N - Upper Horizontal Beam x 1
sequel
®
6002
return
assembly instructions
bdiusa.com customerservice@bdiusa.com
assembly instructions
bdi
usa.com customerservice@bdiusa.com
2
sequel
®
60 02 RE TU RN
Step 1
Install Glides (M) to the bottom of Left Leg (K) and Right Leg (L).
M x 4
L
K
assembly instructions
bdi
usa.com customerservice@bdiusa.com
3
sequel
®
60 02 RE TU RN
L
A
H
H
Step 2
Attach Left Leg (K) to Frame Assembly (A) using Screw (H) and
Hex Wrench (F).
Step 3
Attach Right Leg (L) to Frame Assembly (A) using Screw
(H) and Hex Wrench (F).
K
A
Loading...