BDI 4961 User Manual

h a n g i n g i n s t r u c t i o n s
1"
69" (To Floor)
75" (To Floor)
8"
23" 23"
Jazz
4961
Placement and Maintenance
Jazz is designed for indoor use. Clean mirror with glass cleaner.
To hang your mirror at BDI’s suggested height carefully follow this procedure to prevent any damage. The measurements shown indicate nail locations on the wall for single or multiple configurations. Adjust hanging dimensions as need to hang at a different height.
Single Configuration
Determine the desired height for the mirror. At 6.25" below the desired top of the mirror make two marks with a pencil, 23" apart. Make sure your marks are level then install supplied hangers. Verify that hangers are level and hang mirror from brackets.
Multiple Configurations
Follow dimensions shown on drawing.
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
3"
Designed by Mark Palmquist ‘Jazz’ is a trademark of Becker Designed, Inc. All rights reserved. ©2011 Becker Designed, Inc. 4961 052411v3
Loading...