BDI 4932 User Manual

h a n g i n g i n s t r u c t i o n s

L i z a

4932

Your Liza Mirror can be hung vertically and horizontally. Carefully follow this procedure to prevent any damage.

Placement and Maintenance: Liza is designed for indoor use. Clean mirror with glass cleaner.
To hang your mirror at BDI’s suggested height:

• Vertical Hanging: At 66” high make two marks with a pencil, 12.5” apart. Make sure your marks are level then
install supplied hangers. Verify that hangers are level and hang mirror frame from brackets.

• Horizontal Hanging: At 68” high make two marks with a pencil, 26.5” apart. Make sure your marks are level then
install supplied hangers. Verify that hangers are level and hang mirror frame from brackets.

• The measurements shown indicate nail locations on the wall for single or multiple configurations.

12.5" 26.5"

22.25" 26.5"12.5"12.75"

b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m

66" (To Floor)

Designed by Al Glass
‘Liza’ is a trademark
of Becker Designed,
Inc.
All rights reserved.
©2010 Becker
Designed, Inc.
4932 06.01.10 v1

24.75"

68" (To Floor)