BDI 4323 User Manual

Your Linear™ Mirror is designed and engineered for easy

68”

10”

floor

assembly.
Carefully follow this procedure to prevent damage.

Placement and Maintenance

™

Linear
wood veneer and chrome with a moist cloth.

Mirror is designed for indoor use. Clean mirror with glass cleaner, and

Designed by Al Glass.
‘Linear’ is a trademark of Becker Designed, Inc.

All rights reserved. ©2008 Becker Designed, Inc.

Component List

Step 1 - Hanging the Frame Assembly at BDI’s suggested

height:

At 68” from the floor make two marks with a pencil,
10” apart. Make sure your marks are level then
install supplied Picture Hangers (C). Verify that Picture
Hangers are level and hang Frame Assembly (B) from
D-Rings. (See illustration to left)

A - Mirror x 1

The assembly workspace should be a non-marring surface such as carpet. For
missing hardware, please contact BDI Customer Service at:
[e-mail] For all other concerns please contact your local BDI

Retailer.

B - Frame Assembly

*Pre-installed

Rubber Pads x 4
D-Rings x 2

Velcro Strip x 1

A-1

C - Picture Hanger

and

Nails

x 2

Step 2 - Install Mirror to Frame Assembly:
Grasping Mirror carefully with two hands, center mirror over
Frame Assembly, ensuring that Mirror’s cleat (A-1) engages
and hangs on upper horizontal bracket of Frame Assembly
(B-1). Apply gentle pressure at lower portion of Mirror
against Frame Assembly to engage Velcro attachment.

B-1

HIG H PER FORM ANCE

FU RNITURE FO R Y OUR

H O M E

www.bdiusa.com

[e-mail]

2/2008

LinearTM Mirror4323 & 4324

Hanging Instructions