h a n g i n g i n s t r u c t i o n s
F i z z
3780
Your Fizz Mirror can be hung vertically or horizontally. Carefully follow this procedure to prevent any damage.
Placement and Maintenance
Fizz is designed for indoor use. Clean mirror with glass cleaner.
To hang your mirror at BDI’s suggested height:
• Vertical Hanging: At 66” high make two marks with a pencil, 6” apart. Make sure your marks are level then install
supplied hangers. Verify that hangers are level and hang mirror frame from brackets shown (see illustration to right).
• Horizontal Hanging: At 66” high make two marks with a pencil, 39.5” apart. Make sure your marks are level
install supplied hangers. Verify that hangers are level and hang mirror frame from brackets shown (see illustration
below).
39.5"
then
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
6"
66"
Designed by Al Glass
‘Fizz’ is a trademark of Becker Designed, Inc.
All rights reserved. ©2010 Becker Designed, Inc.
Made in China. 3780REV031710v2
66"
to floor
to floor