BDI 2300 User Manual
Component List
H o k k a i d o
2300, 2301, 2302,
2310, 2323
Your Hokkaido Furniture is engineered for easy assembly. Carefully follow
this procedure to prevent any damage.
a s s e m b l y i n s t r u c t i o n s
2323
2300
2301
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
2302
2310
A - Glass Panel x 1
NOTE: This instruction sheet is intended for the entire Hokkaido Table
collection; model 2300 is shown for illustration.
C - Short Metal Leg x 4
B - Wood Panel x 1
D - Long Metal Leg x 4
Placement and Maintenance
Hokkaido Furniture is designed for indoor use on level floors. Clean glass
with glass cleaner, and steel parts and wood veneer with a moist cloth.
Step 1
Unpack and identify the parts listed. The assembly workspace should be a
non-marring surface such as carpet. For missing hardware pieces please
contact BDI Customer Service at customerservice@bdiusa.com. For all
Step 2
Lay Glass Panel (A
) so that the pucks are facing up.
other concerns, please contact your BDI Retailer.
Step 3
Install Short Metal Leg (C) to glass puck.
Step 4
Lay Wood Panel (B)
onto previously installed upper legs. NOTE: Finished wood side facing downward.
Step 5
Install
Long Metal Leg (D) through wood panel hole and into the threaded hole of Short Metal Leg (C).
Step 6
Flip assembled unit over onto base leg position.
Designed by Matthew Weatherly.
‘Hokkaido’ is a trademark of Becker Designed, Inc.
All rights reserved. ©2008 Becker Designed, Inc.
Made in China. 23002301230223102323REV102209v2
D
B
C
A
Glass Puck
1
a s s e m b l y i n s t r u c t i o n s
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
Loading...