BDI 1653 User Manual

spar

1653 1654
1657

a s s e m b l y i n s t r u c t i o n s

bdiusa.com cust [e-mail]

Component List

A - 4mm Hex Wrench

x 1

B - 1/4-20 x 19mm Screw
x 6

C - Leg x 3

D - Glass Top x 1

E - Glass Shelf x 1

Spar is engineered for easy assembly.
Carefully follow this procedure to prevent any
damage.

NOTE: This instruction sheet is intended for
the entire Spar table collection; model 1654 is
shown for illustration.

Placement and Maintenance

Spar is designed for indoor use on level floors.
Clean glass with glass cleaner and steel parts
with a moist cloth.

TWO PERSON ASSEMBLY

Step 1
Unpack and Identify

Unpack and identify the components at left. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at [e-mail]. For all other concerns, please
contact your BDI Retailer.

Step 2
Attach Legs to Glass Top

Place Glass Top (D) upside down on soft surface in order to
prevent damage. Fit Legs (C) into slotted glass puck of Glass

Top (D) and hand tighten Screws (B).

B

C

D

C

B

B

Slotted
Glass
Puck

Designed by Dan Fritz .

These distinctive product congurations are protected by US and

international patents, trade dress, and/or copyright laws.
BDI is trademark of Becker Designed, Inc.
All rights reserved. ©2013, BDI
Made in China. 165316541657REV09132013v1

1

Step 3
Attach Glass Top & Turn Table Over

With a second person holding the Glass Shelf (E) in place,
loosely start all Screws (B) into Glass Pucks. Tighten all 6
Screws (B) using Hex Wrench (A). Lifting by the table’s Legs (C),
turn table over right side up.

B

C

B

E

B

C

C

Glass
Puck

E

spar

16 53 1654 1 657

2

assembly ins tructions

bdiusa.com [e-mail]