BDI 1533 User Manual
comma
1533, 1537,
1533P, 1537P
a s s e m b l y i n s t r u c t i o n s
bdiusa.com customerservice@bdiusa.com
Component List
A - 4mm Hex Wrench
x 1
B - 1/4-20 x 12mm Screw
x 6
C - Leg x 3
D - Glass Top x 1
E - Glass Shelf x 1
Comma is engineered for easy assembly.
Carefully follow this procedure to prevent any
damage.
NOTE: This instruction sheet is intended for
the entire Comma table collection; model 1533
is shown for illustration.
Placement and Maintenance
Comma is designed for indoor use on level
floors. Clean glass with glass cleaner and black
coated metal with a moist cloth. Clean polished
aluminum legs using a high-quality aluminum
TWO PERSON ASSEMBLY
polish and follow its manufacturer’s instructions. More frequent
application of polish for cleaning will be required in coastal areas
near salt water.
Step 1
Unpack and Identify
Unpack and identify the components at left. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at customerservice@bdiusa.com. For all other concerns, please
contact your BDI Retailer.
Step 2
Attach Legs to Glass Shelf
Place Glass Shelf (E) on its CONCAVE edge on a soft surface
in order to prevent damage. Attach Legs (C) to Glass Shelf
(E) ensuring the tab of Leg (C) locks into the slot of the Glass
Puck. Using Hex Wrench (A), tighten Screws (B). DO NOT
OVERTIGHTEN!
B
C
C
Glass
Puck
E
B
E
Designed by Dan Fritz .
These distinctive product congurations are protected by US and
international patents, trade dress, and/or copyright laws.
BDI is trademark of Becker Designed, Inc.
All rights reserved. ©2014, BDI
Made in China. 15331537REV01232014v3
1
Step 3
Attach Glass Top & Turn Table Over
With the Glass Top (D) upside down on a soft surface and the
help of a second person, carefully lower the Shelf and Leg
Assembly onto the Glass Top (D), locating the holes of the Legs
(C) onto the Glass Pucks. Loosely start all Screws (B) into Glass
Pucks. After all Screws (B) are started, tighten using Hex Wrench
(A). DO NOT OVERTIGHTEN! Lifting by the table’s Legs (C), turn
table over right side up.
B
D
C
Glass
Puck
B
D
com ma
1533, 1537, 1 533P, 15 37P
2
assembly instructions
bdiusa.com customerservice@bdiusa.com
Loading...