BDI 1471G User Manual
Component List
tazz
1471G,
1472G,1476G
tables
A - 4mm Hex Wrench
x 1
B - 1/4-20 x 12mm Screw
x 4
C - 1/4-20 x 19mm Screw
x 4
D - Leg x 4
E - Glass Top x 1
assembly instructions
bdiusa.com customerservice@bdiusa.com
Tazz is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
NOTE: This instruction sheet is intended for
the entire Tazz table collection; model 1472G is
shown for illustration.
Placement and Maintenance
Tazz is designed for indoor use on level floors. Clean
glass with glass cleaner and wood with a moist
cloth. Clean polished aluminum legs using a highquality aluminum polish and follow its manufacturer’s
instructions. More frequent application of polish for
cleaning will be required in coastal areas near salt water.
Step 1
Unpack and Identify
Unpack and identify the components at left. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service at
customerservice@bdiusa.com. For all other concerns, please contact
your BDI Retailer.
TWO PERSON ASSEMBLY
Step 2
Attach Legs to Wood Shelf
Place Wood Shelf (F) on its side on a soft surface in order to
F - Wood Shelf x 1
prevent damage. Attach Legs (D) to Wood Shelf (F) ensuring the
tab of Leg (D) locks into the slot of the Mounting Plate. Using Hex
Wrench (A), slightly tighten Screws (C).
D
D
F
C
Mounting
Plate
C
F
Designed by Dan Fritz .
These distinctive product congurations are protected by US and international patents,
trade dress, and/or copyright laws.
BDI is trademark of Becker Designed, Inc.
All rights reserved. ©2014, BDI
Made in China. 1471G1472G1476GREV122914v1
1
Step 3
Attach Glass Top & Turn Table Over
With the Glass Top (E) upside down on a soft surface and the help
of a second person, carefully lower the Shelf and Leg Assembly
onto the Glass Top (E), locating the holes of the Legs (D) onto the
Glass Pucks. Loosely start all Screws (B) into Glass Pucks. After
all Screws (B) are started, tighten all screws including from Step 2
using Hex Wrench (A). DO NOT OVERTIGHTEN! Turn table over
right side up.
B
D
Glass Puck
B
E
E
tazz
1471G, 1472G. 1476G tab le s
2
assembly instructions
bdiusa.com customerservice@bdiusa.com
Loading...