Page 1
Strata™ Assembly Instructions
Models 1401 & 1402 Model 1402 shown
Your Strata™ Home Furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Top Shelf x 1
Spacer Tube x 4
Threaded Stud x 4
Steel Leg x 2
Assembled Table x 1
Unpack and identify the parts shown. The assembly workspace should be a Clean non-marring surface such as carpet. If any parts are missing or damaged contact: BDI Customer Service at
customerservice@bdiusa.com
Step 1: Attach the spacer tubes with pre-installed threaded stud to the underside of the top
shelf.
Step 2 : Laying the top shelf and assembled cabinet on their side, Use the Long screw to
attach top shelf assembly to the assembled cabinet. Secure with Hex wrench.
Step 3: Attach metal legs to bottom surface of table assembly using socket screw and hex
wrench. Install leveler glides into the bottom of leg. Level table as needed.
Placement and Maintenance
Strata™ Home Furniture is designed for indoor use on level floors. Clean steel parts and wood
veneer with a moist cloth.
dress, and/or copyright laws.
Narrow Coffee Table
Model 1401
marks of Becker Designed Inc.
Long Screw x 4
Socket Screw x 8
Leveler Glide x 4
Hex Wrench x 1
Designed by Jason
Guidry.
These distinctive product
congurations are
protected by US and
international patents, trade
“Strata” and BDI are trade-
All Rights reserved. ©2005,
BDI
Page 2
Strata 1410TM
Top Shelf x 1
Spacer Block x 1
Assembled Cabinet x 1
Spacer tube x 2
Metal Leg x 2
Assembly Instructions
Floor Glide x 4
Socket Screw x 8
Wood Dowel x 4
Silver Cam Bolt x 6
Threaded Stud x 2
Installed.
Spacer Tube x 2
(Includes cam bolt)
Hex Wrench x 1
Page 3
Strata™ Model 1410 assembly instructions
Your Strata™ Home Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Step 1
A
A - Install cam bolts x 2 into underside of top shelf along back edge. Attach spacer block, with wood dowels installed,
to top shelf as shown. Ensure that cam nuts are facing rearward. Cam nuts can be tightened with supplied hex wrench. Align
Arrow on face of cam nut to face toward the open end of the hole. Once cam bolt is properly seated, secure by rotating cam
nut clockwise approximately 3/4 of 1 rotation.
B - Install spacer tubes x 2 along front edge of top panel as shown. Hand tighten only!
Step 2
B
B
A
Cam Nut
(pre-installed)
A - Install cam bolt x 2 along the top back edge of the assembled cabinet. Attach top shelf assembly to the assem-
bled cabinet.
B- secure front spacer tubes with cam nut and hex wrench as shown. Note: drawer must be removed for this operation.
Step 3
Attach the metal leg x 2 to the bottom side of the assembled cabinet using the socket screw x 8 and hex
wrench.
Install the leveler glides to the bottom of the legs and level as
needed.
Placement and Maintenance
Strata™ Home Furniture is designed for indoor use on level
floors. Clean steel parts and wood veneer with a moist cloth.
Designed by Jason Guidry. These distinctive product congurations are protected by US and international patents, trade press, and/or copyright
laws. “Strata” and BDI are trademarks of Becker Designed Inc. All Rights reserved. ©2005, BDI
Socket Screw x 8
Floor Glide x 4
Page 4
Strata 1423TM
Top Shelf x 1
Spacer Tube x 3
Spacer Block x 3
Assembled Cabinet x 1
Metal Leg x 3
Assembly Instructions
Floor Glide x 6
Socket Screw x 12
Wood Dowel x 6
Silver Cam Bolt x 6
Threaded Stud x 3
Installed.
Spacer Tube x 3
(Includes cam bolt)
Hex Wrench x 1
Page 5
Strata™ Model 1423 assembly instructions
Your Strata™ Home Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Step 1
A
A - Install cam bolts x 2 into underside of top shelf along back edge. Attach spacer block, with wood dowels installed,
to top shelf as shown. Ensure that cam nuts are facing rearward. Cam nuts can be tightened with supplied hex wrench. Align
Arrow on face of cam nut to face toward the open end of the hole. Once cam bolt is properly seated, secure by rotating cam
nut clockwise approximately 3/4 of 1 rotation.
B - Install spacer tubes x 2 along front edge of top panel as shown. Hand tighten only!
Step 2
B
A
Cam Nut
(pre-installed)
A - Install cam bolt x 3 along the top back edge of the assembled cabinet. Attach top shelf assembly to the assem-
bled cabinet.
B- secure front spacer tubes with cam nut as shown. Note: drawers must be removed for this operation.
B
Step 3
Attach the metal leg x 3 to the bottom side of the assembled cabinet using the socket screw x 12 and hex
wrench.
Install the leveler glides to the bottom of the legs and level as
needed.
Placement and Maintenance
Strata™ Home Furniture is designed for indoor use on level
floors. Clean steel parts and wood veneer with a moist cloth.
Designed by Jason Guidry. These distinctive product congurations are protected by US and international patents, trade press, and/or copyright
laws. “Strata” and BDI are trademarks of Becker Designed Inc. All Rights reserved. ©2005, BDI
Socket Screw x 12
Floor Glide x 6
Loading...