BDI 1343 User Manual
ASSEMBLY INSTRUCTIONS
DINO TABLES
1343 1344 1347
Placement and Maintenance
DINO TABLES are designed for indoor use on level floors. Clean glass with glass cleaner, and shelf with a moist cloth.
DINO 1343
COFFEE TABLE
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
DINO 1347
END TABLE
DINO 1344
SMALL COFFEE TABLE
Component List
DINO TABLES are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com.
For all other concerns, please contact your BDI Retailer.
A - Hex Wrench 4mm
x 1
B - 1/4-20 x 3/4
Flat Head Screws
4mm Socket Drive
x 6
C - 1/4-20 x 1/2
Flat Head Screws
4mm Socket Drive
x 3
D - Legs x 3
E
F
H
E - Shelf x 1
F - Glass x 1
G - Felt Pads x 3
H - Felt O-Rings x 3
Designed by Louis A. Lara
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2011 BDI
1343 1344 1347 Revision: 02-23-11
1
C
D
B
G
Step 1 - Attach Legs to Shelf
Place long edge of Shelf (E) on soft surface in order to prevent damage.
Attach
Attach first
Optional: If placed on hard floor, attach
Legs (D) to Shelf (E) using Screws (B) and tighten using Hex Drive Wrench (A).
Leg (D) to middle point of Shelf (E).
Felt Pads (G) to bottom of Legs (D).
G
D
Attach 1st
D
A
B
D
Step 2 - Attach Glass to Legs
Attach Felt O-Rings (H) to Glass Pucks.
Turn table up onto
Glass (F) onto Legs (D).
Place
Loosely start all
After all
Screws (C) using Hex Drive Wrench (A).
Screws (C) are started, then tighten
Legs (D).
Screws (C) into Glass Fittings.
G
B
D
G
F
E Shelf
Place long edge on soft surface
in order to prevent damage.
G
F
H
D
Glass Puck
C
DINO TABLES
1343 1344 1347
D
A
ASSEMBLY INSTRUCTIONS
2
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Loading...