Page 1
ASSEMBLY INSTRUCTIONS
TRAVERSE
1242 1246 1248
Placement and Maintenance
TRAVERSE tables are designed for indoor use on level floors. Clean glass with glass cleaner, and wood veneer with a moist cloth.
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Traverse 1242 Rect Coffee Table
Traverse 1246 End Table
Traverse 1248 Console Table
Component List
TRAVERSE tables are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com.
For all other concerns, please contact your BDI Retailer.
A - 4mm Hex Wrench x 1
B - 1/4-20 x 19mm Screws x 8
To attach Hubs
C - 1/4-20 x 89mm Screws x 4
To attach Legs to Shelf
I
D - 1/4-20 x 32mm Screws x 4
To attach Glass to Legs
E - M6 Leveler x 4
F - Legs x 4
G - Shelf x 1
H - Hubs x 2
I - Glass x 1
Designed by Jason Guidry
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2011 BDI
1242 1246 1248 Revision: 03-09-11
F
1
H
F
G
F
H
F
Page 2
Step 1
Attach Hubs to 1 Leg with Screws (B)
and tighten using Hex wrench.
Note: 1242 and 1248 attach hubs to
shorter legs first.
B
F
H
F
Step 2
Attach 1 Leg to Shelf
Screw (C) and tighten with
Hex Wrench (A).
Note: Attach through
round tube on
Leg (F).
with
A
F
G
B
F
H
F
A
C
TRAVERSE
1242 1246 1248
Carefully place Shelf Edge
Note: Attach through
round tube on
on clean carpet
Leg (F)
2
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Page 3
Step 3
Attach 2nd and 3rd Legs
Using Screws (B) for Hubs (H) and using
Screws (C) for Legs (F) and tighten with
Hex Wrench (A).
B
B
F
B
B
A
C
A
Step 4
Attach 4th Leg
Hubs (H) and Screw (C) for Leg (F)
and tighten using
A
with Screws (B) for
Hex Wrench (A).
F
G
F
F
B
C
F
A
B
G
F
TRAVERSE
1242 1246 1248
3
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Page 4
Step 5
Install Levelers into Legs
After all Levelers (E) are installed,
place table in desired position, adjust
levelers as necessary.
F
E
Step 6
Attach Glass (I)
using Screws (D)
and tighten with
Hex Wrench (A).
I
Carefully lower Glass (I) onto Legs (F)
I
Align Glass Fittings to holes in Legs (F)
F
D
A
TRAVERSE
1242 1246 1248
Align Glass Fittings
to holes in
Start all Screws (D)
before tightening
Legs (F)
Recommended
2-person Step
4
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Loading...