BDI 1156 Assembly Instructions
TERRACETM 1156
END TABLE
bdiusa.com
customerservice@bdiusa.com
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to
your BDI products. Register today, and you will be entered to win
free a BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Your Terrace End Table is designed for indoor use on level floors.
Clean wood veneer and steel parts with a moist cloth and clean
glass with glass cleaner.
Terrace is engineered for easy assembly. Carefully follow this
procedure to prevent any damage. Do not use power tools for
assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet.
For missing hardware pieces, contact BDI Customer Service at:
customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
T2 Hex Wrench x 1
H1 1/4-20 x 19 mm
Machine Screw x 16
C1 Glass Top x 1
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Terrace & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in China. 11.16.2016 V1
A1 Wood Panel x 1
A2 Leg x 4
Step 2 - Attach Legs
With one hand, carefully position the wood panel A1 on edge. With other hand, slide 1 leg A2 into a notch on
the bottom of wood panel A1 aligning the attachment plate with the corresponding recessed area. Attach the
leg with 4 screws H1 using hex wrench T2. Attach the other 3 legs.
A1
H1 x 4
A2
A2
H1 x 4
T2
2
TERRACE 1156
END TABLE
customerservice@bdiusa.com
bdiusa.com
Loading...