BDI 1055, 1065 Instruction Manual

MILOTM 1055/1065

MEDIA TABLE

bdiusa.com

[e-mail]

Product Registration

Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to
your BDI products. Register today, and you will be entered to win
free a BINK table from BDI: www.bdiusa.com/register

Placement and Maintenance

Your MILO Media Table is designed for indoor use on level floors.
Clean wood veneer, aluminum and steel parts with a moist cloth.

Milo is engineered for easy assembly. Carefully follow this
procedure to prevent any damage. Do not use power tools for
assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet.
For missing hardware pieces, contact BDI Customer Service at:
[e-mail].

For all other concerns, please contact your BDI retailer.

Tool Included:

T1 Hex Wrench x 1

H1 Flathead Screws x 4

C1 Top Panel x 1

Designed by Louis A Lara.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Milo & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2018, BDI
Patent: www.bdiusa.com/ip
Made in China. 02.11.2020 V2

A1 Mounting Plate x 1

A2 Post x 1

H1 Threaded Rods x 2

A3 Base x 1

Step 2 - Attach Mounting Plate to Top Panel

Place top panel C1 upside down on a non-marring surface. Position mounting plate A1 over the 4 threaded
holes with the stem towards the outside and attach with 4 flathead screws H1 using hex wrench T1.

T1

H1

Overhead View

Threaded
holes

Stem towards
edge

A1

C1

2

MILO 1055
MEDIA TABLE

[e-mail]

bdiusa.com