INSTRUCTION
MANUAL
Laser Force Pistols with Vests
Ver. 1
SKY5060 + SKY5064
Thank you for choosing us! Since 2002, Best
Choice Products has been bringing customers
high-quality products at the absolute lowest
price. With everything ranging from instruments
and toys to furniture and outdoor, we’ve got
your everyday living essentials covered. We’re
centered around a customer-first philosophy –
with free shipping, exceptional customer
service, and a catalog sourced with you in mind.
NOTICE
• Avoid exposure to direct sunlight and excessive heat.
• Do not immerse product in water.
• Do not alter this product in any way as it may result in product failure.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future reference.
REQUIRED
+
AAA
PHILLIPS
SCREWDRIVER
3 AAA BATTERIES
PER GUN
PISTOL DIAGRAM
LIFE INDICATORS (3)
INFRARED
EMISSION
INFRARED
RECEIVER
SHOOTING
INDICATOR
-
3 AAA BATTERIES
SELECTION
+
PER VEST
AAA
-
POWER SWITCH
TEAM
GUN
SELECTION
1 PERSON
ASSEMBLY
INDICATOR
TRIGGER
TEAM
APPROXIMATELY
5 MIN.
ASSEMBLY
RELOAD
• Life Indicators (3): Each life indicator represents 3 health (for a total of 9).
• Low Battery: The 3 life indicators will flash slowly to indicate that the blaster has low battery.
• Max Strike Distance: 130 feet
Pg. 3
VEST DIAGRAM
LIGHT INDICATOR / INFRARED RECEIVER
LIFE INDICATOR
• Infrared Receiver: Vibrates and flashes colors when hit
• Light Indicator: Displays team color
• Life indicators (4): Each life indicator represents 3 health (for a total of 12)
NOTE: Pistols and vests have separate life indicators. The pistol has 9 heath points and the vest has
12 health points; therefore, each player has combined 21 health points.
BATTERY INSTALLATION - PISTOL & VEST
1. Use a screwdriver to remove the battery cover.
2. Insert 3 AAA batteries. Make sure the batteries are inserted with the correct polarity.
3. Replace the battery cover.
PISTOL VEST
Pg. 4
VEST INSTRUCTIONS
1. Place vest strap over your neck.
2. Fasten buckle in the back. Tighten straps to secure vest.
FRONT BACK
OPERATING INSTRUCTIONS
Switch the pistol on. The pistol will default to single shot mode.
1
Press the team selection button to toggle between teams. There are 4 colors to represent 4
2
possible teams – blue, red, green, or white. You cannot shoot your own team.
Switch the vest on and it will toggle dierent colors. Use the pistol to shoot the vest and the vest
3
will turn the color of your team. The vest is now assigned to your team. You cannot shoot your
own team’s vest.
Press the gun selection button to toggle between 4 gun modes:
4
GUN MODES
SHOTS
HEALTH REDUCED
BY EACH SHOT
When you run out of ammo, press the reload button under the grip to reload.
The pistol and the vest are infrared receivers with a dierent amount of health points (pistol has
5
9 health and vest has 12 health). Aim and shoot at an opponent’s pistol or vest to register a hit.
Once hit, the life indicator will reduce accordingly and the pistol/vest will vibrate and emit a sound.
When your life indicator reaches 0, the indicators will flash and you will not be able to shoot anymore.
Single Shot
Laser Gun Machine Gun Plasma Gun
Pg. 5
RESET PISTOL & VEST
• A player cannot change teams or reset a gun during a game.
• Anti-cheat function: To change teams or reset a gun, a player on an opposing team must point at your
gun and hold down the team selection button. The gun will say “full blood resurrection” and you will be
able to select a dierent team.
• To reset a vest, switch the vest o and on.
CARE
• If unused for a long period of time, remove the batteries.
• If necessary, clean this product with a damp cloth.
COMPATIBLE SETS
With the ability to mix and match Best Choice Products Laser Force Blaster Sets, you’ll have more than
enough blasters for your next event, birthday party, or family reunion!
TROUBLESHOOTING
PROBLEM
Infrared signal could not reach the
Blasters do not work
Blasters operate
automatically
NOTE: If normal operation of the product is disturbed or interrupted, strong electro-magnetic interference
may be causing a problem. Reset the product by turning it completely o and then back on. If normal
operation does not resume, try replacing the batteries and moving the product to another location.
blaster because the distance is too far
Obstacles blocking the infrared signal
Overexposure to direct sunlight
Competing infrared transmission from
other devices, such as TV remotes
REASON
Low battery
or angle is wrong
Low battery
SOLUTION
Replace the batteries
Reduce the firing distance and firing angle
Remove the obstacles
Replace the batteries
Block sunlight or play in an area
without direct sunlight
Stop using or move away from
competing infrared devices
Pg. 6
Check out more great products:
bestchoiceproducts.com
WARNINGS REGARDING BATTERIES
• Do not mix alkaline, standard (carbon zinc) and rechargeable
(nickel hydride) batteries.
• Do not mix old and new batteries.
• Non-rechargeable batteries should not be charged.
• Rechargeable batteries should be charged under adult supervision only.
• Exhausted batteries should be removed.
• The supply terminals should not be short-circuited.
• Do not put batteries next to or in a heat source
(fire, electronic heating device, etc.).
• Do not hit batteries against hard objects.
• Do not submerge batteries in water.
• Batteries should be inserted with the correct polarity.
PRODUCT WARRANTY INFORMATION
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the
item is returned in its original product packaging and all accessories from its original shipment are included.
All returned items will receive a full refund back to the original payment method. All returned items will not be
charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice
Products Customer Service Representative when the return request is submitted. Items received without an RA
may not be accepted or may increase your return processing time. Once an item has been received by Best Choice
Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If the
reason for return is a result of an error by Best Choice Products then Best Choice Products will provide a pre-paid
shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and is the
customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are
not considered undamaged until they are received by Best Choice Products and verified as such. All damages to
items are the customer’s responsibility until the item has been received by and acknowledge by Best Choice
Products as undamaged.
CONTACT US, WE’RE HERE 7 DAYS A WEEK TO HELP YOU!
bestchoiceproducts.com customerservice@
bestchoiceproducts.com
844.948.8400
LEARN MORE!
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
Loading...