
NOTICE
• Firmly secure all bolts, screws, and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• Product is intended for indoor use only.
• If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or
factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
• To wipe down the furniture, use a damp cloth. Then, wipe it down once more with a dry cloth.
• The chair has a weight capacity of 260 pounds and the table has a weight capacity of 220 pounds.
Please do not exceed that amount of weight on this item.
Please retain these instructions for future reference.
TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
ALLEN WRENCH
HARDWARE
1
M7 x 60MM
HEX SCREW
32 PCS
2-HOLE
5
BARREL NUT
4 PCS
(PROVIDED)
2
6
WRENCH
(PROVIDED)
M8 x 30MM
DOWEL
72 PCS
WASHER
8 PCS
LBS
260 LBS
CHAIR
CAPACITY
3
7
M4 x 40MM
SCREW
16 PCS
NUT
8 PCS
LBS
220 LBS
TABLE
CAPACITY
4
1 PERSON
ASSEMBLY
M8 x 60MM
BOLT
8 PCS
APPROXIMATELY
60 MIN.
ASSEMBLY
Pg. 2

PARTS
RIGHT FRAME
A
4 PCS
MIDDLE SLAT
E
8 PCS
I
TABLETOP LEG
1 PC
LEFT FRAME SEAT TOP SLAT
B
4 PCS
BOTTOM SLAT FRONT FRAME MIDDLE SUPPORT
F
4 PCS
C
4 PCS
G
4 PCS
D
H
J
4 PCS
4 PCS
4 PCS
Pg. 3

PRODUCT ASSEMBLY
1
1
D
Please retain these instructions for future reference.
E
F
2
G
Insert eighteen part 2 dowels into the part D top slat, part E middle slats, part F bottom slat, and part
G front frame, four dowels on each.
Pg. 4

PRODUCT ASSEMBLY
Arrange the slats/front frame between the part A right frame and part B left frame, making
sure to insert the dowels into their corresponding holes on the frames
2
1
B
A
1
H
Secure the slats/front frame with six part 1 hex screws, three hex screws on each side. Attach the part
H middle support with two part 1 hex screws, one on each side.
Pg. 5

PRODUCT ASSEMBLY
3
3
3
3
3
C
Attach the part C seat with four part 3 screws. Repeat steps 1 to 3 to build three additional chairs.
Pg. 6

PRODUCT ASSEMBLY
4
1
5
4
J
Insert a part 5 barrel nut into a part J leg. Screw two part 4 bolts into the barrel nut. Repeat on the
other three legs.
5
6
7
I
Attach the legs to the part I tabletop with eight part 6 washers and eight part 7 nuts, two washers/nuts
per leg.
Pg. 7

ASSEMBLY IS COMPLETE!
PRODUCT WARRANTY INFORMATION
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the
item is returned in its original product packaging and all accessories from its original shipment are included. All
returned items will receive a full refund back to the original payment method. All returned items will not be charged
a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice
Products Customer Service Representative when the return request is submitted. Items received without an RA
may not be accepted or may increase your return processing time. Once an item has been received by Best Choice
Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If the
reason for return is a result of an error by Best Choice Products then Best Choice Products will provide a pre-paid
shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and is the
customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are
not considered undamaged until they are received by Best Choice Products and verified as such. All damages to
items are the customer’s responsibility until the item has been received by and acknowledge by Best Choice
Products as undamaged.
CONTACT US; WE’RE HERE 7 DAYS A WEEK TO HELP YOU!
bestchoiceproducts.com customerservice@
bestchoiceproducts.com
844.948.8400
LEARN MORE!
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
Pg. 8
inadequate maintenance, or neglect of this product.