SKY4114 + SKY4115 + SKY4116 + SKY5004 + SKY5005 + SKY5006
SKY5007 + SKY5008 + SKY5009 + SKY5010 + SKY5011 + SKY5012
Ver. 2
INSTRUCTION
MANUAL
10-Foot Solar LED
Patio Oset Umbrella
Pg. 2
Solar panel
requires 6 to 7
hours of direct
sunlight to
fully charge.
| 3
4 PCS
M8 x 16mm
SCREW
HARDWARE
1
TOOLS REQUIRED
APPROXIMATELY
15 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
• Umbrella base weights are not included. Do not use this umbrella without umbrella base weights.
• Place umbrella on a stable and level surface.
• Umbrella is suitable for rain showers and light wind.
• Do not use umbrella in inclement weather, such as snow, heavy rain, thunderstorms, or strong wind.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
• Be aware that some parts are heavy and have sharp edges.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or
factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
NOTICE
Please retain these instructions for future reference.
4 PCS
WASHER
2
1 PC
KNOB
3
1 PC
SHORT CROSSBAR
PARTS
A
1 PC
LONG CROSSBAR
B
1 PC
BASE
C
WRENCH
(PROVIDED)
4 |
1
1. Hold the part D umbrella upside down and shake gently to separate the umbrella ribs. If necessary,
carefully pull the ribs apart to free them.
2. Slowly turn the crank to open the umbrella. Make sure that the ribs are not stuck together.
Insert the part B long crossbar
into the part A short crossbar.
Attach the part C base to the crossbars
with four part 1 screws and four part 2
washers. Partially screw in the part 3 knob.
BEFORE FIRST USE
PRODUCT ASSEMBLY
2
1 PC
UMBRELLA
PARTS
D
1 PC
SOLAR PANEL
E
B
C
A
3
1
2
x4
x4
CHARGING THE LIGHTS
• Solar panel requires 6 to 7 hours of direct sunlight to fully charge.
• LED lights last for 6 to 7 hours on a single charge.
• If lights are not working, fully charge the solar panel and try again.
| 5
4
PRODUCT ASSEMBLY
3
Insert the battery connector from the part D umbrella into the part E solar panel.
Screw the solar panel onto the top of the pole.
Firmly insert the part D umbrella into the part C base.
Tighten the part 3 knob to lock it in place.
E
D
D
D
3
6 |
FEATURES
Opening Canopy
Adjusting Tilt/Lights
1. Flip the handle and move the arm up.
2. Lock it in your desired position. Slide the sleeve down
to secure the arm.
3. Slowly turn the crank to open the canopy.
1. Lift the sleeve, flip the handle, and move
the arm up/down to adjust the tilt angle of
the umbrella.
2. Lock it in your desired position and
replace the sleeve.
3. Press the power switch on the canopy to
turn on LED lights.
FEATURES
| 7
CLEANING
• Wipe clean with mild detergent, warm water, and a soft cloth.
• Do not use abrasive materials or cleaners.
• Store in a dry area shielded from the weather.
• If necessary, cover with a furniture cover or tarp.
• Turn the crank counterclockwise to close the canopy.
• Close the canopy when
umbrella is not in use.
• Flip the handle and move
the arm all the way down
to prepare the umbrella
for storage.
• Store in a dry area shielded
from the weather.
• If necessary, cover with a
furniture cover or tarp.
Closing Canopy
Storage
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
PRODUCT WARRANTY INFORMATION
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
HELP CENTER
Product Assembly
Product InquiryChat Support
Returns & Refunds
Orders FAQ
WARNING
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!
Loading...