INSTRUCTION
MANUAL
Double Blade Pedestal Fan
Ver. 2
SKY3865
Thank you for choosing us! Since 2002, Best
Choice Products has been bringing customers
high-quality products at the absolute lowest
price. With everything ranging from instruments
and toys to furniture and outdoor, we’ve got
your everyday living essentials covered. We’re
centered around a customer-first philosophy –
with free shipping, exceptional customer
service, and a catalog sourced with you in mind.
NOTICE
• The product is intended exclusively for non-commercial operation as a mobile fan.
• The product must be placed on an even, horizontal surface with clearance on all sides.
• The product is intended for indoor use only.
• Exercise caution and only use when in good condition. Do not use this device if you are tired, ill, if you
have ingested alcohol, medication or illegal drugs.
• This product is not intended to be used by persons (including children) or who are limited in their
physical, sensory or mental capacities or who lack experience and/or knowledge of the product
unless they are supervised, or have been instructed on how to use the product, by a person
responsible for their safety.
• If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or
factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future reference.
WARNING
• Never put objects through the wire fan guard and into the product.
• Do not use fan with the wire fan guard removed.
• Objects that can be pulled (e.g. curtains, plants), must not be in the immediate vicinity.
• Never expose the product to water or other liquids.
• The product must not be operated in rooms with bathtubs, showers, or swimming pools, or near
to wash basins or water connections.
• Never use the device in a room where there is a danger of explosion or in the vicinity of flammable
liquids or gases.
• Ensure that a device which has been switched o cannot be restarted unintentionally.
• Do not use if the on/o switch that does not function correctly.
• Do not let children play with this device.
• Keep the device away from children and other unauthorized persons.
• Do not overload the device. Do not use the device for purposes for which it is not intended.
• The device may only be connected to a socket that is correctly installed and grounded.
• Do not route power cord under carpet or cover cord with rugs or similar cloth. Arrange cord so it
will not be tripped over.
• Do not touch the mains plug with wet hands.
• Always pull out the mains plug at the plug and not by the cable.
• Do not bend, crush, pull or drive over the power cable. Protect the cable from sharp edges, oil,
and heat.
• Do not lift the device using the cable or use the cable for purposes other than intended.
• Check the plug and cable before each use.
• If the power cable is damaged, immediately disconnect the plug. Never use the device if the
power cable is damaged.
• Make sure that the device is switched o before plugging or unplugging the main cable.
• Pull the plug out if the device is not in use, during relocation, or cleaning.
Pg. 3
TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
PARTS
1 PERSON
ASSEMBLY
APPROXIMATELY
20 MIN.
ASSEMBLY
A
POLE
D
REAR GUARD/
LARGE BLADES
G
REMOTE
1 PC
1 PC
B
BASE
E
SMALL BLADES
C
MOTOR HOUSING/
CONTROLS
1 PC 1 PC
F
FRONT GUARD
1 PC
1 PC
Pg. 4
1 PC
PRODUCT ASSEMBLY
1
A
B
2
C
A
Remove the bolt/washer from the
part A pole. Replace the bolt/washer
to attach the pole to the part B base.
Slide the part C motor housing/controls onto the pole
and secure it by tightening the knob on the back.
NOTE:
Twist the pole to adjust height.
BACK
Pg. 5
PRODUCT ASSEMBLY
3
Remove the spacer and fastener.
NOTE: Twist fastener RIGHT to loosen and LEFT to tighten.
4
C
Pg. 6
D
Squeeze clip to remove large blades from part D rear guard.
PRODUCT ASSEMBLY
5
Slide rear guard onto motor housing
and secure it by replacing the spacer.
NOTE: Align the nubs on the motor
housing to the corresponding holes
on the rear guard.
6
D
C
BACK OF BLADE
Slide on the large blades.
D
Pg. 7
PRODUCT ASSEMBLY
7
Slide on the part E small blades and
secure it by replacing the fastener.
NOTE: Insert nub on back of small
blades to hole on large blades.
8
E
Attach the part F front guard.
Tighten the screw on the bottom
to secure it to the rear guard.
Pg. 8
F
CONTROL PANEL FUNCTIONS
SLEEP MODE
SPEED
POWER/SPEED
TIMER
FAN MODES
OSCILLATE
• Power/Speed: Cycle between power on/o, low, medium, and high fan settings.
– Alternate Power O: Press and hold power/speed button.
Sleep Mode: Gives the impression of a light breeze suitable for sleeping.
Wind Mode: Mimics a soft wind that grows into a gust.
Steady Mode: Gives consistent airflow.
WIND MODE
STEADY MODE
TIME INDICATOR LIGHTS
NOTE: Up to four of the time
indicator lights may be on at
the same time to display the
total time (e.g. if the 4h and
2h lights are on, it indicates
a total time of 6 hours).
REMOTE FUNCTIONS
SPEED
FAN MODES
OSCILLATE
ON/OFF
TIMER
• On/O: Turn fan on and o.
• Speed: Cycle between the low, medium,
and high fan settings.
• Fan Modes: Cycle between steady, wind,
and sleep modes.
• Timer: Set a timer ranging from 0.5 hours
to 7.5 hours.
• Oscillate: Turn oscillation on and o.
Pg. 9
ADJUSTING TILT
• Push fan guard up and down to adjust tilt.
CLEANING
1. Pull the power cord from the outlet.
2. Remove front guard.
3. Wipe down blades with a soft cloth and mild detergent.
4. Wipe down front/rear guards with a soft brush and mild detergent.
Do not clean with gasoline, benzene or thinner, or other hazardous liquids/abrasives.
TROUBLESHOOTING
Problem
Fan not working
Fan excessively noisy
Fan vibrates
Pg. 10
Reason
Cord unplugged
Blown fuse/circuit breaker tripped Replace fuse, or reset breaker
Low voltage
Overheating
Loose fan blades Tighten fan blades
Uneven surface Place on level surface
Dirty fan blades
Solution
Plug in
Ensure there is proper voltage in outlet
Clear obstructions and wait for motor to cool
Clean fan blades
Check out more great products:
bestchoiceproducts.com
CHANGING THE FUSE
The following should ONLY be conducted by a qualified professional:
1. Pull the power cord from the outlet.
2. Slide open the fuse access cover by pushing it towards the blades of the plug.
3. Carefully remove the fuse. Push the fuse from the other side or turn the fuse
holder over.
4. Replace fuse with a 5 Amp, 125 Volt fuse only.
5. Close the fuse access cover.
WARNING: Do not replace plug as it contains a fuse that should not be removed.
Discard product if the plug is damaged.
FUSE
PRODUCT WARRANTY INFORMATION
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
CONTACT US; WE’RE HERE 7 DAYS A WEEK TO HELP YOU!
bestchoiceproducts.com customerservice@
bestchoiceproducts.com
844.948.8400
LEARN MORE!
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
Loading...