INSTRUCTION
MANUAL
TV Stand Media Console
Ver. 2
SKY3766 + SKY3767 + SKY3768
NOTICE
• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws and knobs before use.
• If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or
factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
• To wipe down the furniture, use a damp cloth. Then, wipe it down once more with a dry cloth.
Please retain these instructions for future reference.
TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
HARDWARE
1
M4 x 35mm
SCREW
8 PCS
5
SLIDER
SCREW
2 PCS
9
CAM CAP
4 PCS
2
6
10
M4 x 12mm
SCREW
16 PCS
HANDLE
1 PC
DOWEL
14 PCS
LBS
44 LBS
TOP SHELF
CAPACITY
3
7
11
LBS
20 LBS
OTHER SHELVES
CAPACITY
M3 x 12mm
SCREW
6 PCS
CAM BOLT
18 PCS
SLIDER (L/R)
1 SET
1 PERSON
ASSEMBLY
4
M4 x 15mm
SCREW
8
CAM LOCK
12
LEG
APPROXIMATELY
45 MIN.
ASSEMBLY
2 PCS
18 PCS
4 PCS
13
Pg. 2
GLUE
1 PC
PARTS
A
DIVIDER
1 PC
D E
LEFT SIDE
1 PC
G
BACK
1 PC
B
RIGHT SIDE
DRAWER BACK
H
TABLETOP
C
BOTTOM
1 PC 1 PC
F
MIDDLE SHELF
1 PC 1 PC
I
LEFT PANEL
1 PC 1 PC
J
RIGHT PANEL
M
FRONT PANEL
1 PC
1 PC
K
BACK PANEL
L
DRAWER BOTTOM
1 PC 1 PC
Pg. 3
PRODUCT ASSEMBLY
1
Attach the part 11 slider set (L/R) to the part B
right side and part A divider with six part 3
screws, three screws per slider railing.
NOTE: Slide the railing back and forth to reveal
the screw holes.
11
A B
2
3
x6
A
8
x4
7
C
Attach the right side and divider to the part C bottom with four
part 7 cam bolts, two part 10 dowels, and four part 8 cam locks.
NOTE: Use part 13 glue to secure the dowels.
Pg. 4
x4
13
B
10
x2
PRODUCT ASSEMBLY
3
Attach the part D left side with two part 7 cam bolts,
two part 10 dowels, and two part 8 cam locks. Turn the cam
locks to secure the left side. Insert two part 9 cam caps.
NOTE: Use part 13 glue to secure the dowels.
D
E
x2
9
Slide in part E drawer back.
Attach the part F middle shelf with four part 7 cam bolts,
two part 10 dowels, and four part 8 cam locks. Turn the
cam locks to secure the middle shelf.
4
Carefully lay the assembly down.
Attach the part G back with four part 10
dowels and four part 1 screws.
NOTE: Use part 13 glue to secure the dowels.
x4
10
F
8
x6
7
x4
10
x6
x4
1
G
TOP VIEW
Pg. 5
PRODUCT ASSEMBLY
5
Unscrew the connecting plate from
four part 12 legs. Attach four connecting
plates with sixteen part 2 screws, four
screws per plate. Screw the legs back
onto the connecting plates.
6
H
BOTTOM VIEW
x4
12
x4
10
8
7
2
x16
x4
x4
x2
9
BACKSIDE
Stand the assembly upright.
Attach the part H tabletop with four part 7 cam bolts, four part 10 dowels, and four part 8 cam locks.
Turn the cam locks to secure the tabletop. Insert two part 9 cam caps.
NOTE: Use part 13 glue to secure the dowels.
Pg. 6
PRODUCT ASSEMBLY
7
I
8
Slide in part L drawer bottom.
Attach a part 6 handle to the part M front
panel with two part 4 screws. Attach the
front panel with four part 7 cam bolts
and four part 8 cam locks. Turn the cam
locks to secure the front panel.
L
x4
8
6
J
x2
4
x4
7
K
Attach the part I left panel and part J right panel to the part K
back panel with four part 1 screws, two screws per panel.
M
x4
1
9
x2
5
Attach the railings of the slider set (L/R) to the drawer
with two part 5 screws, one screw on each side.
Slide in the drawer.
Pg. 7
ENJOY YOUR PRODUCT!
PRODUCT WARRANTY INFORMATION
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the
item is returned in its original product packaging and all accessories from its original shipment are included. All
returned items will receive a full refund back to the original payment method. All returned items will not be charged
a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice
Products Customer Service Representative when the return request is submitted. Items received without an RA
may not be accepted or may increase your return processing time. Once an item has been received by Best Choice
Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If the
reason for return is a result of an error by Best Choice Products then Best Choice Products will provide a pre-paid
shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and is the
customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are
not considered undamaged until they are received by Best Choice Products and verified as such. All damages to
items are the customer’s responsibility until the item has been received by and acknowledge by Best Choice
Products as undamaged.
CONTACT US; WE’RE HERE 7 DAYS A WEEK TO HELP YOU!
bestchoiceproducts.com customerservice@
bestchoiceproducts.com
844.948.8400
LEARN MORE!
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
Loading...