INSTRUCTION
MANUAL
Rocking Glider Bench
Ver. 2
SKY3478
NOTICE
• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
• Be aware that some parts are heavy and have sharp edges.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future reference.
TOOLS REQUIRED
LBS
ALLEN WRENCH
(PROVIDED)
WRENCH
(PROVIDED)
350 LBS
CAPACITY
1 PERSON
ASSEMBLY
APPROXIMATELY
45 MIN.
ASSEMBLY
HARDWARE
1
5
9
2 |
M6 x 20mm
SCREW
2 PCS
M6 x 60mm
BOLT
2 PCS
CONCAVE
WASHER
2 PCS
M6 x 35mm
2
SCREW
6 PCS
SPACER WASHER
6
8 PCS
END CAP NUT CAP
10
22 PCS
3
7
11
M6 x 40mm
BOLT
6 PCS
36 PCS
14 PCS
4
8
M6 x 55mm
BOLT
6 PCS
M6 NUT
14 PCS
PARTS
A
D1
F
LEGS
2 PCS
RIGHT SIDE
1 PC
SEAT
B
GLIDER SUPPORT
D2
LEFT SIDE
2 PCS
1 PC
C
GLIDER FRAME
E
BACKREST
2 PCS
1 PC
1 PC
| 3
PRODUCT ASSEMBLY
Attach a part B glider support to two part
A legs with four part 3 bolts, eight part 7
1
washers, and four part 8 nuts.
8
x4
B
x8
x2
A
Attach another part B glider support to the legs with two part 3 bolts, four part 7 washers,
2
and two part 8 nuts.
7
3
x4
4 |
7
8
x4
x2
B
3
x2
PRODUCT ASSEMBLY
Attach a part C glider frame with two part 4 bolts, four
part 7 washers, two part 6 spacers, and two part 8 nuts.
3
C
x2
4
Attach another part C glider frame with two
4
part 5 bolts, four part 7 washers, two part 6
spacers, and two part 8 nuts.
NOTE: Place ten part 10 end caps and ten
part 11 nut caps on exposed hardware.
8
x2
6
x2
7
6
x4
7
x2
x4
5
x2
C
8
x2
10
x10
11
x10
| 5
PRODUCT ASSEMBLY
Attach the back of the part F seat to part D1 right side and part
D2 left side with two part 2 screws and two part 7 washers.
5
Attach the front of the seat with two part 1 screws, two part 7
washers, and two part 9 concave washers.
2
D
1
D
x4
7
x2
2
Attach the part E backrest with four part 2 screws and four part 7 washers.
6
Place eight part 10 end caps on exposed hardware.
x2
1
F
9
x2
6 |
10
x8
7
2
E
x4
x4
PRODUCT ASSEMBLY
Attach the glider assembly to the seat sides with four part 4 bolts, eight part 7 washers, four
part 6 spacers, and four part 8 nuts.
7
NOTE: Place four part 10 end caps and four part 11 nut caps on exposed hardware.
10
x4
4
x4
7
x8
6
11
x4
x4
8
x4
| 7
HELP CENTER
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!
Product InquiryChat Support
Orders FAQ
Product Assembly
Returns & Refunds
PRODUCT WARRANTY INFORMATION
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
Loading...