B+B SmartWorx ESWGP206-2SFP-T User Manual

ESWGP206‐2SFP‐T

User Manual

International Headquarters

B+B SmartWorx.

707 Dayton Road

Ottawa, IL 61350 USA

Phone [phone] -- General Fax [phone]

Website: www.imcnetworks.com

Oranmore, Co. Galway, Ireland

Phone [phone] -- Fax [phone]

[e-mail]

European Headquarters

B+B SmartWorx

Westlink Commercial Park

Document: ESWGP206‐2SFP‐T_3515m

2

CONTENTS

Figures ........................................................................................................................................................................... 4

Tables ............................................................................................................................................................................. 4

Radio Frequency Interference Statement ..................................................................................................................... 5

Warranty ........................................................................................................................................................................ 6

Contents of Package ...................................................................................................................................................... 7

Product Description ....................................................................................................................................................... 8

Features ..................................................................................................................................................................... 8

Hardware ....................................................................................................................................................................... 9

LED Description .......................................................................................................................................................... 9

POE RESET .................................................................................................................................................................. 9

Din Rail Mounting .................................................................................................................................................... 10

Panel Mounting ....................................................................................................................................................... 10

RJ45 ETHERNET Connection .................................................................................................................................... 11

Pin Assignments ....................................................................................................................................................... 12

SFP Installation and Connection .................................................................................................................................. 13

Power Input Connections ........................................................................................................................................ 14

Specifications ............................................................................................................................................................... 15

Compliance and Disposal ............................................................................................................................................. 17

Dimensional Drawing ................................................................................................................................................... 18

B+B SmartWorx Technical Support .............................................................................................................................. 19

3

FIGURES

Figure 1. PoE reset ......................................................................................................................................................... 9

Figure 2. Din rail mounting .......................................................................................................................................... 10

Figure 3. Panel mounting ............................................................................................................................................. 10

Figure 4. Ethernet connection ..................................................................................................................................... 11

Figure 5. Ethernet connection ..................................................................................................................................... 12

Figure 6. Triangle Mark ................................................................................................................................................ 13

Figure 7. LC Connector to the Transceiver................................................................................................................... 14

Figure 8. Power Input Connections ............................................................................................................................. 14

Figure 9: Dimensional drawing .................................................................................................................................... 18

TABLES

Table 1. LED description ................................................................................................................................................ 9

Table 2. Pin assignments ............................................................................................................................................. 12

Table 3. Specifications ................................................................................................................................................. 15

Table 4. Certifications .................................................................................................................................................. 16

4

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which the user will be required to correct the interference at his own expense.

Any changes or modifications not expressly approved by the manufacturer could void the user's authority
to operate the equipment.

The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits. This digital apparatus does
not exceed the Class A limits for radio noise emission from digital apparatus set out in the Radio Interference
Regulation of the Canadian Department of Communications.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par le
ministère des Communications du Canada.

5

WA RRANTY

Effective for products of B+B SmartWorx shipped on or after May 1, 2013, B+B SmartWorx warrants that
each such product shall be free from defects in material and workmanship for its lifetime. This limited
lifetime warranty is applicable solely to the original user and is not transferable. This warranty is expressly
conditioned upon proper storage, installation, connection, operation and maintenance of products in accordance
with their written specifications.

Pursuant to the warranty, within the warranty period, B+B SmartWorx, at its option will:

1. Replace the product with a functional equivalent;

2. Repair the product;

3. Provide a partial refund of purchase price based on a depreciated value.

Products of other manufacturers sold by B+B SmartWorx are not subject to any warranty
or indemnity offered by B+B SmartWorx, but may be subject to the warranties of the other manufacturers.
Power supplies are limited to a six year warranty.

Notwithstanding the foregoing, under no circumstances shall B+B SmartWorx have any warranty obligations
or any other liability for: (i) any defects resulting from wear and tear, accident, improper use by the buyer or use
by any third party except in accordance with the written instructions or advice of the B+B SmartWorx or
the manufacturer of the products, including without limitation surge and over voltage conditions that exceed
specified ratings, (ii) any products which have been adjusted, modified or repaired by any party other than
B+B SmartWorx or (iii) any descriptions, illustrations, figures as to performance, drawings and particulars of
weights and dimensions contained in the B+B SmartWorx catalogs, price lists, marketing materials or elsewhere
since they are merely intended to represent a general idea of the products and do not form part of this price quote
and do not constitute a warranty of any kind, whether express or implied, as to any of the B+B
SmartWorx products.

THE REPAIR OR REPLACEMENT OF THE DEFECTIVE ITEMS IN ACCORDANCE WITH THE EXPRESS WARRANTY SET
FORTH ABOVE IS B+B SMARTWORX SOLE OBLIGATION UNDER THIS WARRANTY. THE WARRANTY CONTAINED IN
THIS SECTION SHALL EXTEND TO THE ORIGINAL USER ONLY, IS IN LIEU OF ANY AND ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, AND ALL SUCH WARRANTIES AND INDEMNITIES ARE EXPRESSLY DISCLAIMED, INCLUDING
WITHOUT LIMITATION (I) THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND OF
MERCHANTABILITY AND (II) ANY WARRANTY THAT THE PRODUCTS ARE DO NOT INFRINGE OR VIOLATE THE
INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL B+B SMARTWORX BE LIABLE FOR
LOSS OF BUSINESS, LOSS OF USE OR OF DATA INTERRUPTION OF BUSINESS, LOST PROFITS OR GOODWILL OR
OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES B+B SMARTWORX SHALL DISREGARD
AND NOT BE BOUND BY ANY REPRESENTATIONS, WARRANTIES OR INDEMNITIES MADE BY ANY OTHER PERSON,
INCLUDING WITHOUT LIMITATION EMPLOYEES, DISTRIBUTORS, RESELLERS OR DEALERS OF B+B SMARTWORX
WHICH ARE INCONSISTENT WITH THE WARRANTY, SET FORTH ABOVE.

6

CONTENTS OF PACKAGE

The package includes:

• B+B Ethernet switch with attached DIN rail clip

• Printed Quick Start Guide

• 4-panel mounting clips with screws

You may download the user manual at any time from the B+B SmartWorx/IMC Networks web site:

www.imcnetworks.com

7

PRODUCT DESCRIPTION

The ESWGP206-2SFP-T is a plug-and-play, POE+, unmanaged, industrial Ethernet Switches with IP30 protection. It
provides four 10/100/1000Mbps copper ports and two SFP ports for 1000Mbps speed. The fiber SFP port (Port #6)
can accommodate both Single-mode and Multi-mode fiber. The SFP port (Port #5) supports 10/100/1000 or
1000Mbps copper SFPs and gigabit fiber SFPs, for both Single-mode and Multi-mode fiber. This switch supports
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100BaseTX and 100BaseFX. It is both DIN rail mountable and panel
mountable.

The ESWGP206‐2SFP‐T supports IEEE802.3x for flow control, full and half duplex, and provides Auto Cross for the
copper ports. Each 10/100/1000Mbps port supports auto negotiation and is 802.af/at compliant for POE/ POE+.
As a POE product, it supports detect legacy/pre-standard PD devices. It also provides PD real-time protection
through the following mechanisms: overload, under-load, over-voltage, over-temperature, and short-circuit. It
supports up to 9720 byte jumbo frames

The ESWGP206‐2SFP‐T accepts 24-52VDC input voltage with dual power input using terminal blocks. The operating
temperature range is -40˚C to 85˚C (Wide Temperature Type) with an ambient relative humidity rating of 5 to 95%
(Non- condensing).

FEAT U R E S

• 10/100/1000Base-T Auto-Negotiation

• IEEE802.3af and IEEE802.3at, including two-event classification

• Supports legacy PD devices

• Unmanaged, Plug and Play

• Full and Half Duplex

• Auto Cross feature for the RJ-45 copper port

• Four 10/100/1000 copper POE+ ports

• Two SFP ports

• Each POE+ port supports a maximum of 30W power for a PD device

• PoE+ Reset function: included HW reset PoE and auto detect SFP uplink port status to detect

shut down PoE function or not, set by DIP switch

• IP30 metal enclosure

• Din-rail mount, panel mount

• Redundant dual VDC power inputs, 24 – 52 VDC

• Max Power Consumption 130W

• UL standard for safety of industrial control equipment (IEC/UL/EN)

• Shock, vibration, and freefall

• MAC address capability: 4K

• Broadcast Storm Protection: disabled

• Operation Temperature:-40˚C to 85˚C

8

HARDWARE

LED

Status

Description

PWR (P1, P2)

Green On

Power Applied

STA

Green Flashing

System State

LNK LED
Green On

Link established

Green Flashing

Data is being transmitted

SPD LED

Green On

1000 Mbps

Orange On

100 Mbps

Off

10 Mbps

MAX LED

Green On

POE Power over max load

POE+(1/2/3/4)

Green On

POE port providing power

L1/L2
Green On

Link established

Green Flashing

Optical link’s data transmitted

LED DESCRIPTION

Table 1. LED description

POE RESET

Figure 1. PoE reset

There are two PoE DIP Switches: one for a Hardware Reset (HW RESET) and one for an Auto Reset (AUTO RESET).

Hardware Reset: when the DIP Switch #1 is set to the ON position, the PoE function will be turned off, and the
power sourcing for a PD device is unavailable. However, the port can still provide an Ethernet connection to any
device not requiring Power over Ethernet.

Auto Reset: when DIP Switch #2 is set to the ON position, the PoE reset function is enabled. This supports a reset
of the remote PD device. The real advantage is not requiring someone to go to the remote site to reset the switch.
If both SFP port’s LEDs show a link down condition, the PoE function (power sourcing) will be disabled to save
power. If at least one of the SFP ports has an active link, the PoE function will work. If DIP Switch #2 is set to OFF,
the Auto Reset function is disabled and cannot save power under link down conditions for the SFP ports.

9

DIN RAI L M OUNT ING

The DIN rail mounting clips are connected to the switch when shipped and are ready to be mounted on
a 35mm size DIN rail.

Figure 2. Din rail mounting

PANE L MOUNTING

Figure 3. Panel mounting

10

RJ4 5 ETHERNET CONNECTION

All copper ports on the switch support the Auto Cross feature, which allows the end user to use a
Straight-through or Crossover cable.

Figure 4. Ethernet connection

11

Figure 5. Ethernet connection

PIN#

Signal Direction
10/100M

PoE & PoE+ Pinout
(ALT-A)

1

Out*

V+

2

Out*

V+ 3 IN*

V- 4 5

6

IN*

V-

7

8

PIN AS S IGNM ENT S

Table 2. Pin assignments

12

SF P INSTALLATION AND CONNEC TION

To connect the transceiver and fiber cable, follow the steps below. The SFP port is not proprietary. Any
MSA-compliant 1000Mbps fiber SFP can be installed in the port. (Note: SFP modules typically offer an LC
fiber connector). One of the SFP ports allows fiber SFPs only, please refer to information in the
Specification table.

First, insert the SFP transceiver into the SFP module cage. Notice that the triangle mark is at the bottom
of the module.

Figure 6. Triangle Mark

Next, insert the fiber cable into the transceiver.

13

Figure 7. LC Connector to the Transceiver

Last, remove the SFP and gently pull out of the cage manually.

POWER INPUT CONNE C TIONS

ESWGP206-2SFP-T accepts 24V~52VDC input voltage using terminal blocks.

Figure 8. Power Input Connections

14

SP E C IFICATIONS

Technology

Standard

IEEE802.3, 802.3u, 802.3x, 802.3z, 802.3ab, 802.3af/at

Processing Type

Store and forward

Broadcast Storm

Disabled

Flow Control

Full Duplex Flow Control, Half Duplex Back Pressure Control

Protocols

CSMA/CD (Carrier Sense Multiple Access/Collision Detect)

Switch Properties

MAC Table Size

4K

Packet Buffer Size

128K

Jumbo Frame Size

Supports up to 9720 bytes

Interface

RJ-45 Port

Auto-negotiation 10/100/1000Base-T, Full/Half Duplex, Auto-MDI/MDIX

SFP Ports

SFP form factor for MSA-compliant Gigabit SFPs
(Port #5: Copper or Fiber, Port#6: Fiber)

PoE+ Pinout

V+, V+, V-, V-, for pin 1,2,3,6

LED Indicators

P1, P2, 10/100/1000Mbps, POE+ (1~4)

DIP Switches

PoE reset on SFP down - ON/OFF

Power Requirements

Input Voltage

25 to 52VDC redundant power inputs

Power Budget

130W MAX

Input Connection

Standard 4-pin terminal block

Physical Characteristics

Case

Slim Metal Case, IP30 Design

Dimensions

4.5x14.5 x10.8cm (1.77 x 5.70 x 4.25in)

Installation

DIN Rail or Panel Mounting

Environment Limits

Operating Temp

- 40 to 85˚C

Storage Temp

-40 to 85˚C

Ambient Relative
Humidity

5 to 95%(Non-condensing)
UL Safety Temp

0 to 40˚C

Table 3. Specifications

15

Certifications

Safety

IEC/UL/EN60950-1

EMI

CE, FCC Part 15, EN55022: Class A
CE EN61000-6-4 (Industrial)

EMS

CE EN61000-4-2 (ESD)
CE EN61000-4-3 (RS)
CE EN61000-4-4 (EFT)
CE EN61000-4-5 (Surge)
CE EN61000-4-6 (CS)
CE EN61000-4-8
CE EN61000-4-11
CE EN61000-6-2 (Industrial)

Free Fall

IEC60068-2-32

Shock

IEC60068-2-27

Vibration

IEC60068-2-6

RoHS, REACH, WEEE

UL/CUL

Listed to Safety of Information Technology Equipment, including Electrical Business Equipment.
(Pending)

CE

The products described herein comply with the Council Directive on Electromagnetic Compatibility
(2004/108/EC) and the Council Directive on Electrical Equipment Designed for use within Certain
Voltage Limits (2006/95/EC). Will be certified for Information Technology Equipment including
Electrical Business Equipment (Pending).

UL 60950

*The product Ethernet network should be connected a Network Environment 0 which need to
comply the following conditions:

1). The function of the ITE being investigated to IEC 60950-1 is considered not likely to require
connection to an Ethernet network with outside plant routing, including campus environment.

2).The installation instructions clearly state that the ITE is to be connected only to PoE networks
without routing to the outside plant.

Table 4. Certifications

16

COMP L I ANCE AND DISPOSAL

The products described here in comply with the Council Directive on Electromagnetic
Compatibility (2004/108/EC) and the Council Directive on Electrical Equipment
Designed for use within Certain Voltage Limits (2006/95/EC). Will be certified for
Information Technology Equipment including Electrical Business Equipment (Pending).

European Directive 2002/96/EC (WEEE) requires that any equipment that bears this symbol
on product or packaging must not be disposed of with unsorted municipal waste. This symbol
Indicates that the equipment should be disposed of separately from regular household waste. It is
The consumer's responsibility to dispose of this and all equipment so marked through designated
Collection facilities appointed by government or local authorities. Following these steps through
Proper disposal and recycling will help prevent potential negative consequences to the environment
And human health. For more detailed information about proper disposal, please contact local
authorities, waste disposal services, or the point of purchase for this equipment.

17

DIMENSIONAL DRAWING

Figure 9: Dimensional drawing

18

B+B SMARTWORX TECHNICAL SUPPORT

Phone: [phone]

(Monday - Friday, 7 a.m. to 5:30 p.m. CST)

Fax: [phone]
Email: [e-mail]
Web: www.imcnetworks.com

19