BBPOS SIMPLYPRINT User Manual

Index
Quick Start Guide
SimplyPrint
Mobile bluetooth printer
Support Operating System:
Paper Feeding Button
TM
Bluetooth Pairing Button
Power ON/ OFF Button
LED Indicators
Printer Cover
Package included
Device – SimplyPrint Bluetooth Printer x 1
i.
Thermal Paper Roll (Diameter: 30 mm maximum) x 1
ii.
Metal Belt Clip x 1 and Screw x 1
iii.
USB Cable x 1
iv.
DC Adaptor x 1
v.
LED Indicators:
Power ON - green light ON
Battery Status
Micro USB port
Metal Belt Clip
Screw of Belt Clip
Thermal Printer Head
• Lo-Battery - red light FLASHING
• Charging - red light ON
• Fully Charged - green light ON
Bluetooth Status
• Pairing - blue light FLASHING
• Paired - blue light ON
• Error: (cover opened/ no paper)- red light FLASHING
IMPORTANT: Please fully charge the printer before first use. Please recharge the printer again when the printer is not in use for a long period of time, since battery will slowly discharge. We recommend user to turn off the printer when it is not in use. If the printer is operated at low temperature, the battery performance will temporarily decline. Please remember to fully and frequently charge the printer.
STEP 1:
Use the provided USB cable to fully charge the SimplyPrint before first use (fig. 1).
STEP 2:
A. Insert the paper roll in the compartment (fig. 2).
B. Ensure to close the cover tightly and properly. Otherwise, the error red light will be FLASHING after the device is powered on (fig. 3).
A
fig. 2
fig. 1
B
fig. 3
Quick Start Guide
STEP 3:
A. Press & hold button once, then the green LED will turn on (fig. 4).
B. Press & hold button for paper feeding.
STEP 4:
A. Connecting device using Bluetooth 2.1 -
press & hold button until blue light flashes to start the pairing mode (fig. 5).
B. Connecting iOS devices using BLE - the printer will automatically start the searching proces after printer is powered on.
Connect the printer from the scanned device list of your smartphone/ tablet, then, the blue light will be ON continuously and is ready for use.
When the device is low powered, the red light will be flashing. Please connect the USB power to recharge the printer and the red light will be ON when charging. After the printer is fully-charged, the green light will be ON (fig. 6).
fig. 4
fig. 5
fig. 6
Specifications ImportantSpecifications & Important
Buttons
Communication Interface
Thermal Printer
- Printing method
- Printable dots per line
- Resolution
- Dot pitch
- Print Speed
- Paper Specificaitons
- Effective Printing Width
- Paper Roll Diameter
- Sensor
LED indicator
Power & Battery
Charging
Power on/off button, bluetooth pairing button & paper feeding button
Bluetooth 4.0 /BLE
Thermal dot line printing
384 dots
Width 8 dots/mm x Height 16 dots/ mm (WxH)
Horizontal: 0.125 mm, Vertical: 0.125 mm
50 mm/ sec
Width: 58 mm/ 2 inch, Material: 58g thermal paper, Paper lengtj: 7 (+/- 0.2m)
48 mm
Maximum 30 mm
Paper end & Cover open sensor, low battery sensor
4 LEDs: Power On, Charging/ Low Battery status, Bluetooth status, Error
Lithium-ion rechargeable battery 2200 mAh, 3.7V
Via micro USB, 3.5 hours to be fully charged
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Software Support
Certifications
Dimensions
Weight
0°C – 45°C (32°F – 113°F)
Maximum 95%
-20°C – 45°C (-4°F – 113°F)
Maximum 95%
Android 2.1 or above, iOS 4.3 or above, Windows Phone 8, Windows 8
CE, FCC, RoHS
79.2 x 104.8 x 51.8 mm (approx.)
3.12 x 4.13 x 2.04 inches (approx.)
Main unit - 226 g (approx.), Thermal paper - 28 g (approx.)
CAUTIONS:
Don’t drop or use any hard object to hit the product. Don’t open the cover when the
1. product is in printing mode. Before you open the cover, please ensure the product stop printing. Turn off the printer if you are not using the product.
Don’t pull out the paper when the cover is closed. Please ensure that the paper roll is
2. placed properly before the cover is closed. Don’t use metal objects, sandpaper or sharp tools to touch the heating element and driver IC. Don’t touch the thermal head heating element, which may affect printing quality.
Don’t open or disassemble the product, which will void product warranty and may
3. damage the product. Don’t operate the product when there is moisture (caused by condensation) on the front surface of thermal head.
Don’t feed wrong sized thermal paper or paper containing (Na+,K+, Cl-). It may affect
4. printing quality and life of the thermal head. Please use the thermal paper which complies with specific requirements/ specifications. Place the product or thermal paper in a cool, dry and dark location.
Don’t let plastic film, eraser or adhesive tape be in contact with the thermal paper for a
5. long period of time.
6.
Don’t use chemical glue on the thermal paper. It is not recommended to use the thermal paper stored for a long period of time.
7.
The printer has built-in lithium-ion battery. Since the requirements of disposal of batteries vary from country to country, please refer to the appropriate disposal method of your country.
8.
This device contains small parts (screw of the metal belt clip). Please keep the device out of children's reach. If the small part is swallowed, please consult your physician immediately.
Don't immerse the device into water. This device is not water-proof or weather-proof.
9. Don't put it close to the sink or dish washer. Don't clean it with water or corrosive solvent. Clean the device by using dry cloth only. Don't drop, tear or disassemble the device improperly, any misuse or improper use which will void the product warranty. Contact your dealer when your device malfunctions.
©IOS is the trademark of Apple Inc. Android™ is a trademark of Google Inc. All details are subject to change without prior notice.
Loading...
+ 1 hidden pages