BBPOS QB21 User Manual

Package Contents
Quick Start Procedures
Intuit QB21
Bluetooth® Magstripe and EMV Card Reader
Support Operating System:
iOS, Android, Windows Phone 8, MS Windows
Index & Accessories (Fig.1)
For magstripe card reading
Power button
LED Light
Lanyard holder
reset button
Micro USB port for charging operation
Device X1 USB cable X1 Lanyard X1 Quick start guide X1
Application Download & Installation
This device can support iOS (iOS 6.0 or above), Android (Android 2.1 or above), Windows Phone 8 & MS Windows.
1. Please visit APP Store or Google Play Store to download the ocial application before operation .
2. Please follow APP instructions to register and login for proper operation.
3. For any questions, please contact the ocial application developer.
Quick Start Procedures
STEP 1
Download the ocial application from APP Store or Google Play Store.
Connect Micro USB charging cable to charge the device as shown to the right.
** Intuit QB21 is powered by an internal Lithium Polymer rechargeable battery pack that cannot be removed or replaced. Before first use, charging is required for approximately two to three hours. To prevent potential electrical damage to the Intuit QB21, please be recommended to use the Micro USB cable provided with the packaging only.**
APP
DOWNLOAD
STEP 2
Turn on the device pairing function of
smartphone/tablet. Then, press
your
“ ” to turn on the Intuit QB21.
**Please ensure that Bluetooth® function of your smartphone/tablet is ON before device pairing.
Bluetooth
ON
STEP 3
Select Intuit QB21 in the Scanned Device List on your smartphone/tablet. Then,
your Intuit QB21 is connected and green LED will ON.
Scanned
Device List
STEP 4
You can follow your application instruction to start the transaction
process, then swipe/insert card to complete the transaction.
**If your Intuit QB21 cannot be successfully paired with your device, please access the Setting screen on your phone to choose “Intuit QB21” in device list to pair accordingly.**
Cautions & Important Notes
• Ensure to turn on the Blue
• Please fully charge your Intuit QB21 before use.
• Please ensure magstripe/EMV chip of the card is facing the right direction when swiping or inserting card.
• Don’t drop, disassemble, tear, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign object into the device. Doing any of which will void the Warranty.
• Don’t immerse the device into water and place near washbasins or any wet locations. Don’t spill any food or liquid on the device. Don’t attempt to dry the device with external heat sources, such as microwave or hair dryer.
• Don’t use any corrosive solvent or water to clean the device. Recommend using dry cloth to clean the surface only.
• Don’t use any sharp tools to point the internal components or connectors, doing which may lead to malfunction and void the Warranty.
• Don’t try to disassemble the device to repair. Please contact your dealer for repair and maintenance.
tooth® function of your smartphone or tablet before use.
Product Specications
Functions
Communication Interface
Power & Battery
Charging
Swipe Speed
LED Indicator
Support Operating System
Product Size
Product Weight
Operating Temperature
Operating Humidity
Storage Temperature -20°C – 55°C (-4°F – 131°F)
Storage Humidity Max 95%
• EMV/PBOC Chip Card Reader (ISO 7816 Compliant Class A, B, C card)
• Magnetic Stripe Card Reader Dual tracks (track 1 & 2 or track 2 & 3) Bluetooth® 4.0 Lithium polymer rechargeable battery 125mAH, 3.7V
Via micro USB 15cm - 100cm/sec Operating – green light flashing Low battery level – red light flashing Charging – red light ON Fully charged – green light ON Android 2.1 or above, iOS 6.0 or above Windows Phone 8, MS Windows
61.8mm (W) x 44.5mm (H) x 14.2mm (D)
29.8g 0°C – 45°C (32°F – 113°F) Max 95%
Troubleshooting FCC Caution Statements:
Problems Recommendations
Device cannot be paired
Device cannot read your card successfully
Device lost the connection with your smartphone or tablet when the device is auto-o.
Device does not work with your phone or tablet
Device cannot read your card successfully
Device has no response
• Please press the power on button to restart your device.
• Please check if you can nd the device’s “Serial Number” (Shown on the back of device) in the “Scanned Device List” of your smartphone or tablet.
• Please press the power on button to turn on the device again. The device will automatically connect with your smartphone or tablet again.
• The device may be at lower battery level, please use the USB cable to recharge it, then retry.
• Please ensure the device or smartphone/tablet is within the reception range.
• Please press the power on button to turn on the device again. The device will automatically connect with your smartphone or tablet again.
• The device may be at lower battery level, please use the USB cable to recharge it, then retry.
• Please ensure the device or smartphone/tablet is within the reception range.
• Please ensure the Bluetooth® function of your smartphone or tablet is turned on.
• Please check the version of your operating system is supported for this device’s operation.
• Please check if the device has power when operating and ensure devices are connected.
• Please check if the application instructs to swipe or insert card.
• Please ensure there is no obstacle in the card slots.
• Please check if the magstripe or chip of the card is facing the right direction when swiping or inserting card.
• Please ensure your phone/tablet is supported model for this device’s operation.
• Please swipe or insert card with a more constant speed.
• Please use a paper clip to press the reset button at the bottom for reboot.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Warranty
• Any damage or defects caused by a failure to follow the instruction which relate to this device or as the result of an accident, abuse, misuse, misapplication, product modication, improper voltage or current, acts of God, shipping damages or loss, or damage caused by service performed by anyone other than our company are expressly excluded from the warranty stated below.
• We are not under any obligation to support the device for all operating environments, including but not limited to, interoperability with all current and/or future versions of software or hardware.
• Please contact the dealer for any warranty or customer support services.
Loading...