BBK Performance 17110 User Manual

2003 Cobra – 17050, 17110

INS-082

INSTALLATION INSTRUCTIONS

www.BBKPERFORMANCE.com

IMPORTANT—All appropriate safety equipment (e.i., gloves, tools) must be used during the installation of this product(s).
BBK Performance, Inc. accepts no responsibility for injuries resulting in the installation of any product(s).

1/16" DIA. HOLE
1/8" UP FROM BOTTOM OF
BRACKET CENTERED BETWEEN
THE CABLE OPENINGS

THROTTLE CABLE OPENING

CRUISE CONTROL CABLE OPENING

Step 1

2003 SC Cobra installations require an additional supplied return spring. In order to mount
the spring, a small hole must be drilled into the the throttle cable bracket to attach the fixed
end of the spring while the other end will attach to the floating bushing on the throttle cable
arm on the BBK throttle body.

Step 2

Diagram shows the approximate location and diameter of the hole required.

Step 3

Bracket removal is not necessary. Drill the hole while the stock throttle body is removed to
allow access with drill.