BBK LD2216K Service manual

LD2216K(RU)
Service Manual
Model version:V1B1V2.00/2.10 V1B2V2.00/2.10
Catalog
Chapter One About Maintenance
1.1 Safety precautions
1.1.1 Power supply
1.1.3 Precautions for display screen
1.1.4 Precautions for laser head
1.1.5 About placement position
1.2 Maintenance method
1.2.1 Electric resistance method
1.2.2 Voltage method
1.2.3 Current method
1.2.4 Element substitution method
1.2.5 Cutting method
1.2.6 Visualized method
1.2.7 Comparison method
1
1
1
1
1
2
2
2
2
2
2
2
2
3
3
1.3 Required device for maintenance
Chapter Two Functions and Operation Instructions
2.1 Section One TV Segment
2.1.1 Features
2.1.2 Set list
2.1.3 Controls and functions
2.1.4 Connection and starting
2.1.5TV mode
2.1.6 PC monitor mode
2.2 Section Two DVD Segment
2.2.1 Controls and functions
2.2.2 Function settings
3
4
4
4
5
5
7
7
9
10
10
10
15
2.2.3 Others
Chapter Three Principle and Servicing
The previous manual: TV part
Section One Principle of the player
3.1.1 Wiring Diagram
Overall block diagram
3.1.2
3.1.3
System control/signal processor block diagram
3.1.4 Audio
block diagram
3.1.5 Video block diagram
3.1.6 Power line block diagram
Section Two
Section Three
The next manual: DVD part
Section One Principle of the player
Troubleshooting flow chart
Waveform diagram
13
15
15
15
15
16
17
18
19
20
21
29
37
37
3.1.1 Audio circuit
3.1.2 Video circuit
3.1.3 Servo circuit
3.1.4 USB/KEY circuit
3.1.5 Decode circuit
Section Two Troubleshooting flow chart
Section Three
Chapter Four Explosion Flow Chart
Chapter Cinque PCB board & Circuit diagram
Section One PCB Board
Section Two Circuit diagram
Chapter Six BOM List
Waveform diagram
37
37
38
38
39
40
41
51
53
53
61
81
Chapter One About Maintenance
1.1 Safety precautions
1.1.1 Power supply
When maintenance personnel are repairing DVD TV, he should pay special attention to the power
with 220V 800V AC and 330V DC which will cause hurt and damage to persons!
1.1.2 Precautions for antistatic
Movement and friction will both bring static electricity which causes serious damages to integrated
IC. Though static charge is little, when a limited quantity of electric charge is added to large
scaleintegrated IC, as the capacitance is very small in the meantime, now the integrated IC is very much
easy to be struck through by static electricity or the performance will decrease. Thus static electricity
prevention is of extraordinary importance. The following are several measures to prevent static
electricity:
1. Use a piece of electric conduction metal with the length of about 2 metres to insert into the earth,
and Fetch the lead wire from the top of the surplus metal and connect to the required static electricity
device. The length and depth of the metal embedded under the earth should be determined according to
the wettability of the local soil. For humid places, it may be shorter, and longer and deeper for dry places.
If possible, it can be distributed and layed in terms of “#” shape.
2. On operating table-board, the antistatic table cushion should be covered and grounded.
3. All devices and equipments should be placed on the antistatic table cushion and grounded.
4. Maintenance personnel should wear antistatic wrist ring which should be grounded.
5. Places around the operating position should also be covered with electric conduction cushion or
Painted with antistatic paint.
1.1.3 Precautions for display screen
1. Display screen is breakable article, so please protect carefully when carrying and prevent fingers
or hard objects striking the screen to damage structure of the screen.
2. When cleaning screen, do not use organic chemicals. You should use cloth and use small
amount of special cleaning liquid in places difficult to clean.
- 1 -
1.1.4 Precautions for laser head
1. Do not stare at laser head directly, for laser emission will occur when laser head is working,
which will Hurt your eyes!
2. Do not use wiping water or alcohol to clean laser head, and you may use cotton swab.
1.1.5 About placement position
1. Never place TV in positions with high temperature and humidity.
2. Avoid placing near high magnetic fields, such as loudspeaker or magnet.
3. Positions for placement should be stable and secure.
1.2 Maintenance method
1.2.1 Electric resistance method
Set the multimeter in resistance position and test whether the numerical value of resistance of each
point in the circuit has difference from the normal value to judge the trouble spot. But in the circuit the
tested numerical value of resistance is not accurate, and the tested numerical value of integrated IC's
pins can only be used for reference, so the elements should be broken down for test.
1.2.2 Voltage method
Voltage method is relatively convenient, quick and accurate. Set the multimeter in voltage position
and test power supply voltage of the player and voltage of a certain point to judge the trouble spot
according to the tested voltage variation.
1.2.3 Current method
Set the multimeter in current position and test current of the player of a certain point to judge the
trouble spot. But when testing in current method, the multimeter should be series connected in the
circuit, which makes this method too trivial and troublesome, so it is less frequently used in reality.
1.2.4 Element substitution method
When some elements cannot be judged good or bad, substitution method may de adopted directly.
1.2.5 Cutting method
Cutting method should be combined with electric resistance method and voltage method to use.
This method is mainly used in phenomena of short circuit and current leakage of the circuit. When
cutting the input terminal voltage of a certain level, if voltage of the player rises again, it means that the
trouble lies in this level.
- 2 -
1.2.6 Visualized method
Directly view whether abnormalities of collision, lack of element, joint welding, shedding welding,
rosin joint, copper foil turning up, lead wire disconnection and elements burning up among pins of
Elements appear. Check power supply of the machine and then use hands to touch the casing of part of
elements and check whether they are hot to judge the trouble spot. You should pay more attention when
using this method to check in high voltage parts.
1.2.7 Comparison method
A same good PC board is usually used to test the correct voltage and waveform. Compared these
data with those tested through fault PC board, the cause of troubles may be found.
Through the above maintenance method, theoretical knowledge and maintenance experience, all
difficulties and troubles will be readily solved.
1.3 Required device for maintenance
Audio Generator
Digital oscillograph ( 100MHE)
SMD rework station
Multimeter
Soldering iron
Pointed-month pincers
Cutting nippers
Forceps
Electric screw driver
Terminals connecting cord
Headphone
Microphone
- 3 -
Chapter Two
Functions and Operation Instructions
2.1 Section One TV SEGMENT
2.1.1 Features
Technical Features
#High quality color TFT panel #Maximum resolution 1366x768 for LD2216K. #Built-in DVD player with Slot-in mechanism #Multisystem TV tuner with NICAM decoding #Biuilt-in stereo audio system #USB port to playback compatible files stored on flash memory of external devises #Composite video ,audio input #Component, RGB/SCART and VGA video inputs #Integrated HDMI/HDCP compliant receiver #Digital coaxial output for multi-channel sound playback #Headphones output #Universal holder for furniture or wall fixation with 270 rotation angle
TV Channels Receiving and External Signal Playback
#Automatic and fine tuning functions with 100 channels memory #Adjustable brightness, contrast, saturation, hue and 4 preset image settings #Tone and sound balance adjustment and 4 preset audio settings
Disc playback mode
#Digital video playback: DVD-Video, Super VCD, VCD compatibility #MPEG-4 standard support #Digital audio playback: CD-DA, and HDCD WMA compatibility #Digital graphic albums playback: Kodak Picture CD and JPEG #Compatible disc types: CD-R/CD-RW, DVD-R,/DVD-RW, DVD+R/DVD+RW
#Russia, Cls and Baltic States adaptation interface and filenames ID3-tags and CD-Text support
simplifies device operation #”Q-Play” function provides direct playback and allows to skip commercial that is not possible to rewind #”Browser” function provides easy access to playback control #Automatic screensaver function #Parental control function to protect children from watching inappropriate discs #Super wide range of operating power supplies(~100-240V) automatic short circuit protection
PC monitor mode
#Wide resolutions range #RGB setting and 4 presets of color temperature #Tone and sound balance adjustment and 4 preset audio settings #External audio signal playback.
- 4 -
2.1.2 Set list
LCD TV Remote Control AAA Battery RCA-RCA cord 2XRCA-2XRCA cord Power cable Microphone Microphone cable User manual Warranty Card Album with track list
2.1.3 CONTROLS AND FUNCTIONS
(1) Panel controls and indication
For LD2216k
1pcs 1pcs 2pcs 1pcs 1pcs 1pcs 2pcs 2pcs 1pcs 1pcs 1pcs
Left panel
SETUP button
1
Press to switch to setup mode
2
VOL+/-button
Press to adjust the volume.
3
CH+/-button
Press to switch between channels/to
choose menu item.
4
SOURCE button
Press to choose the playback mode.
5
STANDBY button
Press to switch on the device/into
standby mode.
6
Headphones output
Microphone input 1
7
Front panel
Remote control sensor
9
10
Power supply indicator
Right panel
11
USB port
12
PLAY/PAUSE button
Press to playback/pause.
13
STOP button
Press to stop the playback.
14
EJECT button
Press to open/close the disc tray.
15
Disc tray
16
POWER button
Turn on/off the power.
6
Microphone input 2
8
- 5 -
(2) Remote control general view
25
CH button
Press to switch between channels /to choose menu item.
26
MENU / button
DVD disk menu/PBC function/Press to return to the previous channel.
27
Q-PLAY button
Press to turn the Q-PLAY mode on.
28
KARAOKE button
Press to set karaoke function..
29
SUBT button
Press to change the subtitles language.
30
Button
Press to switch on the device/into standby mode.
1
EJECT button
Press to open/close the disc tray.
2
LANG button
Press to change language.
3
DISP button
Press to display the disc information.
NICAM button
4
Press to choose audio mode.
5
Numeric buttons
6
BROWSE button
Press to turn on/off the browser function.
CURSOR buttons (UP/ DOWN/ LEFT
7
/RIGHT) OK button
8
9
SETUP button
Press to switch to setup mode.
10
Button
Press to turn on/off the “Virtual Keyboard” function.
11
SOURCE button
Press to change the TV /DVD /AV/ SCART/ HDMI/VGA/ mode.
12
Button
Press to start rewind/rewind scanning.
13
Button
Press to skip backward.
14
REPEAT button
Press to repeat.
15
A-B button
Press to repeat the selected section.
16
Button
Press to turn on/off the sound.
17
VOLUME+/-button
Press to adjust the volume.
18
USB/DVD button
Press to select USB/DVD mode.
Button
19
Press to skip forward.
20
Button
Press to stop the playback.
21
Button
Press to forward scanning.
22
Button
Press to playback/pause.
ZOOM+/-button
23
Press to zoom in/out.
24
CANCEL button
Press to go one level back/cancel current operation.
- 6 -
2.1.4 CONNECTION AND STARTING
SELECT RETURN
ENTER
SETUP
(1 )Switching interfaces
For LD2216k
1
HDMI IN
2
AUDIO VIDEO IN
Used for external signal source
3
connection
COAXIAL OUT
Meant for multi-channel sound playback.
4
SCART socket
Meant for external audio video signal source connection. There is no need to
5
use additional audiocord.
PC AUDIO IN
Meant for PC stereo audio output
6
connection.
RF input
7
Meant for antenna connection.
VGA port
Meant for PC connection.
2.1.5 TV MODE
This LCD TV can store up to 100 channels and enables to scan channels thought automatic, manual and fine tuning scanning mode. Built-in TV tuner supports stereo audio playback in NICAM system.
(1) Adjusted channels selection
#Press +CH-buttons on the left panel or CH
buttons on the remote control each time, when you want to change a channel.
#Use numeric buttons to enter the number of the
channel.
#Press button to return to the previous
channel.
(2) Default picture settings
selection
#You may select one of the default picture
settings: USER, STANDARD, DYNAMIC and SOFT. #You may adjust necessary parameters in the
device menu.
#Turn to PICTURE item on this page for details.
(3) Default sound settings selection
#You may select one of the default sound
settings:
USER, MUSIC, FILM and NEWS. #You may adjust necessary parameters in the
device menu.
#Turn to SOUND item on this page for details.
(4 )Accompanying sound type #Only some of the TV channels have stereo
accompanying sound in NICAM system.
#Press NICAM button to select accompanying
sound.
(5 ) TV settings
#Press SETUP button to display the menu. #Use cursor buttons on the remote control or
+CH-buttons on the left panel to select the item. Use buttons to adjust selected parameter. Use OK button for confirmation. Press SETUP button again to return to the main menu or to exit TV SETUP.
(6) Picture
#Select PICTURE item to adjust picture
parameters.
#You may adjust BRIGHTNESS, CONTRAST,
SATURATION, TINT, SHARPNESS and COLOR TEMP.
- 7 -
NOTE:
You can’t adjust TINT while watching TV
channels.
(7) Sound
#Select SOUND item to adjust sound
parameters.
#You may adjust BALANCE, BASS, TREBLE
and NICAM. ATTENTION! We recommend watching TV at halfof maximum level of the sound. Continuous listening at higher level may lead to hearing reduction.
(8) TV setup
Select TV SETUP item to adjust channels. You may select CHANNEL, COLOR SYSTEM, SOUND SYSTEM, FINE TUNING, AUTO SEARCH, MANUAL SEARCH and CHANNEL EDIT.
#CHANNEL item enables to select the number of
adjustable channel.
#COLOR SYSTEM item can be changed
between: AUTO, PAL and SECAM. We
RETURN
SETUP
recommend to set this item to AUTO.
#SOUND SYSTEM item can be changed
between B/G, D/K, Land l.
#FINE TUNING item enables to adjust the
channel frequency accurately.
#MANUAL SEARCH item enables to scan
channels manaully.
#AUTO SEARCH item enables to adjust
channel setting automatically.
#CHANNEL EDIT submenu enables to
select,skip and swap, the channel.
#CHANNEL parameter enables to select current
channel.
#SKIP function enables to make current channel
inaccessible while using CH+/- button to browse channels.
#SWAP function enables to select the channel
number to swap with current channel.
#SAVE parameter enables to confirm the swap
function.
(9) OSD setup
You may select LANGUAGE, OSD H­POSITION, OSD V-POSITION, OSD DURATION and TRANSPARENCY.
#LANGUAGE item enables to select the OSD
language.
#OSD H-POSITION item enables to adjust OSD
horizontal position.
#OSD V-POSITION item enables to adjust OSD
vertical position.
#OSD DURATION item enables to adjust the
main menu display duration time.
#TRANSPARENCY item enables to adjust
transparency of OSD.
(10) Function
You may select SCALE, NOISE REDUCE,
SLEEP and RESET.
#SCALE item enables to switch the video format
between “FULL”, “ZOOM1”, “ZOOM2”, “NORMAL” and “PANORAMA”. Between “16:9” and “4:3”.
#NOISE REDUCE item enables to reduce the
noise of TV image. #SLEEP item enables to set the sleep time. #RESET item enables to reset all values to
default.
- 8 -
(11) Video settings
#Press SETUP button to display interrelated
setting menu.
#The setting menu in the external video signal
playback mode is much the same as that of TV MODE. It is not repeated here. You can refer to page 10 and 11.
NOTE
In external video signal playback mode TV
SETUP item is inaccessible.
2.1.6 PC MONITOR MODE
(1)Picture
Select PICTURE item to adjust picture
parameters.
You may adjust BRIGHTNESS, CONTRAST,
COLOR TEMPERARURE and AUTO CONFIG.
#Select COLOR TEMPERATURE subment to
adjust color temperature of the picture.
#COLOR TEMP. Item can be set to :USER,
NORMAL, WARM and COOL.
#RED, GREEN and BLUE items enables to
adjust RGB value of color temperature.
#Use AUTOCONFIG to configure display
parameters automatically.
NOTE:
The picture can be displayed incorrectly while
adjusting.
(3)Monitor setup
Select MONITOR SETUP item to adjust such parameters as H-POSITION ,V-POSITION, FREQUENCY and PHASE.
(4)OSD setup
Select OSD SETUP item to adjust LANGUAGE, OSD H-POSITION, OSD V­POSITION, OSD DURATION, TRANSPARENCY.
(5)Function
You may select SCALE, NOISE REDUCE,
SLEEP and RESET. #SCALE item enables to switch the video format
between “FULL”, “CENTER”.
#NOISE REDUCE item enables to reduce the
noise of TV image. #SLEEP item enables to set the sleep time. #RESET item enables to reset all values to
default.
(2)Sound
Select SOUND item to adjust sound
parameters.
You may adjust BALANCE, BASS, TREBLE
and NICAM.
- 9 -
2.2 Section Two DVD SEGMENT
2.2.1 Controls and functions
Front panel controls
For LD2216K
USB port
PLAY/PAUSE button
Press to playback/pause.
STOP button
Press to stop the playback.
EJECT button
Press to open/close the disc tray.
Disc tray
Note:
This model does not support the 8cm disc. Do not insert that type of disc into this device to avoid disc jam.
2.2.2 FUNCTION SETTINGS
(1) Function selection and
change
#Press the SETUP key to show the setup menu.
You will see the following image on the screen, as show on the figure:
#Select the desired menu item using the
UP/DOWN buttons button; press the OK key
for confirmation.
Language
Image
Sound
Playback
Karaoke
Preference
Parental control
Initial help
Reset settings
Exit
Setup menu
DVD menu
Sound track
Subtitle
Mp4 Subtitles
Off
1.For example, if you wish to change the image
settings, you have to select the image item and press the OK or RIGHT key.
4:3
Off.
+48
+48
4:3
AUTO
PAL
NTSC
M.
0
0
High
L.
Medium
Low
0
0
TV system
TV format
Sharpness
Gamma
Brightness
Contrast
Hue
Saturation
AUTO
2.Using the UP/DOWN buttons, select the desired item and press OK or RIGHT button. For example, select the Sharpness item. Settings will appear on the screen. Then select the desired sharpness level and press OK for confirmation.
3. Press LEFT for exit to previous menu level.
4. Press SETUP to exit setup menu.
TV system
TV format
Sharpness
Gamma
Brightness
Contrast
Hue
Saturation
AUTO
Off.
+48
+48
(2) Language settings
1. Setup menu: interface language set-up #Options: Russian, English, Ukrainian,
Romanian.
#Default option: English.
2.DVD menu: selection of disc menu language
3. Sound: selection of translation language #Disc menu/translation language options:
Russian, English, Estonian, Lithuanian, Kazakh, Romanian, Belarusian, Ukrainian, Chinese, Others.
#Default menu/translation language option:
English.
#Selection of other languages: select the
OTHERS item using the wheel and press OK. Enter the language code using the numeric buttons and press OK.
- 10 -
#If the language you selected is not recorded on the DVD disc, another available language will be used.
4. Subtitles: selection of subtitles language #Options: Off, Russian, English, Estonian,
Latvian, Kazakh, Romanian, Belarusian,
Ukrainian, and Chinese and Others. #Default option: off. #Selection of other languages: select the
OTHERS item using the wheel and press OK.
Enter the language code using numeric buttons
and press OK. #If the language you selected is not recorded on
the DVD disc, another available language will
be displayed.
5.MP4 Subtitles: selection of subtitles language #Options: Russian, English, Ukrainian and
Romanian. #Default option: English.
(3) Image settings menu
1. TV system: TV system selection #Options: Auto, PAL, NTSC. #Default option: PAL.
2.TV Format: image ratio settings #Options: 4:3 pan& scan, 4:3 letterbox and 16:9
TV. #Default option: 4:3 LB. #Some discs are recorded with support of only one ratio. The selected ratio must comply with the TV screen.
8.Saturation: adjustment of image saturation Adjustment of image brightness, contrast,
hues and saturation: #Select the desired item of the image adjustment
section using the UP/DOWN buttons. Press OK or RIGHT key to start adjusting the relevant
option. #Change the option value using the wheel. #Upon completion press the LEFT button of the
UP/DOWN buttons to return to image setup
menu.
(4) Sound settings menu
1.Digital audio output a).SPDIF format: set-up of digital audio output options. #Options: RAW, PCM. #Default options: RAW. #When you select the RAW option, the not
decoded signal is transferred to the LCD TV’s
digital outputs, the decoded signal is
transferred to analog outputs. Decoding is
performed by the built-in decoder of the LCD TV.
This feature is meant to ensure that signal
decoding at digital outputs is performed by an
external device(e.g.an amplifier). #If you select the PCM option, a PCM coded
signal will be transferred to the LCD Tv’s digital outputs.
Digital output
Tuning
SPDIF format
LPCM
RAW
48kHz
TV system
TV format
Sharpness
Gamma
Brightness
Contrast
Hue
Saturation
Auto
4:3 LB
Off.
AUTO
PAL
NTSC
L.
0
0
0
0
3.Sharpness: image sharpness adjustment #Options: High, Medium, Low. #Default option: Medium.
4. Gamma: adjustment of image color temperature #Options: High, Medium, Low, Off. #Default option: Off.
5.Brightness: adjustment of image brightness
6.contrast: adjustment of image contrast
7.Hues: adjustment of image hues
B)LPCM:set-up of digital audio output options to comply with different amplifiers and receivers. #Options: 48kHz 16 bit, 96 KHz 24 bit,192kHz 24
bit.
#Default option: 48kHz 16 bit.
2. Sound correction A)Equalizer: equalizer modes #Options: Off, rock, pop, live dance, techno, classics, soft. #Default option: off. B)Echo: echo effects #Options: Off, concert, living room, hall, Bathroom, cave, arena, church. #Default option: off. C)Tone balance: adjustment of tone balance level. #Adjust the tone balance level using the cursor
buttons. #Press the LEFT button to return to sound correction set-up menu.
- 11 -
(5) Playback settings
1. DVD Advertisement skip: skip the unskippable
block while playing a DVD disc. #Options: Yes, No. #Default option: Number
2. VCD/SVCD
PBS menu: PBC menu on/off #Options: On, Off. #Default option: On. #If On option is set, while reproducing discs, a
menu will appear, in which you can select the order of playing the disc content. If the Off option is set, the reproducing of content is performed in the order, in which it is recorded on the disc.
DVD
VCD/SVCD
Files
Repeat
All types
Advertisemenu No
off
3.Files: selection of reproduced files on the disc #Options: Audio, Pictures, Video, All types. #Default option: All types.
4.Repeat: file repeat mode #Options: Off, Single, All. #Default option: Off.
(6) Karaoke settings menu
1.Microphone: microphone on/off #Options: On, Off. #Default option: On.
2.Kar.help: karaoke -disc playback mode #Options: L Channel, R Channel, No ast, No voc. #Default option: No voc assist.
#Press LEFT key of the UP/DOWN buttons to
return to karaoke settings menu.
(7) Preference settings
1.Screensaver: screen saver on/off #Options: On, Off. #Default option: Off.
2.Gr.equalizer: spectrum analyzer #Options: On, Off. #Default option: Off.
Screen saver
Gr.equalizer
On
Off
On
Off
(8) Parental control settings
1.Category: set-up of age restrictions to prevent children from seeing undesirable discs. #Options: Any, Kid, G,PG, PG-13, PGR, R, NC-
17. #Default option: Any.
any
Kid
G
Allowed..
Set password
2.Change password: set-up of a four-digit password to change the level of age restrictions. #Default option: 7890
Any
PG
PG-13
PGR
R
NC-17
Microphone
Kar.Help
Volume
Echo
No ast.
On
On
Off
5
5
3.Volume: Microphone: microphone sound volume level
#Using the UP/DOWN buttons adjust the
microphone volume level.
#Press LEFT key of the UP/DOWN buttons to
return to karaoke settings menu.
4.Echo:echo level while playing the karaoke-disc #Adjust the echo level Using the UP/DOWN
buttons.
Old password
New password
Verify
OK
Cancel
(9) Initial setup menu
#Press the RIGHT key to enter the initial settings
menu, then select the desired item using the cursor buttons and press OK key for confirmation.
#While being in this menu section, you cannot
return to the previous level by pressing the LEFT key.
Auto
PAL
NTSC
- 12 -
(10) Reset settings to default
#Resetting all settings and restoring default
options, except age restrictions level and
Password.
Load factory settings
OK Cancel
(11) Exit settings menu
#Select the exit item using the UP/DOWN
buttons and press the OK key to exit the menu.
Language
Image
Sound
Playback
Preference
Parental control
Initial setup
Reset to defaults
Exit
2.2.3 OTHERS
(1) Useful notes
#To extend the service life of your LCD TV make pauses of not less than 30 seconds between switching
off and repeatedly switching on the LCD TV. #Disconnect the LCD TV from the wall outlet after shutdown. #Some LCD TV’S functions may not be applied to some discs. #Use supply sources of rated voltage, otherwise the LCD TV may not function or be damaged. #In case of the LCD TV’s occasional stops, please switch the power supply off and then on again.
(2)Trouble shooting Please check probable causes of malfunction before addressing the service center.
- 13 -
(3)Technical characteristics
#We are permanently improving the quality of our products; hence the product’s design, functionality
and technical characteristics may be modified without prior notice.
#We do not guarantee that all discs can be played smoothly due to the disc quality, disc recording
quality and recording format.
- 14 -
Chapter Three Principle and Servicing
Section One Principle of the player
3.1.1 Wiring Diagram.
Part One TV
D153D-3
4941455
USB
BOARD
DVD LOARD
2380370
DVD-PICK UP
TD-S208S-SV1(62SV1 pick-up)-B
USBP USBM GND GND DVD_+3.3V +5V SW1 SW2
GND LD-DVD NC +5V MDI LD-CD VRDVD VRCD NC E +5V V20 GND F B A RFO IOA D C TK­TK+ FC+ FC-
SL- SL+ LIMIT GND SP+ SP-
TROUT DISCEJT GND
+5V
TRIN GND
+5V
LOAD­LOAD+
1 2 3 4
CN1
5 6 7 8
24 23 22 21 20 19 18 17 16 15 14 13
CN29
12 11 10 9
DVDMAIN BOARD
8 7
2D153D-3
6 5 4
4941662
3 2 1
1 2 3
CN26
4 5 6
1 2
CN24
3
1 2
CN25
3 4
1
CN23
2
TV KEY BOARD
4153D-0
4941454
DVD_AL GND DVD_AR GNE DVD_CVBS GND DVD_Y GND DVD_PB GND DVD_PR GND DVDSTB DVDSDA DVDSCK GND IR GND OK_A MIC_DET
+12V +5V +5V GND GND GND DVD_SPDIF
KEY1 GND KEY2 STBY_KEY
1 2 3 4 5 6 7 8 9 10
CN33
11 12 13 14 15 16 17 18 19 20
TV MAIN BOARD
22207D-1
7 6 5 4 3 2 1
1 2 3 4
CN6
CN11
4942096
CN9
CN19
CN21
CN2
CN5
1 2 3 4 5 6 7 8 9
1 2 3 4
1 2 3 4 5
RXO0-_DR7
1
RXO0+_DR6
2
RXO1-_DR5
3
RXO1+_DR4
4
RXO2-_DR3
5
RXO2+_DR2
6
GND
7
RXOC-_DR1
8
RXOC+_DR0
9
RXO3-_DG7
10
RXO3+_DG6
11
RXE0-_DG3
12
RXE0+_DG2
13
GND
14
RXE1-_DG1
15
RXE1+-_DG0
16
GND
17
RXE2-_DB7
18
RXE2+_DB6
19
RXEC-_DB5
20
RXEC+-_DB4
21
RXE3-_DB3
22
RXE3+_DB2
23
GND
24
MSEL
25
NC
26
SVA/CMO
27
NC
28
PANEL_PWR
29
PANEL_PWR
30
1 2 3 4 5 6 7 8
STBY P_+5V P_+5V GND GND GND +12V_IN +12V_IN
AR_0 AL_0 GND CVBS_0 GND DVD/DVB_ASPDIF VGA_AL GND VGA_AR
SPEAKER_AR AMP_ROUT­AMP_LOUT­SPEAKER_AL
5VEXT LED-G LED-R IR GND
RXO0-_DR7 RXO0+_DR6 RXO1-_DR5 RXO1+_DR4 RXO2-_DR3 RXO2+_DR2 GND RXOC-_DR1 RXOC+_DR0 RXO3-_DG7 RXO3+_DG6 RXE0-_DG3 RXE0+_DG2 GND RXE1-_DG1 RXE1+-_DG0 GND RXE2-_DB7 RXE2+_DB6
G2216-0
RXEC-_DB5 RXEC+-_DB4
Adapter Plate
RXE3-_DB3 RXE3+_DB2 GND MSEL NC SVA/CMO NC PANEL_PWR PANEL_PWR
A\V INPUT BOARD
7153D-1
4941456
SPEAKER
REMOTE BOARD
B2216K-0
4942095
Display component
V216B1-L01 22 inch TFT
1210585
52207D-3
4941458
POWER& INVERTERBOARD
- 15 -
MOTOR
DETECT
CHUCK/TRAY
LOADING
frame
M
circuit
open/close
Loader
2D153D-3
DVD Main Board
Tray
PDIC
DVD/CD
INLIMIT
A/B/C/D/E/F
COIL
TRACKING
COIL
FOCUS
M
D5954
SLED MOTOR
MOTOR
SPINDLE
LOADER PART
Circuit
M
Reset
URST
SDRAM
FLASH
U53
U40
J6
SCART
J4
VGA
J8
HDMI
HDMI_SDA/HDMI_SCL
DDCSDA/DDCSCL
3.1.2 Over all block diagram.
VGA_RED/VGA_GREEN/VGA_BLUE/VGA_HSYN/VGA_VSYN
24C01
HDMI1_RTX/HDMI1_GTX/HDMI1_BTX/HDMI1_TXC/HDMI1_LK IN
24C04
MT1389HD
U30
U33
SDA/SCL
KEY
USB
BOARD D153D-0
CS5340
U1
USB/KEY
EEPROM
SC_RED/SC_GREEN/SC_BLUE
DVD_Y/DVD_PB/DVD_PR
89AL/89AR
ASPDIF
U10 MC4558
OKA
MC4580
BOARD
AV INPUT
AR_0
AL_0
U44
PS25LV040
Serial flash
SC_LOUT
MIC_1
MIC_2
U4
FSAV330
U17
DVD_AR/DVD_AL
CD4052
SC_ROUT
MIC JACK
MUX_PR
MUX_Y
MUX_PB
CVBS_0
MUX_AR
DVB BLOCK
HDMI_SDA/HDMI_SCL
VGA_AL/VGA_AR
U21
MUX_AL
SC_CVBS
ESD
SC_AR/SC_AL
VGA IN
D17-D23
CM2021
U28
HDMI IN
MC4558
TU1
MC4558
AMP_ROUT
17
14
U12
TUNER
U12
AMP_LOUT
8
U8
15
SC_AL_OUT
SC_AR_OUT
TV_CVBS
TV_MONOIN
AMP_AL_OUT
AMP_AR_OUT
TDA7266
Amplify
Audio
2
1
MST9E19A
Tv Main Board 22207D-1
ON/OFF
SDA
SCL
24C04
KEYS
HDMI
U48
EEPROM
24C32
U49
IR
B2216K-0
REMOTE
BOARD
KEY
4153D-0
BOARD
TV KEY
LVDS
PANEL
INVERTER
@52207D-1
BOARD
INVERTER
- 16 -
3.1.3 System control/signal processor block diagram.
control circuit
Display power
voltagecircuit
of boost
Control circuit
circuit
Power control
INVERTER_ON/OFF
PANEL_ON/OFF
POWER_ON/OFF
circuit
Audio output
circuit
Mute control
AMP_MUTE
AMP_STBY
selection circuit
A/V input
CD4052
FSAV330
AV_SEL2
AV_SEL1
RESET CIRCUIT
U18 MAX810
MST_REST
BOARD
DVD MAIN
2D153D-3
U30 24C04
4153D-0
DVDSTB DVDSDA DVDSCK
JACK
HDMI INPUT
HDMI_SCL
HDMI_SDA
HDMI_HPDCTRL
BOARD
DVD KEY
KEY1
KEY2
STBY_KEY
CEC
205
113 114 115
15
14
148
154
125
126
147
146
149
160~185
49
51
150
29~32 34~35
45
39
145
153
MST9E19A
10~11 7~8
1~2 14~15 4~5
22~28 16~17
117
116
SPI_CZ
123
SPI_DO
124
SPI_DI
122
FLASH_WP
143
SPI_CK
121
EEPROM_WP
90
132
131
144
132
131
132
131
72
73
74
75
SCL
SDA
HDCP_WP
SCL
SDA
SCL
SDA
1
SERIAL FLASH
U4 PS25LV040
2
5
3
6
U49 24C32
EEPROM
7
6 5
HDMI KEYS
U48 24C04
7
6 5
TUNER
4 5
TU1
TV_MONOIN
SC_SR
SC_AL
DVD_AR
DVD_AL
MUX_AR
LVDS
9E19_CVBS
SCART_CVBS
External input video
TV_CVBS
TO PANEL
TO VIDEO BLOCK
HDMI_IN
VGA_IN
Y PB PR_IN
MUX_AL
AMP_AR_OUT
TO AUDIO BLOCK
SC_AL_OUT
SC_AR_OUT
AMP_AL_OUT
- 17 -
terminal
External input
TUNER
TU1
13
14
CN7
2
1
AL_0
TV_MONOIN
TV_SVIF
11
4
CD4052
3
54/55
61/62
64
PC AUDIO
7153D-0
S/PDIF
9
6
7
VGA_AR
VGA_AL
AR_0
14
5
216
ASPDIF
DVD/DVB_
U21
13
MUX_AL
MUX_AR
MST9E19A
63
CN33
MT1389
circuit and mute control circuit.
210
215
224
226
89AR
amplify circuit
MC4580Audio
U10
DRIN
3
1
DVD_AR
66
67
209
221
89AL
ACLK
AMDATA
ABCK
ALRCK
CS5340A/D
conversion
U1
DLIN
DVD_AL
OKA
19
OKA
and composed of audio source input selection and NICAM processing circuit, audio amplifying
3.1.4 Audio block diagram.
Audio processing circuit is mainly responsible for the switch, amplifying and restire of audio
69
68
SC_AR
SC_AL
4
2
SCART JACK
74
73
72
SC_AL_OUT
SC_AR_OUT
Audio output
U13 MC4558
circuit
Amplifying
SC_ROUT
SC_LOUT
3
1
75
AMP_AR_OUT
AMP_AL_OUT
amplifying circuit
KARAOKE
U44
amplifying circuit
Audio
U12 MC4558
AMP_ROUT
AMP_LOUT
17
8
TDA7266
amplifying
Audio
JI MIC1
J12 MIC2
U8
20
CN19
19
6
SPAKER_AL
5
AMP_ROUT-
AMP_LOUT-
SPAKER_AR
J1
AMP_LOUT+
AMP_ROUT+
SPEAEK_AR SPEAEK_AL
- 18 -
SPEAKER
HDMI INPUT
HDMI
J1
TUNER
TU1
JACK
SCART
MT1389
3.1.5 Video block diagram.
19
20
HDMI1_SCL_O
HDMI_SDA_O
6
5
24C04
U30
CM2021
ESD
U28
TV_CVBS+/TV_CVBS-
15
_ OUT
SC_CVBS
circuit
Amplifying
CVBS_OUT
11
12
14
6
5
SC_CVBS+
HDMI_RTX2+
HDMI_RTX2-
HDMI_GTX1+
HDMI_GTX1-
HDMI_BTX0+
HDMI_BTX0-
HDMI_TXCLK+
HDMI_SCL
HDMI_SDA
HDMI_TXCLK-
9E19CVBS
MST9E19A
11
7
DVD_CVBS+
SC_GREEN
SC_BLUE
SC_RED
5
DVD/DVB_CVBS
2
5
13
FSAV330
DVD_PB
DVD_PR
DVD_Y
11
9
DVD/DVB_PR
DVD/DVB_PB
10
6
CN33
7
DVD/DVB_Y
3
picture processing circuit and video output circuit.
tuner, and the drive processing of LCD screen, including video input selection, video A/D conversion circuit, LCD
Video circuit is mainly responsible for the input of external video signals, the processing of video signals send from
U17
9
7
MUX_PR+/MUX_PR-
4
MUX_PB+/MUX_PB-
SOY/MUX_Y+/MUX_Y-
51
49/50
1
2
4
5
7
8
10
11
14~15
25~26
27~28
16
17
24C21
U33
VGA_VSYN
VGA_HSYN
DDCSCL
DDCSDA
13
14
RGB INPUT
VGA JACK
22~24
VGA_GREEN+
VGA_BLUE+
3
VGA_RED+
2
1
47
PANEL_PWR
PANEL_PWR
28
29
30
PANEL_PWR
PANEL_PWR
GND
NC
NC
SVA/CMO
MSEL
RXE3+_DB2
RXE3-_DB3
22
23
24
25
26
27
NC
NC
SVA/CMO
MSEL
GND
RXE3+_DB2
RXE3-_DB3
RXEC+-_DB4
RXEC-_DB5
20
21
RXEC+-_DB4
RXEC-_DB5
34~35
RXE2+_DB6
GND
RXE2-_DB7
RXE1+-_DG0
15
16
17
18
19
RXE2+_DB6
RXE2-_DB7
GND
RXE1+-_DG0
22INCH TFT
V216B1-LN1
29~30
GND
RXE1-_DG1
RXE0+_DG2
RXE0-_DG3
12
13
14
RXE1-_DG1
GND
RXE0+_DG2
RXE0-_DG3
component
Display
31~33
RXO3+_DG6
RXO3-_DG7
RXOC+_DR0
GND
RXOC-_DR1
RXO2+_DR2
RXO2-_DR3
RXO1+_DR4
RXO1-_DR5
RXO0+_DR6
RXO0-_DR7
10
11
RXO3+_DG6
RXO3-_DG7
RXOC+_DR0
RXOC-_DR1
GND
123456789
RXO2+_DR2
RXO2-_DR3
RXO1+_DR4
RXO1-_DR5
RXO0+_DR6
RXO0-_DR7
J4
- 19 -
AC IN
Net filter
3.1.6 Power line block diagram.
HGND
MCP1351P
U101
Q101
HGND
PANEL
RTN
HV
T101
Transformer
circuit
Filter
circuit
Filter
INVERTER CIRCUIT
POWER&INVERTER BOARD
Sampling
circuit
+5V
+12V
circuit
stabilization
Voltage
CN102
2
3
456
_ON/OFF
P_+5V
POWER
7
8
+12V
SI9435DY
Q33/Q8
DVD MAIN BOARD
+12V
MC4558
U10
SDRAM
U40
D5954
CS5340
1
CN30
2/3
PICK_UP
+5V
U45
+5V
AP1506
U52
module
DVB
3.3V_STB
CD4052
U21
+12V
PS25LV040
MC-4580
U12
U4
control circuit
Standby
TDA7266P
TUNER
TU1
24C32
U49
U8
U1
circuit
open/close
Tray
FLASH
U53
24C16
U7
DVD LOAD
FSAV330
U17
MC-4580
Cm2021
U28
U44
ESD circuit
5VSTB
BOARD
circuit
Reset
MT1389
DVD_+3.3V
AK18
U57
DVD_+1.8V
AK33
U56
USB&KEY
DVD_+3.3V
SI9435DY
U2
_pwr
Panel
MST9E19A
MC-4580
U12
U11
24C21
U33
+1.9VDDC
AZ1084
Display
U6
AZ78L05
U34
- 20 -
Section Two Troubleshooting flow chart
[ Flow chart 1 ] Trouble symptom: standby light is not on
Trouble description: connect with power, standby indicator light is not on, machine has no response
and buttons have no function.
Machine not power on
Whether
12V voltage
outputted by power
board is
normal
Y
Check
whether U34 pin 3
12Vvoltage is
normal
Y
Check
whether U52 pin 1
5V voltage is
normal
Y
Check
whether power
supply of pin 2 of U52
is normal
Y
Check
whether power
supply of MST9E19A
is normal
N
Check power board
N
Check flat cable from power board to video main board
N
N
Change U34
Replace U52
N
Check power supply circuit
of MST9E19A
Y
Check
whether reset
signal of MST9E19A
is normal
Y
Check
whether X1clock
signal is
normal
Y
Change MST9E19
N
Check reset circuit
N
Check clock circuit
- 21 -
[ Flow chart 2 ] Symptom: power not on
Trouble description: test after machine power on, standby indicator light is not on and +12V power
outputted by power board is abnormal.
Power not on
Check fuse, Ce101 and rectifying bridge
Check NCP1351 and peripheral elements
Change Q101
Check
whether power
board Ce123
has 12V voltage
Y
Check whether circuit from power board to video main board is normal
N
Check
whether power
board Ce101 has 310v
voltage
Y
N
Check
whether each pin
voltage of U101 is
normal
Y
N
Check
whether Q101 is
damaged
N
N
whether 12v
resistor to ground
is normal
Check whether
Cr120 has voltage output
whether operating
voltage of U122
is normal
Check feedback loop
Check
Y
Y
Check
Y
Check whether filtering capacitor
N
N
CE121/CE122/CE123
has electric leakage and
short-circuit
Check sampling circuit
Change transformer
N
whether transformer
is normal
Y
Check
Y
END
- 22 -
[ Flow chart 3 ] Symptom: no sound
Description: there is image, but no audio output.
All input source has
no sound output
Y
Check
whether pin 74/75
of MST9E19A has signal
output
Y
Check
whether power
supply of power amplifier
board TDA7266 is
normal
Y
Check
whether TDA7266_11
pin is high level
Y
Check
whether audio output
pin waveform of
TDA7266P is
normal
Y
N
N
N
N
Check MST9E19A and peripheral elements
Check power supply loop of TDA7266
Check mute control circuit
Change TDA7266P
Check speaker and line
- 23 -
[ Flow chart 4 ] Symptom: white screen
Description: screen is white and indicator on.
White screen
Check
whether u2_D
voltage is
normal
Y
Check
whether 3.3V
voltage of pin 2 of
U52 is normal
Y
Check
whether 1.9V
voltage outputted
by U6 is normal
Y
Check
whether X1 clock
is normal
Y
N
N
N
whether u2_G pin is
Change U52
Change U6
N
Check X1/C103/C104
Check
low level
Y
Change U2
N
Check Q5 and peripheral elements
Check
whether U11_146
(PANEL_ON) is low
level
Check
whether Q5_C is
high level
N
Change MST9E19A
Y
N
Check Q5 and peripheral elements
Y
Check
whether drive
output pin MST9E19A
outputs
normally
Y
Check
whether the socket
and flat cable from main
board to display screen
are normal
Y
Change display screen
N
Change MST9E19A
N
Change flat cable or socket
- 24 -
[ Flow chart 5 ] Symptom: black screen
Trouble description: after power on, screen has no display and backlight cannot be on.
Black screen
After
power on, whether
indicator circuit working
is normal
Y
Check
whether power
supply of U101 12V
power board is
normal
Y
Check
whether CN101_1is
high level
Y
Check
whether INVERTER
board has high
voltage output
Check according to
N
troubleshooting flow of “Machine cannot power on”
N
Check 12V power supply loop
N
Check INVERTER control circuit
N
Check INVERTER board
Y
Change display screen
- 25 -
[ Flow chart 6 ] Symptom: screen image flickers
Description: screen image flickers and sound is normal.
Screen image flickers
Check
whether screen
flickers under other
signal source
Y
Judge
whether it is the
back ground
light that flashes
Y
Change
inverter and check
whether it restores to
be normal
Y
Whether socket has 12v voltage
N
Check whether software version is correct
N
Check whether display screen flat cable contact is good
N
Check whether there is +12v voltage that outputs to inverter
- 26 -
[ Flow chart 7 ] Symptom: colour has distortion
Description: picture colour has distortion.
Colour has distortion
Y
Check whether the TTL output signal of
MST9E19A is
normal
N
Check whether clock frequency is normal
N
Check X1/C103/C104
Y
Check whether 3*8bit digital signal of Cn1 is normal
Y
Check
whether Cn2 has
rosin joint, false welding
and disconnected
pin
Y
Check
whether video flat
cable is disconnected
Y
Check
whether connecting
board has rosin joint and
whether socket has
disconnected
pin
Change MST9E19A
N
Check the path between MST9E19A and Cn2
N
Weld again and change socket
N
Change video flat cable
N
Change display screen
Y
Y
Check again
- 27 -
Loading...
+ 67 hidden pages