BBK 1931 Installation Instructions Manual

27427 BOSTIK COURT

TEMECULA, CA 92590

For any questions, email us:

[e-mail]

INSTALLATION INSTRUCTIONS
INS260

2015-2017 MUSTANG V6

OIL SEPARATOR KIT

Part # 1931

No Special Tools required

Install Time: Approximately 1 hour.

Diculty: Easy

IMPORTANT: All appropriate safety equipment and gear must be used during the installation of this or any BBK Performance products or any time you work on a vehicle.

BBK Performance Inc. accepts no responsibility for injuries or damage caused by or during the installation of this product.

WWW.BBKPERFORMANCE.COM

MADE IN U.S.A.

UPDATED LAST: April 2018

27427 BOSTIK COURT

TEMECULA, CA 92590

For any questions, email us:

[e-mail]

STEP 1

This picture (Note) As the arrow shows this is the draw side of the oil separator.

The hose that goes to the intake manifold will attach to this end.

STEP 2

STEP 3

sdfsdafasdf

dsafdsaf

sadfasdfa

STEP 4

Remove factory PCV hose then install Oil Separator Kit as shown in picture.

Making sure the shorter hose goes to intake manifold/draw side.

MADE IN U.S.A.

IMPORTANT: All appropriate safety equipment and gear must be used during the installation of this or any BBK Performance products or any time you work on a vehicle.

BBK Performance Inc. accepts no responsibility for injuries or damage caused by or during the installation of this product.

WWW.BBKPERFORMANCE.COM

Make sure to use supplied clamps at engine connections.

UPDATED LAST: June 2018